BMWise

BMWise BMWise is your local go to BMW/MINI and European vehicle diagnosis/repair and service centre.

Ideally located in Artarmon, 10 minutes walk from the station, with over 40years of combined experience, we are your cost effective dealer alternative.

No matter how many screws BMW keep putting in their undertrays, we’ll always take them off to thoroughly inspect the veh...
23/04/2026

No matter how many screws BMW keep putting in their undertrays, we’ll always take them off to thoroughly inspect the vehicle properly. Nothing gets missed when the job’s done right. 🔧🚗

No matter how many screws BMW keep putting in their undertrays, and no matter how many trays and covers they put on, we’...
23/04/2026

No matter how many screws BMW keep putting in their undertrays, and no matter how many trays and covers they put on, we’ll always take them off to thoroughly inspect the vehicle properly. Nothing gets missed when the job’s done right. 🔧🚗

MechanicLife AutoRepair QualityWork UndertrayOff DoneRight

Vibration complaints aren’t always what they seem… 👀This MINI came in with a vibration concern — after inspection, we fo...
29/03/2026

Vibration complaints aren’t always what they seem… 👀

This MINI came in with a vibration concern — after inspection, we found a failed engine mount causing excessive movement under load.

Left unchecked, this can lead to:
⚠️ Increased vibration through the cabin
⚠️ Stress on surrounding components
⚠️ Further costly damage

Replaced and back to driving smooth ✅

If your car doesn’t feel quite right, don’t ignore it — small issues can turn big quickly.

📍 BMWise Service Centre
🔧 BMW & MINI Specialists

🚗🔧 BIG NEWS FOR BMW OWNERS 🔧🚗We’re excited to announce that we can now offer DME Cloning in-house!If your DME (engine EC...
16/02/2026

🚗🔧 BIG NEWS FOR BMW OWNERS 🔧🚗

We’re excited to announce that we can now offer DME Cloning in-house!

If your DME (engine ECU) has failed due to water damage, internal fault, or electrical issues — we can clone your original data onto a replacement unit, saving you time, money, and dealership headaches.

✅ Retains original vehicle data
✅ Faster turnaround
✅ Ideal for no-start, water-damaged, or corrupted DMEs

Whether you drive a daily 3 Series or a high-performance M car, we’ve got you covered.

If your BMW is cranking but not starting, has internal DME faults, or has been diagnosed with a faulty ECU — send us a message.

📩 DM us for bookings or more info.

🔧 BMW G01 X3 – Coolant Leak Diagnosis & Repair 🔧This G01 X3 with the B48 engine came in with a coolant leak. After press...
16/12/2025

🔧 BMW G01 X3 – Coolant Leak Diagnosis & Repair 🔧

This G01 X3 with the B48 engine came in with a coolant leak. After pressure testing and inspection, we traced the leak to the radiator and turbo coolant lines.

During the repair process, we also identified a hairline crack in the expansion tank. The tank was already heavily discoloured, a common sign of age-related degradation, and the coolant level sensor plug showed signs of internal corrosion. To ensure long-term reliability, the expansion tank was replaced as a preventative measure.

✔️ Radiator replaced
✔️ Turbo coolant lines replaced
✔️ Expansion tank replaced
✔️ Cooling system refilled and bled as per BMW procedures

Preventative maintenance like this helps avoid unexpected breakdowns and costly engine damage down the track.

📍 BMWise
77 Reserve Rd
Artarmon NSW

📞 9438 1669

BMW F32 420i in for a service, cooling system leak diagnosis, and preventative maintenance 🔧We carried out a full oil se...
16/12/2025

BMW F32 420i in for a service, cooling system leak diagnosis, and preventative maintenance 🔧

We carried out a full oil service and vehicle check, during which we identified a coolant leak from the water pump.

With the B48 engine being well known for having a weak cooling system, we recommended addressing the issue properly rather than replacing parts individually. The following components were replaced to ensure long-term reliability:

• Complete water pump with component carrier
• Oil filter housing
• Turbo coolant hoses showing early signs of leakage
• Additional coolant hoses as required

All work was completed using quality parts, followed by correct bleeding and checks to BMW specifications — helping prevent future failures and repeat repairs.

📍 BMWise
77 Reserve Rd
Artarmon NSW

📞 (02) 9438 1669

BMW G20 330i in this week for excessive vibration felt through the cabin.After thorough inspection, we traced the issue ...
10/12/2025

BMW G20 330i in this week for excessive vibration felt through the cabin.
After thorough inspection, we traced the issue back to a broken engine mount.

We replaced both engine mounts using genuine BMW parts, restoring smooth operation and eliminating the vibration completely.

For bookings or enquiries: 9438 1669
📍 BMWise
77 Reserve Rd
Artarmon NSW

Exciting news at BMWise — we now offer in-house FRM repairs!If your Footwell Module (FRM) has been corrupted, we now hav...
09/12/2025

Exciting news at BMWise — we now offer in-house FRM repairs!

If your Footwell Module (FRM) has been corrupted, we now have the capability to repair it right here at our workshop, saving you time and hassle.

Please note: Only corrupted FRMs can be repaired. Water-damaged units cannot be fixed.

Whether you’re a customer or another workshop needing this service, feel free to get in touch — we’re here to help!

BMW E60 N52 in today for an oil service and full inspection.During our checks we found the electric water pump was fault...
08/12/2025

BMW E60 N52 in today for an oil service and full inspection.

During our checks we found the electric water pump was faulting, and with the thermostat still being the original unit, we replaced both components as a preventive measure.
Cooling system was then correctly bled and vented as per BMW factory procedure to ensure proper flow and temperature regulation.

BMWise
77 Reserve Road, Artarmon
☎️ 9438 1669

BMW M2 – Front Brake Service 🔧Today we carried out a full front brake refresh on this BMW M2, replacing the front discs,...
07/12/2025

BMW M2 – Front Brake Service 🔧

Today we carried out a full front brake refresh on this BMW M2, replacing the front discs, pads, and wear sensor. All contact surfaces were cleaned thoroughly, and lubrication was applied exactly as per BMW’s specifications to ensure optimal braking performance and long-term reliability.

We also discovered the wheel lock bolts had been severely overtightened, which had damaged the customer’s wheel lock key. Using our specialised wheel-lock removal tooling, we safely removed the bolt without causing any damage to the wheel.

For bookings or enquiries, contact us on 94381669

Address

77 Reserve Road, Artarmon
Sydney, NSW
2122

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+61294381669

Website

Alerts

Be the first to know and let us send you an email when BMWise posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to BMWise:

Shortcuts

Share

Category