Vanelec auto electrics and off grid

Vanelec auto electrics and off grid Auto electrician with 15 years experience of specialist power systems and off grid in vehicles

I’m going to keep going with my hi lighting bad work. These connectors used to join cable outside. No wonder the light o...
17/07/2026

I’m going to keep going with my hi lighting bad work. These connectors used to join cable outside. No wonder the light on the end failed from water ingress.

📣 USE HEAT SHRINK TERMINALS OUTSIDE

Next in our series of why don’t my trailer lights work is this delight on a relatively new trailer.
16/07/2026

Next in our series of why don’t my trailer lights work is this delight on a relatively new trailer.

Who thinks it’s ok to use connectors like this to connect the additional position and turn signal lights in a bull bar? ...
28/06/2026

Who thinks it’s ok to use connectors like this to connect the additional position and turn signal lights in a bull bar? I found this recently on a new build vehicle.

Sloppy work like this used to fail a lot but because LED lights use so little current it’s normally only coming to light (pun intended) when the water wickes up the wire into the factory harness. Then it really causes trouble.

Deutsch plugs were made for this, but they cost maybe $30 more on the $1000s job.

Out with the old 80W panel and in with the new Exotronic 250W panel. Not all caravans need a $25k power system. At VanEl...
26/06/2026

Out with the old 80W panel and in with the new Exotronic 250W panel.

Not all caravans need a $25k power system. At VanElec we don’t sell you things you don’t need.

Don’t leave people guessing what that wire does! After trying cable numbers for a while we’ve now decided printed heatsh...
19/06/2026

Don’t leave people guessing what that wire does! After trying cable numbers for a while we’ve now decided printed heatshrink is the go to for clarity.

More in our “don’t do it like this series”. This trailer wiring got sliced off when it became trapped during a reversing...
10/06/2026

More in our “don’t do it like this series”. This trailer wiring got sliced off when it became trapped during a reversing jackknife. Just look at all the joins in the wire already, and the copper showing on the back of the plug.

Don’t do this 🤣. Do it right first time.

For the last 8 weeks we’ve had an array of warning lights on the Van Elec super Skoda. Today I had a rare day to work on...
14/05/2026

For the last 8 weeks we’ve had an array of warning lights on the Van Elec super Skoda. Today I had a rare day to work on my own stuff and there’s a clear instrument cluster once again 🥳

We can fix VAG cars with complex power steering, parking sensor and ESC faults. I still prefer creating off grid happyness for people though.

Now I have to pressure wash the squashed cane toads off the front of the car collected on a wet journey home from Ingham.

Looking forward to getting this project underway. Look at all that space! I guarantee it will soon be full. This will ha...
09/05/2026

Looking forward to getting this project underway. Look at all that space! I guarantee it will soon be full.

This will have a lot of exciting stuff: our DC switching system, remote monitoring, cameras, electric steps, spare wheel winch, big power system and lots more….. Watch this space.

Quick check on a system after two years of use. ✅Batteries healthy ✅Controlling fans with the Cerbo GX✅Solar working wel...
07/05/2026

Quick check on a system after two years of use.
✅Batteries healthy
✅Controlling fans with the Cerbo GX
✅Solar working well
✅Customer happy
✅Many kms of travel completed

We do the small details properly. Cable joins made strong with appropriate crimps. Why heat-shrink crimps inside? Becaus...
30/04/2026

We do the small details properly. Cable joins made strong with appropriate crimps. Why heat-shrink crimps inside? Because any mechanical force is applied to the PVC jacket rather than the joint itself.

I see so many problems resulting from joins done with wrong tools or wrong size terminals. Do it right first time.

✅ Right tools
✅ Right terminals
✅ Lowest failure risk

Address

Townsville, QLD

Opening Hours

Monday 8am - 4am

Website

Alerts

Be the first to know and let us send you an email when Vanelec auto electrics and off grid posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Vanelec auto electrics and off grid:

Shortcuts

Share

Category