Hydra Blast Restorations

  • Home
  • Hydra Blast Restorations
Call Directions Website

Hydra Blast Restorations We are your surface prep specialists. •chemical treatment •laser cleaning•media blasting•paint

29/07/2026

Laser cleaning a mates cr80 he’s restoring for his son.
Ideally motor out of frame and fully stripped down for optimum results but this is just a quick clean up 🤙🏻
The beauty of laser is there is no damage to delicate welds making it ideal for bikes, bicycles, roll cages ect where weld material is critical!

26/07/2026

XD falcon for Billy's Garage 🤙🏻
This one was a mash up of epoxy and bondrite253 after the laser cleaning process.
A lot of shops are opting for this split to make doing work easier on bare metal panels,while keeping it rust free. Once repairs are done it then gets put into epoxy later on which streamlines the process and reduces material wastage👌

As always Protilt Towing moving this car around bad weather to keep it dry and safe 🙏

25/07/2026

2 Lasers and 2 bros having a wheelie good time 🤭
Cleaning up a set of Capri wheels

⚡️Laser cleaned⚡️No abrasives no chemicals just the power of light 🙌🏻
25/07/2026

⚡️Laser cleaned⚡️
No abrasives no chemicals just the power of light 🙌🏻

29/06/2026

Stripping down some delicate Datsun parts with our 1000w pulsed laser cleaner⚡️
Paint removed in the first pass on low power then tackling rust with a combination of anti-ox from Oxytech and the laser as the back of the grills were very tight and made it tricky to get the right angle with just the lasers alone.

The pressed wrinkle finish in the metal dash stayed 💯 👌

Hilux tub in for raptor liner to be removed as it was applied over bare metal allowing rust to form underneath.Paint str...
29/06/2026

Hilux tub in for raptor liner to be removed as it was applied over bare metal allowing rust to form underneath.

Paint stripped the bulk of the liner out to reduce the amount of fumes prior to commencing laser cleaning.
The settings used were for thin sheet metal but could be ramped up for solid steel trays where heat wouldn’t be a problem.

Once the metal was stripped back Oxytech easyphos was applied to keep the steel rust free for some fabrication.

Quick rip over Neil’s Mini Cooper motor to get it ready for some fresh paint with the lasers.We removed black rattle can...
29/06/2026

Quick rip over Neil’s Mini Cooper motor to get it ready for some fresh paint with the lasers.
We removed black rattle can over the top of the original thick orange enamel, grease and some powder coat.
The beauty of laser cleaners for engine cleaning is there is no media just light to do the work so they don’t need to be disassembled if not needed👌

04/06/2026

Getting a start on some panels off a tuff falcon build coming up for the team

31/05/2026

⚡️⚡️zapping exhaust headers⚡️⚡️

31/05/2026

Legendary 90s Nissan GTiR full laser clean and seal with black ppg epoxy

had pre paint stripped the roof and rh quarter panel as well as removing the beaver panel to access some of the rust. The underbody had also had a lot of the rubbery sound deadener as well which sped up the process 👌👌

Address


Opening Hours

Monday 07:00 - 17:00
Tuesday 07:00 - 17:00
Wednesday 07:00 - 17:00
Thursday 07:00 - 17:00
Friday 07:00 - 17:00
Saturday 07:00 - 17:00

Telephone

+61401515839

Alerts

Be the first to know and let us send you an email when Hydra Blast Restorations posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

  • Want your business to be the top-listed autos & automotive service?

Share