Parkers Shed

Parkers Shed Custom Automotive Fabrication and Welding

Recently finished up on this forged motor 86. Manifold to suit G30-900 turbo, and GFB wastegate with screamer. 3” stainl...
31/08/2026

Recently finished up on this forged motor 86. Manifold to suit G30-900 turbo, and GFB wastegate with screamer. 3” stainless exhaust all the way to the rear with a resonator and east/west muffler with some titanium look tips. Managed to squeeze the 4” thick Plazmaman cooler, then hot side piping, cold side piping with Turbosmart bov and intake pipe . Little custom windscreen washer bottle to make cooler pipes fit nicely

SR20 powered Celica in for a new G30-900 turbo and full 3.5” exhaust
15/07/2026

SR20 powered Celica in for a new G30-900 turbo and full 3.5” exhaust

12/06/2026

What an absolute vibe it was spending 10 days in Japan with the new car, drifting all the bucket list tracks and sight seeing with a bunch of legends. Car turned tyres for 3 entire track days without a single issue and I upskilled on my driving a heap. Big ups to the Drift Japan crew, you guys are absolute legends and run such an awesome setup.

Luke’s RB30 EH in for all the loving. Fitted a bigger Plazmaman cooler with hot and cold side piping, modified and fitte...
22/05/2026

Luke’s RB30 EH in for all the loving. Fitted a bigger Plazmaman cooler with hot and cold side piping, modified and fitted a dual pass radiator, 4” turbo back exhaust with bolt on/off side pipe and filled the old manual box hole on tunnel and fitted up the new shifter bracket.

Time attack Evo in to replace mid section that was stainless with some titanium to match the rest of the system and then...
06/05/2026

Time attack Evo in to replace mid section that was stainless with some titanium to match the rest of the system and then added a v-band for the rear section to muffler

Datto with billet SR in for 4” dump and 3.5” exhaust
01/05/2026

Datto with billet SR in for 4” dump and 3.5” exhaust

Had Jye’s jzx back in to fit another cooler and redo cold side cooler pipe along with modifying the throttle body to del...
23/04/2026

Had Jye’s jzx back in to fit another cooler and redo cold side cooler pipe along with modifying the throttle body to delete the traction control setup and make for a much sleeker look..

HZ premier in for a twin system and some stainless coolant piping
21/04/2026

HZ premier in for a twin system and some stainless coolant piping

How good?? So gud!! Brads forged 3rz hilux in for the works. Modified cooler inlet/outlets, hot and cold air cooler pipi...
27/03/2026

How good?? So gud!! Brads forged 3rz hilux in for the works. Modified cooler inlet/outlets, hot and cold air cooler piping, routed the wastegate port to suit and then did a full 3.5” turbo back system dumped at the diff.. keen to see what the new combo does!!

17/02/2026

Angry LS powered 86 in for some resonators and a couple of turn downs before diff, then re did the top rad piping to suit, making it much neater and not fouling on anything anymore

Address

7/25 Project Avenue
Noosaville, QLD
4566

Website

Alerts

Be the first to know and let us send you an email when Parkers Shed posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Parkers Shed:

Shortcuts

Share

Category