Briss Moto

01/25/2025

Final result is pretty sweet 👌

M102 8v and 16v (different fl**ge on the 16v but exact same tubes)

Contact me for pricing and lead time.

01/18/2025

And for those who might be curious what the 3d printed assembly jigs look like for my turbo header.

Allows to place everything almost perfectly, and then place 3 tack welds on each joint. Then i remove the tube from the jig to weld completely.

01/18/2025

Almost done, will be delivered to customer next week.

Mercedes m102 8v turbo header.

Next on the list is to make the tooling to assemble the m103/m104 header.

12/13/2024

More projects i have been working on lately.

Turbo header for mercedes
M102 8v and 2.3-16, m103 and m104 incoming.

Working on the assembly jigs right now.

12/06/2024

Been working on a bunch of projets lately.

KTM / Husaberg / husky radiator fan mount for a Spal 5.2" pusher. Available on Cults3d

https://cults3d.com/en/3d-model/various/ktm-husaberg-husqvarna-radiator-fan-mount

10/02/2022

Shakedown sucessfull. Just need to make it pretty now.

Photos by Alexandre Poitras

09/24/2022

Just finished this amazing engine swap for a track bike.

Derbi GPR 50 with an RM125 engine. Weights 200 pounds and that year RM125 was rated for 41 hp... will make for an interesting ride 😅😈

Lots of custom parts had to be made, one of them being the intake duct between the air filter and carb. I scanned the bike with the 3d scanner, then it was an easy job to design the duct and 3d print it in flexible polyurethane.

I also re-used my mountainbike milwaukee battery adaptor and mounted it inside the chassis to provide power for the EGT gauge.

Still lots of work needed to make the bike clean. I'll be doing a shakedown run shortly and if everything goes well i'll take it all apart to send a bunch of parts to powdercoat/paint and have some bodywork repaired.

05/17/2022

My new high flow hot end fang for ender 3 is now available. More goodies to come in the following weeks :)

An other original Briss Moto design My designs are protected by copyrights laws. It is not authorized to distribute or sell any of my designs without prior written authorization from myself. Even if you modified my original design. Thank you New fang based on my original and popular design, made to....

02/17/2022

For those looking for a replacement water pump cover or a cover that clears the RZ350 oil pump (OEM not available anymore), i designed this to be 3d printed. I made a bunch of different designs (including a blank OEM replica) for the water pump cover and can do custom logos and such for a fee. Also included in the bundle, a proper replacement for cracking OEM neutral switch, and same design as a block off plate.

https://cults3d.com/en/3d-model/various/yamaha-banshee-rz350-water-pump-cover-and-clutch-cover-insert-neutral-switch?fbclid=IwAR3fzDoy6Dh0czMpQgidfangDlwmAsjuK-t4_THXRQusXO3Ftbut2RW0g14

01/20/2022

Made a little tool to make a nice radius in the domes. Pretty satisfied with the result. 👌