"Euro Style" Service Centre
all neseccary services for Your car
" Euro Style " Toyota Service has been opened on December, 1st, 2001 and is one of the best and professional service-centers in Azerbaijan.
* maintenance service and repair workshop - 350 sq.m;
* body repair and car painting workshop - 300 sq.m;
The service of cars is carried out in time, convenient for the owners. Before
realization Maintenance service or repair each automobile necessarily acts in a zone of acceptance for diagnostics and depending on results is sent in shop for realization of necessary works. For convenience of the visitors at the service centre is equipped with cafe and room of rest of the visitors, where there is an opportunity to observe of service of the automobile. If necessary or at the request of the visitor the service adviser can spend the owner of the car directly in a repair zone. For increase of a degree of service the experts of clients service conduct constant analytical work. With the purpose of maintenance of fast and qualitative repair of automobiles in shops the service equipment of conducting world manufacturers, such as is established: BANZAI, CAR-O-LINER, LUTRO etc. The metalwork tool FACOM and wide set of the special Toyota, Lexus & Daihatsu tools together with the highly technological equipment allow to make all complex of services on maintenance service and repair. The skilled mechanics, past training at the educational centre of Toyota, Lexus & Daihatsu Motor Corporation will undertake the responsibility for a serviceable technical condition of your automobile. Maintenance service and repair workshop includes 7 posts, on which the hydraulic lifts of manufacture of the Japanese firm BANZAI are mounted.
* 2-racks by carrying - capacity of 3.0 tons;
* plunger type by carrying - capacity of 3.5 tons;
In a separate industrial room there is a place for fast replacement of oil (for any cars at presence of the oil filter). For adjustment of corners of disorder of wheels of the cars the universal adaptive device of the Japanese manufacture (production of the "BANZAI" company is used. The 3D technology as much as possible simplifies work and reduces time of realization of measurements, simultaneously increasing accuracy of measurement and regulation of parameters. The analyzer in aggregate with "by an Intellectual Toyota, Lexus & Daihatsu tester" and other necessary equipment allows to estimate a general condition of the power unit, to reveal his malfunctions. For repair of injection systems of petrol engines the service station has the DACS stand intended for check both clearing all mechanical and electronically-controlled форсунок. To check are subject the following parameters of injectors:
- tightness;
- pressure of opening mechanical injectors;
- productivity;
- quality of dispersion;
If the repair of the engine or other units is necessary, its made in the specialized industrial room equipped with all necessary adaptations and the tool. At service station there is all necessary equipment for diagnostics, charge and repair of systems of airconditioning, which makes possible duly detection of outflow of a coolant and fast repair of system. For detection of lacks in fuel systems of diesel engines is applied DACS dizel tester , also allowing to check up and to establish optimum pressure of injectors. The device for balance from SANMAK allows to make balancing wheels not removing disks thus fixing special weight on the internal party of a disk. Following professional services available in our Service Centre:
High-quality installation of the additional equipment, accessories, audio-systems and all types of security and anti-thief complexes with a preliminary advice of the qualified experts. Due to significant capacity of workshop of repair and painting here can be served not only owners of Toyota, Lexus & Daihatsu cars, but also owners of cars of other brands and known manufacturers. Characteristics of workshop is complex equipment by the advanced process equipment and adaptations allowing to make repair any levels. For realization of repair of a body the workshop is equipped with the unique stand CAR-O-LINER (Swedish manufacture) well known in the world market. The Stand is equipped with universal measuring system allowing to spend maximum exact diagnostics of geometrical parameters of a body, defining measurements at once in 12 points. Exact, fast and continuous measurement during all cycle of editing - warranty and efficiency of carried out operations. For painting works the painting chamber LUTRO is used. Such chamber has the increased light exposure and has more powerful system of internal ventilation, that allows considerably to increase quality of painting works. Painting chamber makes possible realization of the advanced technology of painting is equipped with the separate drying chamber, that makes possible significant increase of productivity of carried out works. Besides at disposal of the experts of the centre there is a system of computer adjustment of a paint of Standox company allowing to capture all wide spectrum of colours of modern colourful manufacture.
