Auto Trim

Auto Trim Be it a Rod , a Resto , a Custom or a Classic weve got your interior covered

Front seat bottom covers marked out , cut out , foamed up and sewn up tonight , ready to move onto the front seat backre...
29/05/2026

Front seat bottom covers marked out , cut out , foamed up and sewn up tonight , ready to move onto the front seat backrests and the back boards

E55 style seat trim for an E38 big tank charger , black roebuck with white inserts using my factory covers as patterns t...
28/05/2026

E55 style seat trim for an E38 big tank charger , black roebuck with white inserts using my factory covers as patterns to get the seats exactly as the factory did them.
Going in a very nice E38 with a parchment interior that’s pretty much spot on but the owner wants black and white, I did the same with my hemi orange VH Pacer going from parchment to black , after all muscle cars just look so right with black interiors .
More to come as I start getting through this one and it’s a full retrim so not a small job but one I’ll enjoy doing

A pair of commodore front seats in light cerulean vinyl and fabric , the customer sourced the fabric online and I suppli...
21/05/2026

A pair of commodore front seats in light cerulean vinyl and fabric , the customer sourced the fabric online and I supplied the vinyls and labour , should look nice and fresh all back together

The bulk of the chargers rear seat base all cut ready to sew , still have to cut the piping and the listings along with ...
21/05/2026

The bulk of the chargers rear seat base all cut ready to sew , still have to cut the piping and the listings along with the rear most piece that fastens to the seat frame and then rinse and repeat for the backrest and two front seats

Recovering some RT charger seats to resemble E55 seats / black with white inserts and I’m using my original RT charger s...
21/05/2026

Recovering some RT charger seats to resemble E55 seats / black with white inserts and I’m using my original RT charger seat covers for patterns as I know the repop covers are not exactly the same as original, for one the original covers use two different sizes of piping not the one size just as an example and little things where other trimmers think they’re correcting stretched vinyl by straightening out the seam/pattern when in fact the factory made the covers with that deviation in the shape for a reason.anyway enough of that I know that Chrysler were very much on a budget compared to say Ford or GMH when it came to manufacturing and the seat covers were no exception and they used off cuts of everything from vinyl hardtop to Rooflining vinyl and obviously calico and hessian on the lesser models ( Rangers etc )
Here’s a prime example of something I’ve always said to some so called Chrysler experts that the Chrysler by Chrysler didn’t actually have a straight beige vinyl top where fitted from factory unless it was a dealer fitted option , the number of times I’ve been told I’m wrong is hilarious and here’s proof positive with this cover using the exact Chrysler by Chrysler parchment hardtop vinyl not the nylex aftermarket beige and these pics show the Chrysler parchment and the other pics show the beige sample sitting over it to demonstrate the stark difference when you actually have a comparison of the factory vinyl of course there were quite a few available vinyl hardtop colours around back then whereas today unless you are prepared to search for them your choices are fairly limited locally . The other pics show the off cut headlining used in the listings of the covers and also some of the factory markings on the back of the covers made during the manufacturing of the covers

The seats to the EH sedan
13/05/2026

The seats to the EH sedan

Making something simple a little more standout with a simple link stitch through the French seam for a bit more impact o...
12/05/2026

Making something simple a little more standout with a simple link stitch through the French seam for a bit more impact on this centre armrest for a landcruiser

A typical VW transporter seat repair , major foam repair and most of the cover on the base
12/05/2026

A typical VW transporter seat repair , major foam repair and most of the cover on the base

LC GTR style seats all done and ready for collection, unfortunately the rear seat base is a sedan ( 4 door seat ) and th...
07/05/2026

LC GTR style seats all done and ready for collection, unfortunately the rear seat base is a sedan ( 4 door seat ) and these are quite different in shape and actual size with the two door seat being taller and completely straight across the front which is very different to the sedans shorter rounded base , but after a bunch of pattern alterations I was able to get the base in a reasonable looking shape and finish to pass at a quick look for an original , rear boards made , padded ,covered and fitted to the front seat backs

The work so far on the transformation of standard LC Torana seats into LC GTR seats here’s what I’ve got done so far bef...
06/05/2026

The work so far on the transformation of standard LC Torana seats into LC GTR seats here’s what I’ve got done so far before leaving tonight as I said in an earlier post these will be finished tomorrow at some point throughout the day with only the bottom of the rear seat to sew up and fit

Address

13b Springfeild Avenue
Moonah, TAS
7009

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 2pm

Telephone

+61407758056

Website

Alerts

Be the first to know and let us send you an email when Auto Trim posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category