JDMyard Pty Ltd

JDMyard Pty Ltd Honda Performance Specialist since 2002.

Australia Official Sole Distributor : Hardrace

Australia Official Dealer : Spoon Sports , Exceed , Hybrid Racing , Hasport , Rywire , Acuity , PRL , Hondata , Drag Cartel

Stockist :
Mugen - Toda Racing - OEM Honda - Goodridge - Skunk2 - Eibach - Walbro - Nardi Steering wheels - Personal Steering wheels - Koyo Radiator - Fujitsubo exhaust - Cusco - DBA - Motul - Rays wheels - Carbing - Karcep

t - Exedy Clutch - NGK - Ferodo - HKB - Aerocatch - H&R - Ogura Racing Clutch - Voltex - Supertech - Ferrea - Mishimoto - Injector Dynamics - APR -Tractuff - Invidia exhaust - Haltech - First Molding - CSF Racing Radiator - Elig Brakes - Intima - Project Mu - Endless - ACL -Alcon Brakes - Kelford Cams - P2R

BTS - World Time Attack Challenge TestingHardrace Suspension AustraliaYokohama Tyre-AustraliaAdam CasmiriKiety KietRace ...
31/08/2026

BTS - World Time Attack Challenge Testing

Hardrace Suspension Australia
Yokohama Tyre-Australia
Adam Casmiri
Kiety Kiet
Race Concepts
Speedfab Manufacturing
CGR Panel Paint Detail
Yonas Liu
Phil Armour
Griffin Motorsport
Aaron Casmiri
Jez
Plazmaman
BT Motorsport
Turbosmart
Sydney Composites
AWS Graphics
Prowraps And Graphics
Titan 7 Wheels
DC Oceanic
Elig Brake
909 Motorsport
Go Tuning Unlimited
Pointer Japan
Exceed Japan

A short glimpes and behind the scenes with the JDMyard / HARDRACE t...

The SPOON SPORTS Dealer Certified Vehicle program recognises vehicles that genuinely embody the Spoon Sports tuning phil...
27/08/2026

The SPOON SPORTS Dealer Certified Vehicle program recognises vehicles that genuinely embody the Spoon Sports tuning philosophy, or “Spoon-ism.”

In collaboration with Spoon Co.Ltd., each certified vehicle receives an official, unique serial-numbered plaque issued by us.

To ensure authenticity, qualifying parts must be purchased directly from SPOON SPORTS or an authorised global distributor or dealer, providing confidence that the vehicle meets the program’s standards.

PSA - Spoon Sports  #41000-FL5-000 (FK8/FL5) L.S.D Kit [RECALL NOTICE]As some of you might know, Spoon Sports investigat...
26/08/2026

PSA - Spoon Sports #41000-FL5-000 (FK8/FL5) L.S.D Kit [RECALL NOTICE]

As some of you might know, Spoon Sports investigated and confirmed that some units contain an internal side gear with dimensions outside the specified range, following customer reports that the left-side drive shaft may disengage when the product is installed.

In these affected units, the left-side drive shaft may not be securely retained and could disengage while the vehicle is being driven. This could result in a loss of driving power and possible transmission oil leakage.

The good news is none of the units we sourced from Spoon Sports prior to May 2025 have been affected.

We have reached out to several of you who have sourced the L.S.D kits from us, but if you have any questions or concerns, please do not hesitate to contact us.

Regards,
JDMyard Team

Introducing Remark Exhaust Systems - now available for Honda, Nissan, Toyota, Subaru, Mazda & Infiniti platforms. From r...
08/06/2026

Introducing Remark Exhaust Systems - now available for Honda, Nissan, Toyota, Subaru, Mazda & Infiniti platforms.

From refined street setups to aggressive performance sound, Remark delivers premium fitment, quality and tone enthusiasts love.

https://www.jdmyard.com/brand/remark/

You can now drive our 800hp WTAC spec EG Civic for less than $100. Forza Horizon
12/05/2026

You can now drive our 800hp WTAC spec EG Civic for less than $100. Forza Horizon

From in-game to real-life, the world's fastest cars now in FH6!

Play the Time Attack Car Pack and get behind the wheel of your favourite cars.

Then see them unleashed for real at WTAC this 4-5 September at Sydney Motorsport Park.

Tickets are live now - visit www.worldtimeattack.com/tickets

SPOON SPORTS has newly released the S-TAI FRONT BUMPER for the 11th generation CIVIC TYPE R (FL5).This product was metic...
26/12/2025

SPOON SPORTS has newly released the S-TAI FRONT BUMPER for the 11th generation CIVIC TYPE R (FL5).

This product was meticulously developed to maximize downforce and cooling performance. The front canard and floor designs underwent rigorous analysis to create optimal downforce without introducing unwanted drag. Given that front-engine, front-wheel-drive vehicles require sufficient weight distribution on the front axle, the newly designed bumper helps to secure this balance, achieving greater stability at high speeds. To improve the cooling efficiency of the radiator and intercooler, the air duct on the bumper has been reconfigured, which helps to minimize water and oil temperature increases under demanding conditions such as track driving.

With our track driving customers in mind, we have also secured dedicated space on both sides of the inner bumper for the installation of additional oil coolers. This available space is an ideal solution for endurance race participants and frequent track enthusiasts. Furthermore, brake cooling efficiency was improved by installing a brake duct with a 100mm maximum diameter, effectively helping to prevent fading during continuous driving sessions.

The development of this product is founded on our extensive experience gained from setting up our race car for the Super Taikyu Endurance Race Series. We initially focused on improving downforce, accumulating valuable data from numerous track testing sessions. This data acquisition also allowed us to pursue improvements in the cooling efficiency of the engine bay. This is truly a product born from our motorsport pedigree, achieving the highest levels of downforce and cooling performance. We hope you enjoy the driving experience provided by this functionality-focused aerodynamic bumper.

Product name:S-TAI BUMPER FRONT
Product number:71101-FL5-000
Compatible model:CIVIC (FL5)
Price: $4650 GST incl

SPOON SPORTS now offers the S-Tai Bonnet for the 11th Generation CIVIC TYPE R (FL5).This item is a must to keep the wate...
24/12/2025

SPOON SPORTS now offers the S-Tai Bonnet for the 11th Generation CIVIC TYPE R (FL5).

This item is a must to keep the water and oil temperature in check for track driving.
Before pushing your car hard, securing enough cooling performance is essential. Increasing the capacity of your radiator is a standard step in the right direction, but it’s often not enough. That is why we decided to develop this product.

The front bumper of the FL5 has sufficient fresh air intake capacity but the problem was efficiently venting the hot air out from the engine bay. The large air duct design of our new bonnet triples the amount of airflow out of the engine bay, greatly increasing the cooling efficiency necessary for demanding track driving conditions.

The air ducts on both sides not only facilitate the exit of heated air, but also effectively relieve air pressure from the wheelhouse. This helps to enhance downforce during high speed driving to improve overall handling stability. The bonnet is constructed from light-weight, durable FRP material.

When running our demo car continuously on track, overheating had always been an issue. While developing our radiators and thermostats, we came to realize that improving the efficiency of hot air extraction from the engine bay was a must. That is how we started our development of the newly designed bonnet. We tested the new bonnet on our S-Tai racing car and confirmed the significantly improved cooling performance, with zero overheating issues during the hot summer season races in conditions over 35℃ (95°F).

Many FL5 owners running their cars on track often install oil coolers to keep their oil temperature down. Our new S-Tai bonnet combined with an increased capacity radiator will enhance the oil temperature cooling performance, minimizing the risk of decreased oil pressure, thus ensuring stable, continuous performance.

60100-FL5-000 FRP with rain guards $5995 GST incl
60100-FL5-020 FRP without rain guards $5795 GST incl

Another year came and went, but it never truly ends. Thanks for the memories, laughs, and you guys who stand by us, day ...
18/12/2025

Another year came and went, but it never truly ends.

Thanks for the memories, laughs, and you guys who stand by us, day in, day out - can’t do what we do without your support.

We’ll be open tomorrow, but close from the 20th and will return on Jan 5th. Our webstore will still be taking orders, and they’ll be processed when we return, same with emails and any enquiries that come through during the holiday period.

Take care and drive safe! Happy Holidays 🫰

It’s official!Due to popular demand,  carbon bonnet for Non-Japanese Spec DC2 (AU/UK/US) are now available.*Early protot...
28/11/2025

It’s official!

Due to popular demand, carbon bonnet for Non-Japanese Spec DC2 (AU/UK/US) are now available.

*Early prototype version weight 8.5kg (OEM 14.5kg)

347 wkw  tuned by K1dd0 (rolling dyno) + suspension, brake and transmission upgrades for Mt. Panorama next week.- DIXCEL...
21/11/2025

347 wkw tuned by K1dd0 (rolling dyno)

+ suspension, brake and transmission upgrades for Mt. Panorama next week.

- DIXCEL Advanced Brake Technology - Australia
Specom β front pads + Type ES rears
- M&M pillow ball camber top plates
- Spoon Co.Ltd. 1.5 way L*D
- DC Oceanic Motul engine & transmission fluid service - 300v 5w40 / FF-L*D
- Corner weight & balance + alignment
- Diagnostic and final checks

Address

Unit 25/317/321 Woodpark Road
Smithfield, NSW
2164

Opening Hours

Monday 10am - 6pm
Tuesday 10am - 6pm
Wednesday 10am - 6pm
Thursday 10am - 6pm
Friday 10am - 6pm

Telephone

+61297572364

Alerts

Be the first to know and let us send you an email when JDMyard Pty Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to JDMyard Pty Ltd:

Shortcuts

Share