Extreme Custom Engineering

Extreme Custom Engineering Metal fabrication

Mal’s commodore fuel tank and filler tube all buttoned up this avo and ready to be picked up
20/07/2026

Mal’s commodore fuel tank and filler tube all buttoned up this avo and ready to be picked up

While I had access to the boot via the fuel tank hole before I finished the tank I thought id get stuck in to the braki...
17/07/2026

While I had access to the boot via the fuel tank hole before I finished the tank
I thought id get stuck in to the braking system and mount the booster above the diff and run all the stainless hardlines …..
Back on to the tank and filler tube set up 👍

Sharing the love around the workshop..Back on Mal’s commodore for the next week or so , fabricate a custom fuel tank and...
15/07/2026

Sharing the love around the workshop..
Back on Mal’s commodore for the next week or so , fabricate a custom fuel tank and filler tube set up is first on the list.
Next is mount the booster in the boot and plumb it in with stainless hard lines

Nigel’s monaro diff finished up and dummy fitted , back on the ground and rolling 💪
10/07/2026

Nigel’s monaro diff finished up and dummy fitted , back on the ground and rolling 💪

Wheels set up in the tubs for diff length and housing braced and machined ready for fabrication tomorrow
09/07/2026

Wheels set up in the tubs for diff length and housing braced and machined ready for fabrication tomorrow

Nigel’s monaro leaf spring relocation done . Few little mods to the boot floor for extra clearance as the springs have b...
08/07/2026

Nigel’s monaro leaf spring relocation done . Few little mods to the boot floor for extra clearance as the springs have been moved inboard quite a bit on this particular set up . Also did a spare wheel well delete as requested by Nige
Onto the diff housing and get this tuffy rolling 🔥🔥

55 mm Offset spring pockets fabricated to for Nigel’s monaro and existing hangers and mounts removed from the vehicle
06/07/2026

55 mm Offset spring pockets fabricated to for Nigel’s monaro and existing hangers and mounts removed from the vehicle

Start of another stuffy to hit the streets Nigel’s hg monaro in for a massive list of mods and upgrades.First up , full ...
03/07/2026

Start of another stuffy to hit the streets
Nigel’s hg monaro in for a massive list of mods and upgrades.
First up , full new rear end starting with a huge pair of hand fabricated mini tubs and a pair of fabricated rail doublers to take a 325/50 tyre

23/06/2026

Just a heads up
We will be closed tomorrow, Wednesday 24 th to take care of some family commitments
Back to normal Thursday
Cheers

On the home stretch now with Leeroy’s Monaro build . It will leave for a while to get wiring and engine work etc than wi...
17/06/2026

On the home stretch now with Leeroy’s Monaro build . It will leave for a while to get wiring and engine work etc than will come back later in the year for stage 2 …3 ….3 etc fab work 🔥🔥

Address

South Maclean, QLD
4280

Telephone

+61412432546

Website

Alerts

Be the first to know and let us send you an email when Extreme Custom Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category