Magnum automotive fabrication

Magnum automotive fabrication At Magnum Auto Fabrication we make your ideas Come to life, stainless work, trays to exhaust work.

Message us today & let us help you create the ultimate ride. From Exhaust Upgrades to Custom Stainless Steel Work - We D...
13/02/2024

Message us today & let us help you create the ultimate ride. From Exhaust Upgrades to Custom Stainless Steel Work - We Do it All!

Recently we had nicks hilux in for some finishing touches on his complete front end overhaul and basic 12v setup to keep...
11/10/2022

Recently we had nicks hilux in for some finishing touches on his complete front end overhaul and basic 12v setup to keep him sorted until he gets the canopy built

This is one wild bit of gear and be sure to keep a eye out on the tracks for this beast in the future

Be sure to flick us a message for any of you 12v setups, modifications and fabrication needs.

Nick’s Hilux in for all the final touches on this complete front end overhaul.Contact us for any fabrication needs with ...
02/09/2022

Nick’s Hilux in for all the final touches on this complete front end overhaul.

Contact us for any fabrication needs with your 4wd or trailers

Hilux’s seemed to be the flavour leading out of last year here is 2 we had the privilege of working on The early girl wo...
15/02/2022

Hilux’s seemed to be the flavour leading out of last year here is 2 we had the privilege of working on

The early girl would have to be the straightest LN106 getting around we did a full suspension over hall with all the gear, IFS rears / extended shackles / inverted shocks / high steer / ifs steering box / new front shock towers / bump stops / banana shackles / brake lines and all the works basically

Then right to the other end of the spectrum we done this tray setup on a kitted out N80 with all the options under tray alloy box’s mounted water tank and compressor under the tray internal tie downs and slim line brackets to suit canopy

For any of your 4wd work needed don’t hesitate to contact us…

Another set of sliders and brush bars on this Big GU Ute Enquire today for your barwork, or any fabrication needs
13/09/2021

Another set of sliders and brush bars on this Big GU Ute

Enquire today for your barwork, or any fabrication needs

We have some goodies in the making for you patrol owners coming up...We have designed a sleek yet strong rock slider for...
15/08/2021

We have some goodies in the making for you patrol owners coming up...
We have designed a sleek yet strong rock slider for GU patrol coil cabs with three solid mounts and a slight kick at the rear to help protect the back of the cab a little more than what’s currently on the market

We should have 4 sets available for pickup or freight by mid next week.

Prices are

$700 raw
$800 sprayed black
(Still awaiting a price on powder coating)

This big GU patrol came to us with a set of sliders that had seen better days,Not to worry we got him sorted with a new ...
07/08/2021

This big GU patrol came to us with a set of sliders that had seen better days,
Not to worry we got him sorted with a new bomb proof set accompanied with some scrub bars to match.

Some custom lower shock mounts in the making for a custom rear end in a cruiser but wanting to retain the factory ends f...
01/08/2021

Some custom lower shock mounts in the making for a custom rear end in a cruiser but wanting to retain the factory ends for shocks

This brand spanking BT-50 came to us to make a rack to match the rear ladder rack for carrying  ladders and a rooftop te...
24/07/2021

This brand spanking BT-50 came to us to make a rack to match the rear ladder rack for carrying ladders and a rooftop tent,
While we were at it we also cut his tray sides down to make access to his canopy that little bit easier

A set of sliders and brush bars we did on this customers GU Ute, He also optioned for the weld in camburg mounts to the ...
21/07/2021

A set of sliders and brush bars we did on this customers GU Ute, He also optioned for the weld in camburg mounts to the bull bar for that sleeker look as well as being much stronger

If you have any enquires or after any work at all done on your rig or trailer don’t hesitate to contact us, as we are still open through this pandemic

Address

Sydney, NSW
2756

Opening Hours

Monday 8am - 4pm
Tuesday 8am - 4pm
Wednesday 8am - 4pm
Thursday 8am - 4pm
Friday 8am - 3pm

Telephone

+61431525541

Website

Alerts

Be the first to know and let us send you an email when Magnum automotive fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share