Discotune

Discotune High Performance Vehicle Upgrades, Customisation, and Maintenance advice and parts, workshop closed.

16/09/2024

Please be advised, we are currently not taking workshop bookings, as we are currently based in Europe while we are working in the WRC and ERC rally championships. We are still able to offer parts sales and tech support via email and direct message

[email protected]

Been quiet on the socials but we always get excited for Black Friday Specials. Kickstarting the sale we have some huge d...
19/11/2023

Been quiet on the socials but we always get excited for Black Friday Specials. Kickstarting the sale we have some huge discounts on Haltech products, with 5% to 40% discounts applied to most current Haltech products over the next week, get in touch via email or messenger for a personalised offer!

email: [email protected]

Congratulations to Matt Harvey Motorsport and the team on another podium finish, taking 2nd at the annual World Time Att...
02/09/2023

Congratulations to Matt Harvey Motorsport and the team on another podium finish, taking 2nd at the annual World Time Attack Challenge 2023 International Drifting Cup, great to see the success continue.

Hoping everyone is having a great weekend! We are offering some End Of Financial Year specials, specifically turbo kits ...
24/06/2023

Hoping everyone is having a great weekend! We are offering some End Of Financial Year specials, specifically turbo kits and Haltech products.

The first highlight is incredible savings on the Elite 2500 with Premium Harness package, if your planning a project for some winter wire ups in the shed, get in touch now to grab a free premium wiring loom! Retail over $3500 shipped, yours for just $2750 delivered. $750 saved instantly!

Ask about our bundles, maybe you need an IC-7, Wideband kit and Sensors for four figure savings!

The workshop is now closed, stripped and handed over to its new tenant. 14 Matthews Way was a dream workshop, thanks to ...
28/03/2023

The workshop is now closed, stripped and handed over to its new tenant. 14 Matthews Way was a dream workshop, thanks to my customers, friends and employees for the good times.

We are not taking on any contracts, but we are still supplying new parts and advice to our regular customers.

Until the next chapter!

The day that kickstarts many projects has arrived once again with our favourite Haltech products on saleSpecials include...
25/11/2021

The day that kickstarts many projects has arrived once again with our favourite Haltech products on sale

Specials include savings up to 20% off retail on Elite ECUs, 10% off retail on NEXUS VCUs, up to 15% on Plug'n'Play Adaptors and up to 10% on iC-7 Dashes.

Also discounted: Universal Looms, Bosch Widebands, and selected Merchandise items.

Let us know if we can hook you up!

https://www.haltech.com/product-category/black-friday-sale/

A pair of slick 1JZs we have constructed recently, with a range of custom work, running our usual catalogue of parts, pu...
19/09/2021

A pair of slick 1JZs we have constructed recently, with a range of custom work, running our usual catalogue of parts, pushing 350kw+ no sweat!

05/09/2021

Little video of the supercharged Viper V10 powered work ute rolling off the last power run. Now we need CAPA Performance to come good with some more pulleys, a few supporting modifications and we can tune the Haltech Nexus R5 up for more boost!

Check our last post for a few photos and details!

One of many large projects we have had on lately, this Dodge Viper V10 has just completed stage one, having ran in the f...
04/09/2021

One of many large projects we have had on lately, this Dodge Viper V10 has just completed stage one, having ran in the fresh engine on our custom Haltech Nexus package.

Some key features including loom with full sequential control of the Injector Dynamics id1050x, our direct fire coil conversion, and a flex fuel setup allowing ethanol blended fuels.

Running just 7psi peak boost and revving out to 6800rpm, any guesses how much power this big 8.3L dinosaur puts down?

Bit of surgery going down, Doctor Mitch swapping in some Kelford Cams springs and camshafts for this 1JZ VVTI. Not a wee...
27/08/2021

Bit of surgery going down, Doctor Mitch swapping in some Kelford Cams springs and camshafts for this 1JZ VVTI. Not a week goes by without a set of Kelfords going in lately!

11/07/2021

Head over to Matt Harvey Motorsport to follow his progress as he battles thru COVID lockdowns in his quest to drift all the things. We are running a soft tune up at the moment, feeding a maximum of 24psi thru the motor that Jhh Racing stuffed full of Nitto Performance Engineering and Kelford Cams parts for us. The new Holinger Engineering RD6S and 2JZ combo is controlled by our Haltech of course, with each up shift delivering more power to the tyres to keep the smoke show going, but delivering maximum drive in the lower gears!

27/06/2021

Really neat R33 our team completed an engine and driveline overhaul on, this is running some Kelford Cams, plazmaman.com intake manifold, 6boost manifold, Turbosmart gate and new Garrett - Advancing Motion G30-770. Our Haltech package is controlling the power delivery to a maximum of approx 350kw @ 7000rpm on 18psi using 98 fuel for the time being, this combo certainly delivers.

As usual, we supplied, fitted and finalised the car drive in, drive out with a whole host more work completed behind the scenes.

We are starting to take bookings for the remainder of the year

Address

Ulverstone, TAS
7315

Telephone

+61409631092

Website

Alerts

Be the first to know and let us send you an email when Discotune posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Discotune:

Shortcuts

Share

Category