19/08/2025
*🔥💥MECERDES BENZ,VW DSG GEARBOX/TCM Repair PROBLEM/ SOLVING*-Read Carefully.
Is your Mecerdes Benz *7speed* gearbox giving you problems and in safe mode?Not Changing gears?Common in C from 2006/Cl/CLS,E from 2004/S/SLK/Ml164,G.
Is the Diagnostic report showing the following fault codes?
1. Y3/8N2 internal speed sensor?
P2766, P2767, P2200, P2201, P2768
Excessive RPMs have occurred at component Y3/8n2 (Internal speed sensor (VGS)) *
* The signal from component Y3/8n2 (Internal speed sensor (VGS)) is not available *
* Component Y3/8n2 (Internal speed sensor (VGS)) is defective *
2. Y3/8N1 Turbine Speed Sensor
P0715, P0717, P0718, P2204 , 2205
* The signal from component Y3/8n1 (Turbine speed sensor (VGS)) is not available *
* Component Y3/8N1 (Turbine Speed Sensor (VGS)) is defective *
*
3.Range Sensor (codes P0705, P0706, P2214)
Output Speed Sensor (codes P2206, P2207, P2550)
Variable Solenoid codes (P2110, P2115....)
For
A class and B class from 2005 to 2012
The first symptoms of s
Not changing gears well
Drives on safe mode
Jerking gearboxgear
Diagnostics faults:
P0793 — The rpm signal from component Y3/9b4 (CVT (continuously variable automatic transmission) secondary rpm sensor) is not available.
P0722 — The rpm signal from component Y3/9b5 (CVT (continuously variable automatic transmission) output rpm sensor) is not available.
For Vw DsG 6,7 speed
Symptoms
- vehicle not able to move
- vehicle may not start
- Tcm may not comunicate with diagnostic tool
- -may show fault codes relating to speed sensors, partial transmission
*ATTENTION*
1.Do computer diagnosis and show us(send by whatsapp) machine report screen shot or printout before removing the TCM,if we diagnose for you we charge P250 or more depending on location.
2.Make sure the wiring and solenoids are ok and tested by your mechanic/electrician.
3.Ask a knowledgeable/qualified Mechanic to to remove the TCM carefully to avoid damage and remove it completely from valvebody and bring it to us or send by bus/courier well wrapped to avoid damage if far.We will repair the TCM in a day and send/hand back.
4.Fitting and Removing must be done by a knowledgeable/qualified mechanic to avoid damaging it in the process.
5.We are mainly repairing the TCM/TCU for only the above mentioned fault codes
6.Repair price only starts *from P2500(only TCM repair)*
7.Transport costs are paid by the customer.
8.After fitting ,the fault codes must be erased with a proper diagnostic machine to avoid the faults showing again and causing limp mode.
9.Goods not collected withing 5days after notification of job completion will be charged a storage fee of P300 a day.IF NOT COLLECTED AFTER 10 DAYS OF NOTIFICATION,IT WILL BE SOLD to cater for the Costs.
10.All services must be paid for imediately upon completion or collection of Good.Exchanged with cash.Or before transporting the TCM/TCU back.
**Contacts*
Call/app74774030,Call 73648277
**Location*
Mogoditshane**
