Hunter Automotive Solutions

05/10/2026

28/09/2026

🐭❄️ Unusual Find During a Service

During a recent service, a customer mentioned a noise coming from the air conditioning system. After inspecting the blower fan, we discovered the cause — a mouse bait that had made its way into the blower housing.

Foreign objects in the blower fan can cause noise, restricted airflow, and potential damage to the fan motor if left unchecked.

If you’re hearing unusual noises from your air conditioning or ventilation system, it’s always best to have it inspected early.

📍 1517 Elderslie Road, Mitchells Flat NSW
📲 0427 721 361
📩 [email protected]
🔎 www.hunterautomotivesolutions.com.au

23/09/2026

📈🔧 Looking Beyond Fault Codes

An oscilloscope allows us to see what many scan tools can't. It's one of the most powerful diagnostic tools we use to accurately diagnose faults without unnecessary parts replacement.

We use it to test:
✔️ Crank & cam correlation
✔️ Sensor signals
✔️ Injector operation
✔️ Wiring and electrical faults

📸 Check out one of our recent oscilloscope captures below!

📍 1517 Elderslie Road, Mitchells Flat NSW
📲 0427 721 361
📩 [email protected]
🔎 www.hunterautomotivesolutions.com.au

15/09/2026

💨🔧 Leaking Injector Washers – Don't Ignore the Signs

Leaking injector washers are a common issue on many diesel engines and, if left unchecked, can lead to carbon build-up, loss of performance, and costly repairs.

Common signs include:
⚠️ A chuffing or hissing noise from the engine
⚠️ Diesel fumes or a burning smell
⚠️ Black carbon build-up around the injectors
⚠️ Engine warning lights or poor performance

📸 The photo below shows leaking injector washers we recently found during a repair. Catching the problem early can help protect both your engine and your DPF system.

📍 1517 Elderslie Road, Mitchells Flat NSW
📲 0427 721 361
📩 [email protected]
🔎 www.hunterautomotivesolutions.com.au

09/09/2026

A timing belt replacement is a small investment compared to the cost of an engine replacement. If you're unsure when your timing belt is due, contact us today, and we can check your vehicle's timing belt interval. ⏰🔧 When Does Your Timing Belt Need Replacing?

📸 The photo below shows a timing belt that had been left too long. The belt stripped, causing severe engine damage that required a replacement engine.

📍 1517 Elderslie Road, Mitchells Flat NSW
📲 0427 721 361
📩 [email protected]
🔎 www.hunterautomotivesolutions.com.au

02/09/2026

🌬️❄️ Did You Know Your Heater Uses the Cabin Filter Too?

Your vehicle's heater and air conditioning both use the same cabin filter. A dirty or blocked cabin filter can reduce airflow, making both your heater and A/C work harder than they need to.

Replacing your cabin filter helps:
⚠️ Improve airflow
⚠️ Keep the air inside your vehicle cleaner
⚠️ Maintain the performance of your heating and air conditioning system

Ask us to check your cabin filter at your next service.

📍 1517 Elderslie Road, Mitchells Flat NSW
📲 0427 721 361
📩 [email protected]
🔎 www.hunterautomotivesolutions.com.au

25/08/2026

💨🚗 Your Air Filter Shouldn't Look Like This!

A deformed air filter may be caused by:
⚠️ A blocked intake
⚠️ Incorrect filter installation
⚠️ Excessive restriction in the intake system

📸 The photo below shows a deformed air filter we recently found during a routine service.

📍 1517 Elderslie Road, Mitchells Flat NSW
📲 0427 721 361
📩 [email protected]
🔎 www.hunterautomotivesolutions.com.au

20/08/2026

💧🔧 Don't Forget Your ProVent Catch Can Filter

If your vehicle is fitted with a ProVent catch can, the filter is a service item and should be replaced every 40,000 km, or as recommended by the manufacturer.

A blocked filter can reduce the effectiveness of the catch can, increase crankcase pressure, and affect engine performance. Replacing it at the correct interval helps keep your engine breathing properly and your catch can working as designed.

Not sure if your ProVent filter is due? Ask us to check it at your next service.

📍 1517 Elderslie Road, Mitchells Flat NSW
📲 0427 721 361
📩 [email protected]
🔎 www.hunterautomotivesolutions.com.au

11/08/2026

📚🔧 Investing in Training to Deliver the Best for Your Vehicle

At Hunter Automotive Solutions, we're committed to staying up to date with the latest technology through ongoing training.

Our recent training includes:
✔️ Pico Scope Diagnostics
✔️ Diesel Fuel & Intake Strategies
✔️ Diesel Diagnostic Process with Component Evaluation & Testing

Why? By investing in our team, we're helping save you time and money while delivering better outcomes for your vehicle. 💪

📍 1517 Elderslie Road, Mitchells Flat NSW
📲 0427 721 361
📩 [email protected]
🔎 www.hunterautomotivesolutions.com.au