Townsville ECU Cloning and Tuning Services

Directions

Townsville ECU Cloning and Tuning Services Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Townsville ECU Cloning and Tuning Services, Automotive, aircraft & boat, Townsville.

We offer a large range of services which include but are not limited to the following:
- ECU TUNING, CLONING AND REPAIRS
- TCM TUNING, CLONING AND REPAIRS
- BRAND NEW ECU SUPPLIES
- SECONDHAND ECU CLONING
- MAIL IN SERVICES
- GENUINE OEM DIANOSTICS

πŸ”§ TOWNSVILLE ECU REPAIRS & TUNING πŸ”§πŸš™ Mazda BT-50 – EDC16C7 ECU CloningAnother successful ECU cloning job completed, this...
15/10/2026

πŸ”§ TOWNSVILLE ECU REPAIRS & TUNING πŸ”§

πŸš™ Mazda BT-50 – EDC16C7 ECU Cloning

Another successful ECU cloning job completed, this time for a customer in Mackay, Queensland! πŸ’ͺ

This Mazda BT-50 came to us with an EDC16C7 ECU suffering from processor failure.

We were able to carry out the ECU cloning process, transferring the required data to get the replacement ECU set up for the vehicle.

βœ… Mazda BT-50 EDC16C7 ECU cloning
βœ… Processor failure solutions
βœ… ECU data transfer
βœ… Replacement ECU setup
βœ… Australia-wide ECU services πŸ‡¦πŸ‡Ί

πŸ“¦ Got an ECU that's failed and need a solution? We work with customers and trade workshops across Queensland and Australia, helping get vehicles back up and running.

πŸ“§ Email: [email protected]

Townsville ECU Repairs & Tuning
Specialist ECU repairs, cloning and automotive electronics.

πŸ”§ TOWNSVILLE ECU REPAIRS & TUNING πŸ”§πŸš— Holden Rodeo – EDC15M1 ECU CloningAnother successful ECU cloning job completed for ...
15/10/2026

πŸ”§ TOWNSVILLE ECU REPAIRS & TUNING πŸ”§

πŸš— Holden Rodeo – EDC15M1 ECU Cloning

Another successful ECU cloning job completed for one of our trade customers in Cairns! πŸ’ͺ

This Holden Rodeo's original EDC15M1 ECU had suffered water ingress, causing damage to the circuit board.

Despite the damage, we were able to clone the immobiliser data across to the replacement ECU, allowing it to operate as a plug-and-play unit without the need for additional immobiliser programming.

βœ… EDC15M1 ECU cloning
βœ… Immobiliser data transfer
βœ… Water-damaged ECU solutions
βœ… Plug-and-play replacement setup
βœ… Trade customer support
βœ… Australia-wide mail-in services πŸ‡¦πŸ‡Ί

πŸ“¦ Need help with a damaged ECU? We offer specialist ECU cloning and repair services for workshops and trade customers Australia-wide.

πŸ“§ Email: [email protected]

Townsville ECU Repairs & Tuning
Your ECU and electronics specialists.

11/10/2026

πŸ”§ TOWNSVILLE ECU REPAIRS & TUNING πŸ”§

πŸš— Electronic Steering Lock Emulator – Australia-Wide Supply! πŸ‡¦πŸ‡Ί

Having issues with a faulty electronic steering lock? We can help!

At Townsville ECU Repairs & Tuning, we supply electronic steering lock emulators to customers Australia-wide, offering a practical solution for a range of common electronic steering lock faults.

βœ… Australia-wide shipping πŸ“¦
βœ… Most units are plug-and-play
βœ… Designed for compatible vehicle applications
βœ… Avoid unnecessary delays waiting for parts
βœ… Mail-in and remote support available where applicable

πŸ”Œ Most units are ready to install, with no complicated programming required on compatible applications. Compatibility and any additional setup requirements depend on the vehicle.

πŸ“© Get in touch today! Send us your vehicle make, model, year and a photo or part number of your original steering lock so we can help identify the correct unit.

πŸ“¦ Based in Townsville, Queensland β€” supplying customers right across Australia!

πŸ“§ [email protected]

⚑ Hyundai ix35 BCM Repair – Key Stuck in Ignition? We've Got You Covered! ⚑Another successful repair completed here at T...
10/10/2026

⚑ Hyundai ix35 BCM Repair – Key Stuck in Ignition? We've Got You Covered! ⚑

Another successful repair completed here at Townsville ECU Repairs & Service!

This Hyundai ix35 came to us with a frustrating fault where the key was stuck in the ignition due to the shift lock system failing. After carrying out diagnostics, we traced the problem to a blown power management chip inside the Body Control Module (BCM).
upon inspection of bcm this is what we found.

Rather than replacing the entire BCM at significant expense, we performed a component-level repair, replacing the damaged chip with a brand-new unit. Once fitted and tested, the BCM was back to full operation, restoring normal shift lock function and allowing the key to be removed as intended.

The best part? This repair got a local Townsville business back on the road quickly, avoiding the cost and delays of replacing and programming a new BCM.

βœ… Component-level electronic repairs
βœ… BCM, ECU & TCM specialists
βœ… Cost-effective alternative to replacement
βœ… Fast turnaround times
βœ… Local repairs backed by expert workmanship

If your vehicle has electrical module faults, don't replace it until you've spoken to us. Many modules can be professionally repaired, saving you both time and money.

Townsville ECU Repairs & Service – Keeping North Queensland moving with professional automotive electronics repairs. πŸš—πŸ”§

10/10/2026

πŸš™ JEEP WRANGLER – GPEC2 BOOT MODE ECU WORK

Another Jeep Wrangler through Townsville ECU Repairs & Tuning for GPEC2 ECU work.

The ECU required boot mode access, allowing us to unlock the ecu for OBD2 Programming.

The vehicle was fitted with an aftermarket exhaust, so we reviewed the existing calibration and made the appropriate adjustments where required to better suit the vehicle's current hardware configuration.

The vehicle was then checked for diagnostic fault codes and correct operation following the calibration work.

πŸ”§ Work carried out:
βœ… GPEC2 Boot Mode Access
βœ… ECU Calibration Work
βœ… Calibration reviewed for aftermarket exhaust
βœ… Diagnostic checks
βœ… Final operation checks

Townsville ECU Repairs & Tuning
πŸ“§ [email protected]

ECU Repairs β€’ Cloning β€’ Programming β€’ Tuning

πŸ”§ FORD RANGER BCM REPAIR – MAIL-IN SERVICE πŸ”§Another Ford Ranger BCM successfully repaired by Townsville ECU Repairs & Tu...
01/10/2026

πŸ”§ FORD RANGER BCM REPAIR – MAIL-IN SERVICE πŸ”§
Another Ford Ranger BCM successfully repaired by Townsville ECU Repairs & Tuning.
This unit came to us with a U3000 fault code and the vehicle had no functioning headlights.
The BCM was removed and mailed to us for testing and repair. We diagnosed the fault, carried out the required repairs and returned the BCM directly to the customer’s door β€” getting them back up and running without the need to replace the module.
πŸ“¦ MAIL-IN ECU & BCM REPAIRS AVAILABLE AUSTRALIA-WIDE
βœ… Ford BCM repairs
βœ… U3000 fault diagnosis & repair
βœ… No headlights / lighting faults
βœ… Module testing & repair
βœ… Mail it to us from anywhere in Australia
βœ… Repaired and shipped straight back to your door
Having BCM or ECU issues? Send us a message before replacing the module β€” we may be able to repair your original unit.
πŸ“§ [email protected]
Townsville ECU Repairs & Tuning
πŸ”§ ECU β€’ BCM β€’ TCM Repairs & Programming

πŸ”§ FORD FESTIVA TCMs β€” IN STOCK NOW! πŸ”§Need a Ford Festiva TCM? Don’t wait weeks for one to turn up!At Townsville ECU Repa...
08/08/2026

πŸ”§ FORD FESTIVA TCMs β€” IN STOCK NOW! πŸ”§

Need a Ford Festiva TCM? Don’t wait weeks for one to turn up!

At Townsville ECU Repairs & Tuning, we keep brand-new Ford Festiva TCMs in stock and ready to go.

βœ… Brand New Units
βœ… In Stock & Ready to Ship
βœ… No Long Wait Times
βœ… No Mucking Around
βœ… Trade Customer Pricing Available
βœ… Shipping Australia-Wide
βœ… Local Supply & Installation Available

We understand how frustrating transmission faults can be for both workshops and customers. That's why we carry these units on the shelf β€” less waiting, faster repairs and your customer back on the road sooner.

πŸ‘¨β€πŸ”§ Trade customers: Contact us for competitive trade pricing.

πŸ“¦ Need one shipped? No problem β€” Australia-wide shipping available.

πŸ“ Townsville ECU Repairs & Tuning
ECU & TCM Specialists

πŸ“© [email protected]

Don't wait weeks β€” if you need a Festiva TCM, give us a call or message us today!

⚑ Hyundai ix35 BCM Repair – Key Stuck in Ignition? We've Got You Covered! ⚑Another successful repair completed here at T...
28/07/2026

⚑ Hyundai ix35 BCM Repair – Key Stuck in Ignition? We've Got You Covered! ⚑

Another successful repair completed here at Townsville ECU Repairs & Service!

This Hyundai ix35 came to us with a frustrating fault where the key was stuck in the ignition due to the shift lock system failing. After carrying out diagnostics, we traced the problem to a blown power management chip inside the Body Control Module (BCM).

Rather than replacing the entire BCM at significant expense, we performed a component-level repair, replacing the damaged chip with a brand-new unit. Once fitted and tested, the BCM was back to full operation, restoring normal shift lock function and allowing the key to be removed as intended.

The best part? This repair got a local Townsville business back on the road quickly, avoiding the cost and delays of replacing and programming a new BCM.

βœ… Component-level electronic repairs
βœ… BCM, ECU & TCM specialists
βœ… Cost-effective alternative to replacement
βœ… Fast turnaround times
βœ… Local repairs backed by expert workmanship

If your vehicle has electrical module faults, don't replace it until you've spoken to us. Many modules can be professionally repaired, saving you both time and money.

Townsville ECU Repairs & Service – Keeping North Queensland moving with professional automotive electronics repairs. πŸš—πŸ”§

πŸš— Mazda 3 TCM Specialists – Brand New Units In Stock! πŸ”§Is your Mazda 3 suffering from transmission issues? At Townsville...
25/07/2026

πŸš— Mazda 3 TCM Specialists – Brand New Units In Stock! πŸ”§
Is your Mazda 3 suffering from transmission issues? At Townsville ECU Repairs, we stock brand new Transmission Control Modules (TCMs) ready for immediate shipping Australia-wide or same-day local installation (subject to availability).
No waiting weeks for overseas orders or taking a chance on a second-hand unit.
βœ… Brand New TCMs βœ… Plug & Play – Pre-Programmed βœ… 12-Month Warranty βœ… Immediate Shipping Australia-Wide βœ… Local Supply & Installation Available
Common symptoms of a faulty Mazda 3 TCM include:
⚠️ Transmission warning light
⚠️ Harsh or delayed gear changes
⚠️ Vehicle stuck in limp mode
⚠️ No gear selection
⚠️ Intermittent shifting faults
⚠️ Communication fault codes
Our replacement TCMs are supplied ready to install, getting you back on the road with minimal downtime.
Australia-wide shipping available. πŸ”§ Local installation available in Townsville.

πŸ”§ ELECTRONIC STEERING LOCK FAILURES – WE'VE GOT YOU COVERED πŸ”§Is your dash showing a steering lock warning, or has your c...
24/07/2026

πŸ”§ ELECTRONIC STEERING LOCK FAILURES – WE'VE GOT YOU COVERED πŸ”§
Is your dash showing a steering lock warning, or has your car left you stranded with the ignition refusing to turn? You're not alone β€” electronic steering lock (ESL/ELV) failures are one of the most common issues we see here at Townsville ECU Cloning and Tuning.
⚠️ Common signs of a failing steering lock:
βœ… Car won't start / ignition doesn't respond
βœ… Steering wheel locked solid and won't release
βœ… Dash warning lights (steering lock or immobiliser symbol)
βœ… Intermittent faults that come and go
βœ… Grinding or clicking noise from the column on startup
These units wear out over time from everyday use, and once they fail, the car simply won't go anywhere β€” not exactly convenient when you need to get to work or school pickup!
πŸ“¦ WHY CHOOSE US?
We know how stressful a steering lock failure can be, so we keep the most common units in stock, ready to ship next day. No waiting weeks for parts to arrive from overseas β€” we get you back on the road fast.
Whether you need a replacement, repair, or cloning service to save your original vehicle data, our team has the experience and tools to sort it properly the first time.
πŸ“² Message us today or give us a call to check stock on your vehicle's steering lock and get a quote.

Address

Townsville, QLD
4810

Opening Hours

Monday 9am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 2pm

Website

Alerts

Be the first to know and let us send you an email when Townsville ECU Cloning and Tuning Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share