Plexform Incorporated

Plexform Incorporated Plexform designs and builds custom steel racks, bins, and packaging solutions that help companies handle, store, and ship their products more efficiently.

Standard racks look like the cheap option. Until you add up what they actually cost you like product damage from bad fit...
06/16/2026

Standard racks look like the cheap option. Until you add up what they actually cost you like product damage from bad fit, underused vertical space, wasted aisle width, and the racks you'll replace in three years anyway. Custom steel racks from Plexform cost more upfront. They also fit your products exactly, use your space properly, and hold up for years without swapping out components. The "cheaper" option usually isn't. Do the math at www.plexformps.com.

Off-the-shelf bins look fine on paper. Then you watch your team work around them every single shift and you see wrong di...
06/11/2026

Off-the-shelf bins look fine on paper. Then you watch your team work around them every single shift and you see wrong dimensions, bad visibility, and lids that don't quite close. Each workaround costs seconds, and seconds add up to real money over a year. Plexform builds heavy-duty custom steel bins fitted to your exact parts, your exact workflow, and your space. No improvising. No adapting. Just storage that works the way your operation does. Start the conversation at www.plexformps.com.

Most warehouses use less than half their vertical space, not because the ceiling is too low, but because the racks don't...
06/09/2026

Most warehouses use less than half their vertical space, not because the ceiling is too low, but because the racks don't fit the load. You're paying rent on air. Plexform's custom steel racks are built to your ceiling height, your product dimensions, and your pick frequency. Same footprint, more storage, faster picks. If you haven't looked at what custom racking would actually cost versus what you're losing, now's a good time. See the numbers at www.plexformps.com.

They should because you're buying from them every single cycle. Meanwhile, parts are arriving nicked, shifted, or vibrat...
06/04/2026

They should because you're buying from them every single cycle. Meanwhile, parts are arriving nicked, shifted, or vibration-damaged, and your team is breaking down boxes and hauling recycling every week. Custom returnable plastic packaging from Plexform gets molded exactly to your part geometry, survives your handling process, and returns empty and ready for the next run. You buy it once. It pays you back for years. Make the switch at www.plexformps.com.

When parts slip between shelves, bins tip during picking, or nothing's labeled because the current bins don't have a goo...
06/02/2026

When parts slip between shelves, bins tip during picking, or nothing's labeled because the current bins don't have a good spot for labels, that's not a training issue. That's a bin issue. And it's draining your inventory counts every single day. Plexform builds custom steel bins with drop gates, exact part sizing, and the visibility your team needs to work fast without losing things. Fix inventory shrinkage at the source. Visit www.plexformps.com.

Here's the thing nobody talks about: cardboard feels cheap until you add up what you're actually spending. Reorders. Dam...
05/21/2026

Here's the thing nobody talks about: cardboard feels cheap until you add up what you're actually spending. Reorders. Damage claims. The labor to break it all down. The space it wastes when it's empty.

That "affordable" option has a hidden monthly invoice — you're just paying it in pieces.

Custom steel returnable packaging from Plexform costs more upfront, yes. But it's designed for your exact parts, survives thousands of trips, and stacks when it's empty. Most customers stop buying single-use packaging entirely within a year.

Run the math at www.plexformps.com.

Every warehouse develops its own informal rules. Don't stack the heavy stuff on the top two bays. Stage the long product...
05/19/2026

Every warehouse develops its own informal rules. Don't stack the heavy stuff on the top two bays. Stage the long product in the aisle because nothing else fits it. Pull from the back first or the front collapses. That mental map your team carries around isn't clever logistics. It's just a bad rack that nobody's replaced yet.

Plexform builds custom steel racks to your actual products, ceiling height, and forklift reach. The workarounds disappear because the thing causing them does.

Get started at www.plexformps.com.

When parts come back damaged, the first call goes to the carrier. But most of the time the carrier isn't the problem. Th...
05/14/2026

When parts come back damaged, the first call goes to the carrier. But most of the time the carrier isn't the problem. The container is. Generic packaging has generic dividers, generic dimensions, generic foam. Close enough to ship — not close enough to protect anything that actually costs money.

Plexform builds custom returnable packaging around your exact part geometry. The right nest depth, the right dividers, the right wall thickness. Your parts show up the way they left.

See what's possible at www.plexformps.com.

Off-the-shelf rack load ratings are conservative by design. They're set for the customer who doesn't know exactly what t...
05/12/2026

Off-the-shelf rack load ratings are conservative by design. They're set for the customer who doesn't know exactly what they're storing, loads unevenly, and never inspects anything. That caution gets built into the spec, and you end up paying for capacity you can't actually use.

Plexform builds to your exact loads, your products, and your pick patterns — no safety margin for someone else's bad habits. You get more usable rack for the same footprint.

Learn more at www.plexformps.com.

Most companies are spending thousands every year on single-use packaging and just calling it a cost of doing business. B...
05/07/2026

Most companies are spending thousands every year on single-use packaging and just calling it a cost of doing business. But one-way packaging isn't cheap — it just gets expensed and forgotten.

Switch to custom steel returnable packaging and that cost almost disappears. One container handles hundreds of trips. No sourcing, no disposal, no damage claims.

Plexform designs and builds returnable packaging around your specific parts and workflows. Stackable, forklift-friendly, built to last. The ROI usually shows up within the first year.

See the numbers for yourself at www.plexformps.com.

Address

100-5063 North Service Road
Burlington, ON
L7L5H6

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm

Telephone

+18665017111

Website

,

Alerts

Be the first to know and let us send you an email when Plexform Incorporated posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Plexform Incorporated:

Shortcuts

Featured

Share

Category