MJ-Works

05/07/2026

To Finish of the project (for now 😉) I made a skid plate that protects the engine, oil hoses and exhaust.

06/04/2026

is ready for now because the needs attention since racing season is nocking on the door!
When I find the time I’d like to make extra fuel tanks at the back and a good skid plate.

04/04/2026

Small thing, BIG difference! With some help from a friend it was even nice to do 😅

28/03/2026

28/03/2026

Finished the wiring harnas, subframe tray, mounting for battery, regulator/rectifier, fuses, start relais, cable routing and…did a first test ride. A bit too loud (🫣) but no leaks on the new oil tank or exhaust. The 2 into 1 sounds superb…🎶🥰

18/03/2026

Finished the oil circuit connecting the new oil tank and the engine using AN hoses and fittings. There is a valve in there that makes sure the oil doesn’t flow to the engine when it’s not running or it would slowly fill up the sump. Also started work on the rear subframe to house the Li-ion battery and other electronics. Work has been halted for a while (pictures are at least 10 days old) but I’m going to try and have a testride before the end of this month…wish me luck 😉

22/02/2026

Finished the dry sump oil tank for the . SO much work but very happy with the result! Made all the individual parts out of billet on the lathe and mill. Fun jobs but time consuming ☺️

04/02/2026

Had some fun making the inlets for the oiltank on the out of billet aluminium. No CNC, just some turning and milling ☺️.