PID Diesel Engineering

02/09/2026

https://www.facebook.com/share/r/1JiHto1GnC/?mibextid=wwXIfr

27/08/2026

21/07/2026

2018 Silverado 2500HD 6 speed Allison in for a transmission rebuild.

First late 6 speed Allison we have stripped in house and the differences noticed from previous generations..

Input shaft and converter support on the end.
Gasket’s on valvebody separator plate, pto cover single sided.

Give it a few upgrades and back on the road..

14/07/2026

CHANGE FUEL FILTER 2024 MODELS RESET PROCEDURE

2024 GM truck with no fuel filter life on the cluster can be manual reset with this procedure

1. Turn on the ignition (service mode engine off)
2. The "Change fuel filter" message will show up on the dashboard
3. Press the brake and accelerator pedal at the same time for 10 seconds
4. Fuel filter change message will go off
5. Turn ignition off door open
6. Turn on the ignition again (service mode engine off)
7. Again, hold down the accelerator and brake pedal at the same for 10 seconds to reset
8. Fuel filter life has been reset

22/06/2026

Congratulations to the Clayton's Towing Xtreme Race team. Wil and Bowie have still got it after 14 years....

04/06/2026

Back on the road in 24 hours! 🔧🚗

This customer was stranded on the Sunshine Coast with a valve body issue and was told by a dealer there would be a 6-week wait just to look at the vehicle.

After being referred to PID Diesel by a friend, we diagnosed and repaired the issue, getting them back on the road the very next day.

They’ve been trusting us with all their mechanical needs ever since.

📞 Contact PID Diesel to schedule your vehicle appointment

27/05/2026

📣 ATTENTION: FORD F250/350 OWNERS 📣

We have a brand new set of Bushwacker Extend-A-Flares to suit Ford F250/F350 2023+ models left over from a recent suspension upgrade.

Includes:
✔️ Front & Rear Flares
✔️ Discounted Price
✔️ Ready to Go

If you’re interested in grabbing a set, send us an email at [email protected] for more information.

Limited to one set only — first in, best dressed!

23/05/2026

🚨PROJECT UPDATE🚨

🔥The RGM Racing buggy has begun its journey home to Townsville for the finishing touches to be completed, marking the start of an exciting adventure.

Thank you to everyone who contributed to and supported the build, and a big thank you Russ and Sarah for the opportunity given to the PID team.

Here's to a safe and successful trip north and a bright future for this exceptional buggy on the dirt. 🏆

Now let’s get Don River ready 🏁

08/03/2026

💥 Silverado Bash Plates 💥

Heading off-road or towing? Protect the underside of your 2020+ Chevrolet Silverado 2500 with heavy-duty bash plates.

📩 Message us today to book your install