Pedal This Performance and Conversions

Pedal This Performance and Conversions Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Pedal This Performance and Conversions, Automotive, aircraft & boat, 66 old princes Highway, Murray Bridge.

04/06/2026

Cris' ba turbo in for a tune after installing a haltech 2500 plug and play, we originally had it heading out the door at 280kw on 10psi, we then took it for a road test and it was playing funny buggers in spots, a good reason why a road test after a hit on the rollers never going astray. A quick touch up again and now making 335kw on 14psi.

The boys and I have been working hard on the fab side to put the shop as one stop performance and fab shop in house, so ...
02/06/2026

The boys and I have been working hard on the fab side to put the shop as one stop performance and fab shop in house, so you dont have to take your car to 3 or 4 shops to get it all done. The poor work van had seen better days with a lot of neglect, so a quick call to JMC Performance & Fab for one of his killer high mount x series turbo manifold for that sick sound. And, out with the tig and angle grinders for us, now, we arent 100% where we want to be on the aliminium yet, but it wont take long to touch up the last bits to get the beads down pat, this is my first set of cooler pipes I've ever welded out in ali, only tackling thicker before. A quick tune in the next few days and away we go 🔥🔥

31/05/2026

I havent posted a lot about my 8hp/au irs/tube front and rear/maxx ecu etc swap, but, 13 days until it hits the track, how my throttle is going to work to take some of the thought process of changing gears mid corner with no hands on the wheel.... keen to see how it goes 🔥

22/05/2026

Brendans ba turbo drifter making some good numbers on low boost, 300rwkw on 7psi, tuned on the haltech 2500 plug and play, this just being the start of whats to come for this car 🔥 keen to spice it up when the time comes..

19/05/2026

A little bit of na + t info, a little bit of sohc, if you need more info, ask in the comments, some of it is a bit jumbled.

Adelaides unfinished town bike now nearly ready to hit the drift track, masons 929 barra turbo now running, a few jobs t...
18/05/2026

Adelaides unfinished town bike now nearly ready to hit the drift track, masons 929 barra turbo now running, a few jobs to tick off before it hits the rollers and then off for a track day or two 🔥

Codeys turbo au now ready for round 2 tomorrow, a 6 boost upgrade, psr top half and a tickle on the tune, now making 365...
15/05/2026

Codeys turbo au now ready for round 2 tomorrow, a 6 boost upgrade, psr top half and a tickle on the tune, now making 365rwkw on 13psi of boost, coming up from 302rwkw on 11psi. It went 340rwkw on the same boost it came in with.

I'm making a video on the small differences to help you lads with the na+t save some money long term and make it easier for whatever tuner you decide to pick, even if its not us 🔥

11/05/2026

Masons temu falcon now making the numbers it should 🔥 after rod knocking at sets until 6 he slapped a 430km bf motor in for the bend and decided to not worry about a tickle up on the tune... previously having a ba motor is was lean on fuel as expected even with the stock cam difference.

Rolling on at 160kw and lean enough i couldnt complete a full run, now rolling off at 187rwkw ready for mildura this weekend.

11/05/2026

A few people had questioned the miss down low (which was lack of o2 sensor and me not remembering a setting), so what better way to combat it than a set of kelford b and some valve springs. Rolling off previous with 141rwkw, stock engine, 4.3 diff. Rolling off this time ready for mildura this weekend with 190rwkw, 4.1 diff and the kelford cams. Graph in the comments 🔥

30/04/2026

Noahs manual fg turbo ute in for a few go fast bits, we have fitted and modded:

-50mm turbosmart wastegate onto the 3576 housing.
-Dominator Motorsports Australia pump gears, backing plate, valve springs, head studs
-Full engine reseal.
-bosch 1000cc injectors
-3.5 inch dump pipe.

The limit becoming the tiny intercooler making intake temp and restriction a big issue above 11psi of boost, requiring an extra 3psi to make 6rwkw isnt worth leaving it unsafe.

Reeling off 286rwkw on 11psi, coming in with 190rwkw stock.

Address

66 Old Princes Highway
Murray Bridge, SA

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm
Saturday 9am - 2pm

Telephone

+61448407284

Website

Alerts

Be the first to know and let us send you an email when Pedal This Performance and Conversions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category