12/07/2024
Edelbrock 2892 manifold came in for porting to suit a 434 sbc nitrous engine. After having intake waterblasted the intake was flow tested on the afr 235 head with nitrous fogger plate and qft carby as a complete assembly to record cfm and air speed velocities. Then measuring of the runner lengths, cross sectional areas, runner volumes and runner taper were taken and adjusted as required to suit the engine combo. Finishing intake off in burr finish. The nitrous fogger plate did restrict being able to open up carby fl**ge as required.
If you need any flow testing carried out with full data sheet provided with test feel free to contact me.
