Advance Motor Mechanics

Advance Motor Mechanics Your one stop mechanical workshop Check out the images to find some of the best presented, restored and fastest turbocharged cars in the country.

Advance Motor Mechanics was established in the 1960's at the current Strathfield South location, though the last 15 years has seen the business endure a fresh facelift thanks to experienced mechanics, George and Sam. Aside from their ability to service and maintain all cars, trucks and perform fleet maintenance, both the boys are keen motoring and bike enthusiasts with a much wider skillset than y

our average workshop. This is your one stop mechanical shop for gearbox, diff and engine rebuilding along with performance upgrades from wild to mild. Thorough service work without compromise show, good communication and end results of the big name workshops without the big name bill. Daily drivers, classic cars, motorcycles, all performance and turbocharged vehicles, trucks, vans, you name it...we can do it!

Time to get this party started.
28/08/2026

Time to get this party started.

Tubbed City 2J RX7.
24/08/2026

Tubbed City 2J RX7.

14/08/2026

It's been a while between updates.

We are in full swing at the shop. Last week we finished tuning Andrew's S14 which needed stack of upgrades including a subframe bracing modification. The alleged 3071 produced some spicy power through the Haltech on 32psi and E85.

Does your S-Chassis or R-Chassis have traction issues and isn't driving the way it should? Like many before it, it may b...
09/06/2026

Does your S-Chassis or R-Chassis have traction issues and isn't driving the way it should?

Like many before it, it may be suffering from worn bushes and / or a cracked subframe.

It's a dirty job but someone has to do it it!

We replace the bushes with aftermarket heavy duty (sometimes solid) bushes, then strip back the subframe, welding in a reinforcement brace kit. This allows them to take whatever you can throw at it. 1.1 60ft times, drift, thrash, you name it.

Contact us to get it fixed right the first time!

There's some side-by-side SR VE engine assembly taking place at the moment at the headquarters.We have an AMM700 SR22VET...
27/05/2026

There's some side-by-side SR VE engine assembly taking place at the moment at the headquarters.

We have an AMM700 SR22VET for a GTiR and something fresh you guys will probably be keen to see - an SR20VET 2.0 using the MT Performance VVL killer roller rockers.

In 26 years of working with SR20's, we have never sent a block off to KFC for machine work or their wedges, and we plan to keep it that way.

So we are going to fire ring the factory block using a copper gasket and Plazmaman girdle with a goal of 900hp on our Mainline hub dyno.

We will keep you posted on how this performs as we get closer to the tune time.

New signage on our new workshop located at 14/21 Marigold St Revesby.We are in full swing with servicing, performance bu...
12/05/2026

New signage on our new workshop located at 14/21 Marigold St Revesby.

We are in full swing with servicing, performance builds, wiring and tuning!

About to complete a couple more AMM700 builds and push an unsleeved block to new levels by our standards!

Contact us on (02) 97425468 or [email protected] for all enquiries.

23/04/2026

Not content with 3 figures, the Falcon has returned with a bigger Pulsar 1450hp turbo.

We cranked it to 40psi onto the single cammer to make 1057hp at the hubs through the TH400!

Time to send it off to Cootamundra!

We just finished assembling this tough 2JZ for an S15 with goals of 1500hp at the engine.It features plenty of tough par...
21/04/2026

We just finished assembling this tough 2JZ for an S15 with goals of 1500hp at the engine.

It features plenty of tough parts including a CNC ported head with oversized valves, Billet GSC cams and a copper gasket and fire ring setup.

Downstairs it has forged pistons and rods and is backed by a built TH400 gearbox with a transbrake and converter dumps.

We'll post some images as we carry out the engine swap and wire it up to tune the Haltech Nexus!

A precautionary tear down of our one of our 1000hp RB packages after a turbo failure. New oil lines, oil cooler, etc lea...
14/04/2026

A precautionary tear down of our one of our 1000hp RB packages after a turbo failure.

New oil lines, oil cooler, etc leaving nothing to chance!

12/04/2026

Long time customer Ric was back for a dual map tune in his single cam RB30 VL Turbo. A quick swap to a GTX3584R and E85 netted some awesome results through the C4.

On 31psi it delivered a stout 744whp after the necessary tweaks were made to the Haltech Elite ECU.

Address

14/21 Marigold Street
Strathfield South, NSW
2212

Opening Hours

Monday 7am - 6pm
Tuesday 7am - 6pm
Wednesday 7am - 6pm
Thursday 7am - 6pm
Friday 7am - 6pm

Telephone

+61297425468

Website

Alerts

Be the first to know and let us send you an email when Advance Motor Mechanics posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Advance Motor Mechanics:

Shortcuts

Share

Category