Miorano Design

Miorano Design Manufacturer of high grade prepreg carbon fiber parts.

We offer a complete production cycle - engineering, 3D modeling, model creation, tooling/moulds and finished products.

✅ The quickest and fastest AWD car in Europe at 1/4 mile is back on the track at Santa Pod and won for second time 5-6 C...
05/06/2026

✅ The quickest and fastest AWD car in Europe at 1/4 mile is back on the track at Santa Pod and won for second time 5-6 Cylinder class at Doorslammers 2026!
✅ After season 2025 has ended, we started our work over the car body as we mentioned in our previous post.
✅ The main goal was to reduce the effect of drag by improving the body shape.
ℹ The steps we went through are as follows:
➡️ Laser 3D scan
➡️ 3D modeling
➡️ Wind tunnel simulation
➡️ 3D printed front end mock-up
➡️ Mould/tool creation
➡️ Carbon fiber front end production
✅ We also extended the side skirts and did a few more things with the side windows and floor.
⚠ Of course, all changes to the car are made for a specific purpose, but they do not violate the vision, as well as the height and length requirements.

✅ BMW M2 F87/M4 F82/M3 F80 front splitter⚠ Made of 100% Prepreg carbon fiberℹ Thikness 30mm/1,18inch❗ Very stiff and rig...
16/01/2026

✅ BMW M2 F87/M4 F82/M3 F80 front splitter
⚠ Made of 100% Prepreg carbon fiber
ℹ Thikness 30mm/1,18inch
❗ Very stiff and rigid
✅ Weight 7,1 kg/ 15,6 lbs

✅ Carbon fiber hull for a RC model race boat⚠ Aluminium tools/mouldsℹ Prepreg carbon fiber❗ Total weght 148 grams / 0,32...
14/01/2026

✅ Carbon fiber hull for a RC model race boat
⚠ Aluminium tools/moulds
ℹ Prepreg carbon fiber
❗ Total weght 148 grams / 0,32lbs

The quickest and fastest AWD car in Europe at 1/4 mile needs no introduction.To improve the results on the track, it is ...
15/10/2025

The quickest and fastest AWD car in Europe at 1/4 mile needs no introduction.
To improve the results on the track, it is not only horsepower and torque that are needed.
A little behind the scenes are the forces that affect the car at very high speeds, especially over 300 km/h.
Our goal is to improve performance by working on optimizing the shape of the body to reduce drag.
We started with a 3D laser scan of the car, created a 3D model and ran a wind tunnel simulation at 300 km/h.
The shape of the car is about to change, for which purpose it will be redrawn and simulated again until we achieve optimal results.
We will use a 3D printer to print the shape improvements and than make new molds.
Finally, we will make new carbon fiber parts and wait patiently for the 2026 season.

ℹ️ BMW M3/M4 F80/F82 carbon fiber GT4 brake cooling ducts!⚠️ Made of 100% prepreg carbon fiber!✅ Temperature resistance...
19/07/2025

ℹ️ BMW M3/M4 F80/F82 carbon fiber GT4 brake cooling ducts!
⚠️ Made of 100% prepreg carbon fiber!
✅ Temperature resistance 115C/239F
▶️ Weight: 0,05 kg/0,10 lbs
➡ Perfect choice for track day use.
❗From 3D printed part to a prepreg carbon fiber part.

ℹ Some of our prepreg carbon fiber products ready for delivery!✅ Mitsubishi Galant VR4 engine cover x3✅ Toyota Yaris GR ...
27/05/2025

ℹ Some of our prepreg carbon fiber products ready for delivery!
✅ Mitsubishi Galant VR4 engine cover x3
✅ Toyota Yaris GR cooling plate x2

ℹ️ BMW M3/M4 F80/F82 carbon fiber GT4 front splitter!⚠️ Made of 100% prepreg carbon fiber!✅ Temperature resistance 115C...
26/05/2025

ℹ️ BMW M3/M4 F80/F82 carbon fiber GT4 front splitter!
⚠️ Made of 100% prepreg carbon fiber!
✅ Temperature resistance 115C/239F
▶️ Weght: 1,8 kg/4,0 lbs
❗️ Epoxy based glue is used for bonding all the parts!
🚗 Including fasteners, plates and adjustment ropes.
➡ Perfect choice for track day use.

24/05/2025

ℹ We are proud that we were chosen by Konstantin Dinev Wienerson Gamlolt to create the carbon fiber body and the floor linings for this absolute beast on the 1/4 mile track!
✅ It is 3rd racing season with our body for the fastest Audi on the Planet!
💪 The car runs insane 215 mph (347kph) @ 6.78 sec on 1/4 mile tuned by
🎥 Look at this slow motion video where a lot of things happens during the run.

ℹ️ Seat Ibiza (6L 3-door) Carbon fiber doors!⚠️ Made of 100% prepreg carbon fiber!✅ Temperature resistance 115C/239F▶️ ...
14/02/2025

ℹ️ Seat Ibiza (6L 3-door) Carbon fiber doors!
⚠️ Made of 100% prepreg carbon fiber!
✅ Temperature resistance 115C/239F
▶️ Weght: 3,1 kg/6,8 lbs
❗️ Epoxy based glue is used for bonding outer and inner part!
🚗 Removable carbon fiber door card included.
➡ Ready for polycarbonate windows.

Address

26 Suedinenie Street
Branipole
4109

Opening Hours

Monday 09:00 - 18:00
Tuesday 09:00 - 18:00
Wednesday 09:00 - 18:00
Thursday 09:00 - 18:00
Friday 09:00 - 18:00

Website

Alerts

Be the first to know and let us send you an email when Miorano Design posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Miorano Design:

Shortcuts

Share

Category