COME Racing

COME Racing C-O-M-E....Racing
Builders and manufacturers of Street, Strip and Racing engines and parts for over

Order one of our Holden EFI Twin Throttle Body intake manifolds... https://comeracing.com/catalog/component/come-twin-th...
03/09/2026

Order one of our Holden EFI Twin Throttle Body intake manifolds...

https://comeracing.com/catalog/component/come-twin-throttle-body-holden-v8-manifolds

and any of our 355, 383 or 396 nodular cast iron 8 counterweight Holden V8 Stroker cranks...

https://comeracing.com/catalog/component/355ci-holden-stroker-crankshaft-nodular-cast-iron-special

https://comeracing.com/catalog/component/383ci-holden-stroker-crankshaft-nodular-cast-iron-special

and pay a Total of $4790.00 for both when purchased at one time.

This offer is valid till the 1st October 2026

To place order send an email to...

[email protected]

Please include your delivery address and phone number. Local pick up in Melbourne is available.

This represents over $400.00 in savings. If you are planning a build of your Holden V8 and need these components, this is the time to order.

30/08/2026

As we move closer to the sellout of all our Holden Stroker cranks, V6 Holden Billet steel Stroker cranks and LS Chev Stroker cranks we have special volume deals for engine builders and parts store customers. Purchases of 5 or more at one time, cast iron stroker cranks in either 355 (3.484" stroke), 383 (3.750" stroke) or 396 (3.8750" stroke). You can mix and match strokes...all the same price each. Send us an email to [email protected] for pricing details and any other questions you may have.

23/08/2026

LATEST STOCK information...We still have plenty of 383 cast cranks (Holden V8) for $1200.00 including freight.

We still have plenty of 355 cast cranks for $1200.00 including freight.

We still have three 355 Billet Steel cranks for $2700.00 including freight.

Finally, we have plenty of 396 Holden V8 cast cranks (3.8750" stroke) for $1200.00 each including freight.

We also have a small number or 396 Holden V8 Billet Steel cranks for $3300.00 delivered.

The last few 308 (3.062" Stroke) Holden V8 Billet Steel cranks are still available for $2660.00 delivered to most locations in Australia. These are the same 8 counterweight design as all our other cranks and also have Chev Small Block 2.1" rod journals.

Our last Holden/Buick V6 Stroker cranks with 3.700" Strokes are still available for $2800.00 delivered to most locations in Australia. They will fit VN Series II engines, VP and VR Engines as well as Ecotec V6 engines.

Full descriptions of all these parts are still on this site.

We still have a number of our LS 6.125" billet plate H beam rods with 8740 7/16" bolts in fully balanced sets for $1200.00 a set delivered.

Email if you wish to order...[email protected]

12/08/2026

LATEST STOCK information 12-08-26...We still have plenty of 383 cast cranks (Holden V8) for $1200.00 including freight.

We still have plenty of 355 cast cranks for $1200.00 including freight.

We still have some 355 Billet Steel cranks for $2700.00 including freight.

Finally, we have plenty of 396 Holden V8 cast cranks (3.8750" stroke) for $1200.00 each including freight.

We also have a small number or 396 Holden V8 Billet Steel cranks for $3300.00 delivered.

The last few 308 (3.062" Stroke) Holden V8 Billet Steel cranks are still available for $2660.00 delivered to most locations in Australia. These are the same 8 counterweight design as all our other cranks and also have Chev Small Block 2.1" rod journals.

Our last Holden/Buick V6 Stroker cranks with 3.700" Strokes are still available for $2800.00 delivered to most locations in Australia. The will fit VN Series II engines, VP and VR Engines as well as Ecotec V6 engines.

Full descriptions of all these parts are still on this site.

We still have ONE only LS 416 Premium Stroker kit (unbalanced) with custom JE BOOST pistons and our billet H beam rods to suit 6.2L engines. Has 58 tooth late type reluctor wheel fitted to crank...$4200.00 delivered

We still have a number of our LS 6.125" billet plate H beam rods with 8740 7/16" bolts in fully balanced sets for $1200.00 a set delivered.

Email if you wish to order...[email protected]

You can also order directly from the comeracing.com web site.

08/08/2026

LATEST STOCK information...We still have plenty of 383 cast cranks (Holden V8) for $1100.00 including freight.

We still have plenty of 355 cast cranks for $1100.00 plus freight.

We still have some 355 Billet Steel cranks for $2700.00 including freight.

Finally, we have plenty of 396 Holden V8 cast cranks (3.8750" stroke) for $1100.00 each including freight.

We also have a small number or 396 Holden V8 Billet Steel cranks for $3300.00 delivered.

The last few 308 (3.062" Stroke) Holden V8 Billet Steel cranks are still available for $2660.00 delivered to most locations in Australia. These are the same 8 counterweight design as all our other cranks and also have Chev Small Block 2.1" rod journals.

Our last Holden/Buick V6 Stroker cranks with 3.700" Strokes are still available for $2800.00 delivered to most locations in Australia. The will fit VN Series II engines, VP and VR Engines as well as Ecotec V6 engines.

Full descriptions of all these parts are still on this site.

We still have ONE only LS 416 Premium Stroker kit (unbalanced) with CP flat top NA pistons, rings, rod and main bearings, our 6.125" billet plate H beam rods to suit 6.2L engines. Has 58 tooth reluctor wheel fitted to crank...$4200.00 delivered.

We still have ONE only LS 416 Premium Stroker kit (unbalanced) with custom JE BOOST pistons and our billet H beam rods to suit 6.2L engines. Has 58 tooth late type reluctor wheel fitted to crank...$4200.00 delivered

We still have a number of our LS 6.125" billet plate H beam rods with 8740 7/16" bolts in fully balanced sets for $1200.00 a set delivered.

Email if you wish to order...[email protected]

06/08/2026

LATEST STOCK information...We still have plenty of 383 cast cranks (Holden V8) for $1100.00 including freight.

We still have plenty of 355 cast cranks for $1100.00 plus freight.

We still have some 355 Billet Steel cranks for $2700.00 including freight.

We still have five 355 Holden V8 Premium Stroker kits with our H beam Steel billet plate Stroker designed rods and Wiseco forged pistons with -15cc dish, file back rings, rod and main bearings...$30000.00 including freight.

Note! All kits are unbalanced.

Finally, we have plenty of 396 Holden V8 cast cranks (3.8750" stroke) for $1100.00 each including freight.

We also have a small number or 396 Holden V8 Billet Steel cranks for $3300.00 delivered.

The last few 308 (3.062" Stroke) Holden V8 Billet Steel cranks are still available for $2660.00 delivered to most locations in Australia. These are the same 8 counterweight design as all our other cranks and also have Chev Small Block 2.1" rod journals.

Our last Holden/Buick V6 Stroker cranks with 3.700" Strokes are still available for $2800.00 delivered to most locations in Australia. The will fit VN Series II engines, VP and VR Engines as well as Ecotec V6 engines.

Full descriptions of all these parts are still on this site.

We still have ONE only LS 408 Premium Stroker kit (unbalanced) with CP flat top NA pistons, rings, rod and main bearings, our 6.125" billet plate con rods. The crank has a late type 58 tooth reluctor wheel fitted...$4200.00 delivered

We still have ONE only LS 416 Premium Stroker kit (unbalanced) with custom JE BOOST pistons and our billet H beam rods to suit 6.2L engines.

We still have a number of our LS 6.125" billet plate H beam rods with 8740 7/16" bolts in fully balanced sets for $1200.00 a set delivered.

Email if you wish to order...[email protected]

29/07/2026

All our 383 Holden Premium Stroker kits with -15cc dished Wiseco pistons have been sold.

We still have the following 383 kits available on a first in with an email gets them. YOU MUST SEND US AN EMAIL before making payments to confirm these are still available. Enquiries will be processed chronologically so first in can buy the kit.
Email to [email protected]

Two ONLY 383 Super kits with billet steel crank, our H beam Steel billet plate Stroker designed rods and Wiseco forged flat top pistons with -7cc valve relief, rod and main bearings, file back moly rings...$4750.00 plus freight.

Two ONLY 383 Super kits with billet steel crank, our H beam Steel billet plate Stroker designed rods and Wiseco forged small dish pistons -10cc dish top or a -15cc dish top piston, rod and main bearings, file back moly rings...$4750.00 plus freight.

We still have plenty of 383 cast cranks (Holden V8) for $1000.00 plus freight.

We still have plenty of 355 cast cranks for $1000.00 plus freight.

We still have some 355 and 383 Billet Steel cranks for $2600.00 plus freight.

We still have 355 Holden V8 Premium Stroker kits with our H beam Steel billet plate Stroker designed rods and Wiseco forged pistons with -15cc dish, file back rings, rod and main bearings...$2800.00 plus freight. We have about 10 kits like this.

We still have 355 Holden V8 Premium Stroker kits with our H beam Steel billet plate Stroker designed rods and Wiseco forged pistons with -10cc dish, file back rings, rod and main bearings...$2800.00 plus freight. We have 2 kits like this.

Note! All kits are unbalanced.

Finally, we have plenty of 396 Holden V8 cast cranks (3.8750" stroke) for $1100.00 each plus freight.

We also have a small number or 396 Holden V8 Billet Steel cranks for $3300.00 delivered.

The last few 308 (3.062" Stroke) Holden V8 Billet Steel cranks are still available for $2660.00 delivered to most locations in Australia. These are the same 8 counterweight design as all our other cranks and also have Chev Small Block 2.1" rod journals.

Our last Holden/Buick V6 Stroker cranks with 3.700" Strokes are still available for $2800.00 delivered to most locations in Australia. The will fit VN Series II engines, VP and VR Engines as well as Ecotec V6 engines.

Go to comeracing.com for full descriptions of all these parts.

22/07/2026

We have twenty 383 Premium Stroker Kits available until sold out. These include our 383 nodular cast iron, 8 counterweight crank, our billet steel plate Stroker design H Beam rods and Wiseco Forged -15cc dished pistons, file back moly rings, con rod and main bearings. The kit is unbalanced but our rods come as fully balanced sets and balancing is a very easy process for any machine shop. The -15cc pistons will produce anywhere between 10:1 compression ratio and 10.5:1 depending on your combustion chamber volume. Pistons only available in +.030" bore size. Perfect for brute torque street applications...Offered only till sold out these kits are $2800.00 Freight cost is additional and dependent on your location.

Email us with your location for a freight quote to [email protected]

If you want to build your own combination we are also offering our 383 nodular cast iron cranks for $900.00 plus freight. Email for freight quote to your location. You'll never see these prices again.

Order ONLY by email including your name, full delivery address and phone number. Make payments via Direct Bank Deposit to our bank, details below...

Our Bank details are as follows...

Bendigo Bank

BSB # 633 000

Account # 163 369 226

Account Name...
Faru P/L trading as COME Racing

Please put your name or the business name in the payment reference
so we know the payment you make is yours.



NOTE: We have had incredible response to our sale of bottom end components. Thank you to everyone who has taken advantage of the bargains on offer. We apologise for not allowing phone calls, we simply did not have time to personally connect after receiving 100's of emails in the first few days of the sale. We processed all orders as quickly as possible because we were not tied up on the phone. Feel free to ask tech questions about our products by email, it's just much easier for us to answer you in that way.

22/07/2026

Please note : There is only one way to contact COME Racing which is via our email [email protected]
Due to availability of personal, workshop loading’s and the large amount of e-mail’s that can be received at any one point – emails can at times take a while to be sorted out into their relevant groups/people and then be responded to.
We thank you for your understanding and patience.

01/07/2026

COME Racing is NOT CLOSING DOWN.

We are retiring our crank and rod business and this means you have an opportunity to buy the best Holden V8 cranks and rods, Stroker kits at BARGAIN prices till stocks are all sold.

We don't answer the phone so please send enquiries to [email protected] Include your phone number so we can call you back if you have specific questions. Local pick up of all parts is available to Melbourne customers and Australia wide freight will always be offered.

For those of you who know what cranks, rods or stroker kits you want, email us and we will quote you prices and freight cost if you specify your location.

This change to our business does NOT MEAN WE ARE CLOSING DOWN. COME Racing will continue with all our alloy parts including our intake manifolds, cylinder heads, valve covers and more. Our Holden V8 replacement CAST IRON BLOCK will finally be offered for sale later this year.

We are scaling down and concentrating our efforts away from the rotating assemblies and parts. It's your opportunity to save big dollars. Take advantage of this while we have stocks available.

Address

7/143 Keys Road
Moorabbin, VIC
3189

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm

Telephone

+61395557308

Website

Alerts

Be the first to know and let us send you an email when COME Racing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to COME Racing:

Shortcuts

Featured

Share

Category