Willy's Drop Shop

Willy's Drop Shop Willy's Drop Shop

Slamming and kustomising cars and bikes
And everything in between...

Pre '75 cars and bikes, custom air bag and suspension setups, right hand drive conversions, engine conversions

🍷 Cherry Wine 🍷 Greg recently brought his VS ute project to us for a complete redo. Y’all might remember this is the Ute...
29/05/2026

🍷 Cherry Wine 🍷

Greg recently brought his VS ute project to us for a complete redo.

Y’all might remember this is the Ute we built for Guy a few years ago to attack drag challenge!

Greg’s definitely mixed it up a bit with this reincarnation -

🍷Redo the sheet metal in the rear to hide the fuel system
🍷 Relocate the front strut towers to lay low with the 22” Simmons
🍷 Bagged all round
🍷 Abrasive blasted and repaired body

Plenty more jobs to go, looking too good to not share some progress shots!

Special thanks to my team and for all there hard work on this project!

4” buzz cut has  lil A model looking just right! πŸβœ‚οΈ
19/05/2026

4” buzz cut has lil A model looking just right!

πŸβœ‚οΈ

Render to Reality - Willy's Drop Shop 1969 VF Dodge Ute! We love a good Render to Reality post, so what better way to ki...
15/05/2026

Render to Reality - Willy's Drop Shop 1969 VF Dodge Ute!

We love a good Render to Reality post, so what better way to kick things off than with one of the crowd favourites from Meguiar's MotorEx

We first crossed paths with Will a few years back at MotorEx - starting things off with those COE renders you might remember. Right after that, we got stuck into something a little more personal: Will's own stunning '69 Dodge ute.

And honestly? It ticks every single box. Perfect stance, slant 6, all the right details - this thing was made for cruising the absolute wheels off. Seeing the vision come to life this cleanly never gets old.

14/05/2026

Was a privilege to be able to share the Van with everyone at Meguiar's MotorEx,
Absolutely blown away with the response from all the cars our team had on display for the weekend

Thanks guys!🍻

What a massive few months it has been getting the four cars to Meguiar's MotorEx! Firstly my team at Willy’s, Troy Rees ...
03/05/2026

What a massive few months it has been getting the four cars to Meguiar's MotorEx!

Firstly my team at Willy’s, Troy Rees and Gareth Hanks - these boys are so talented! None of this would have happened without them!

Luke Williams Autocraft for trusting us with the Metro project, it has been a massive 12 months picking up this project and getting it to where it is today.

Mick and Spencer at flash panels, putting in so many hours to get all 4 cars over the line.

Guy Thornell from Boss Mechanical & Performance, cheers mate for getting all the 203 horses outta that slant, doing the last few touches on the torry, oh and holding that pole up from falling at motorex! Great sport.

And mostly my amazing partner and best friend Tara Jones, for holding down the fort while I do stupid hours working on these projects.
You and the boys have supported me so much forever, but even more in the last few months. Thanks hun ❀️

So many more people to thank, it takes an army of good friends and clients to get these cars to this level, and I’m so grateful to have had this experience around motorex!

Cheers everyone

SILVER BULLET II πŸ›ΈThe team at Willyβ€˜s have been building this torana for the past 6 months.Fresh back from Flash panels,...
06/02/2026

SILVER BULLET II πŸ›Έ

The team at Willyβ€˜s have been building this torana for the past 6 months.
Fresh back from Flash panels, the final assembly and finishing touches are nearly done!

We have gone the full hog on this one:

πŸ— Strip and Abrasive blast car
πŸ— Rust repair and tap up body
πŸ— Rear rails and 4 link
πŸ— 9” and anti roll bar
πŸ— Full tubbed
πŸ— Clean sheet metal boot
πŸ— Shaved and custom bay
πŸ— stretch rear 1/4’s
πŸ— Custom back panel

πŸ— Jammed a Boss baby 427 dart special in there with all the fruit!

Thanks to everyone involved, we are excited to bring this little torry to motorex 2026!

πŸ›ΈπŸ’₯

Was a pleasure to be apart of the team building Ryan his VK for   38.πŸ΄β€β˜ οΈ Sand blasted the bodyπŸ΄β€β˜ οΈ Rust repairs through...
21/01/2026

Was a pleasure to be apart of the team building Ryan his VK for 38.

πŸ΄β€β˜ οΈ Sand blasted the body
πŸ΄β€β˜ οΈ Rust repairs throughout
πŸ΄β€β˜ οΈ Shaved & smoothed the engine bay
πŸ΄β€β˜ οΈ 5” intake pipe
πŸ΄β€β˜ οΈ Twin 3” exhaust

Dom’s C10 came to us for some fancy sheet metal and few upgrades. At further inspection, the Murica built chassis wasn’t...
22/10/2025

Dom’s C10 came to us for some fancy sheet metal and few upgrades.
At further inspection, the Murica built chassis wasn’t going to cut the mustard for the 1000hp+ LS.

So we πŸ‘‡

πŸ¦• Boxed and strengthened chassis
πŸ¦• Fabbed engine mounts
πŸ¦• Gearbox cross member
πŸ¦• Mount steering rack correctly
πŸ¦• New steering column
πŸ¦• Relocated rear bags
πŸ¦• Watts link and Revised 4 link
πŸ¦• 9” diff
πŸ¦• Wilwood brakes all round
πŸ¦• Firewall
πŸ¦• Seat belt mounts
πŸ¦• Big back window conversion

That’s a lot of dinosaurs, more to come, looking forward to seeing this beauty back on the road!

Thanks to our awesome team;



We recently Finished up Project Barry for . πŸ‹ Full round tubsπŸ‹ Sheet metal boot πŸ‹ 9” diff πŸ‹ Rail connectorsπŸ‹ 4 link and ...
21/10/2025

We recently Finished up Project Barry for .

πŸ‹ Full round tubs
πŸ‹ Sheet metal boot
πŸ‹ 9” diff
πŸ‹ Rail connectors
πŸ‹ 4 link and track locator
πŸ‹ Anti roll bar

The boys nailed this one! Thanks to for blowing over our sheet metal, for keeping the camp chair warm, for the Barry factor brackets, for the chance to tinker away at your project
And our team at Willy’s, and

#

Unfortunately we are Selling this project on behalf of one of our clients, as he is moving abroad.1948 COE truck, all bu...
30/07/2025

Unfortunately we are Selling this project on behalf of one of our clients, as he is moving abroad.

1948 COE truck, all built so far by Willys drop shop.
All the chassis and suspension work has been built to an engineers standard and has undergone extensive testing on components to ensure the new owner will be able to register.

Original chassis rails, smoothed, straightened, boxed new rear clip with a 9inch and rear duallys (F250 floating hubs)

Custom built rear tub

427 Ford Windsor
stroker engine. Dyno’d and built at Dandy engines
Airbag kit for all round with twin compressors and brand new elevel control system.
United speed shop custom front end, with flaming river steering rack and Baer brakes.
Engineered hub adapters to suit the Alcoa wheels
Fabricated alloy fuel cell with fuel pump
6 x 22 inch Alcoa wheels and tyres
Dakota Digital custom dash
New Custom bucket seats
Front visor
New hinges, hardware, engine mounts, cab mounts, steering box

Heaps of brand new parts to finish the build.
Lots of dollars have been invested into this project.

70k ono

Address

3/19 Industrial Drive
Somerville, VIC
3912

Opening Hours

Monday 8am - 5:30pm
Tuesday 8am - 5:30pm
Wednesday 8am - 5:30pm
Thursday 8am - 5:30pm
Friday 8am - 5:30pm
Saturday 8am - 12am

Telephone

+61478006927

Website

Alerts

Be the first to know and let us send you an email when Willy's Drop Shop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Willy's Drop Shop:

Share