Safe Performance

Safe Performance Here for all your barra/Miami/boss/haltech/link tuning needs.

We had lukes fg drift car on the rollers for a S.P E85 tune. With the Engine being unopened apart from valve springs, we...
12/07/2026

We had lukes fg drift car on the rollers for a S.P E85 tune.
With the Engine being unopened apart from valve springs, we got to work dialling in this absolute sled.

With a few random issues sorted out, we finished up with 356kw on 14.5 psi.

The engine mods consist of our tried and true set up.
Bosch 1150cc injectors
6boost style high mount manifold
Crow valve springs
Pulsar gtx3582 with external gate
044 style fuel pump and surge tank
3.5" turbo back exhaust
Tr6060 gearbox
M86 3.45 locker

We can't wait to see this thing destroying tires around calder park once the car is finished off with a roll cage and lock kit.

If you need your car tuned, be sure to get in touch as we tune a wide variety of platforms and ecus.


We received a message from a customer in the USA asking if we would be willing to remote road tune their factory barra e...
08/06/2026

We received a message from a customer in the USA asking if we would be willing to remote road tune their factory barra ecu set up in a gorgeous 69 torino GT.

Of course the answer was yes, so we got to work doing what we do best.
With no surprise the results have been epic.

The engine combo is the following;

A forged fg engine.
Factory fg na computer.
Bosch 1250cc injectors.
Pulsar gtx3584 on a tubular high mount Manifold.
Turbosmart 60mm gate.
400lph fuel pump
For boost control there was a trusty a boost T.
S.P custom 93/98oct calibration.

With the number 1 priority being reliability, we have a peak of 18psi and very soft ign timing. With the car being road tuned we don't have a definitive power number but it will be between 540-570hp.

It has been an absolute pleasure refining the tune on this extremely well put together beast
And this is all thanks to the owner Gabor.

The tuning process has been essentially faultless.

We will continue to refine the tune for Gabor and make sure everything continues to play nicely for many years to come.

We had Cades Tb48T GQ in this week for a retune after his last engine broke a ringland.The car has the following modific...
11/04/2026

We had Cades Tb48T GQ in this week for a retune after his last engine broke a ringland.

The car has the following modifications.

Haltech platinum tb48 plug in
Cast low mount manifold
3582 turbo (we believe)
4" dump to a 3" exhaust
4" snorkel/airbox
Bosch 980cc injectors
Tuned on 98 oct fuel

We dialled the tune in on wastegate pressure and then wicked the boost up to 10 psi.
The car made 227kw and we think it is suffering from an inlet/exhaust restriction or the turbo is smaller then we think as we had to strangle the boost controller to get there.

With the number 1 priority for this car being reliability and fuel economy, we were not concerned about the power figure.
The car is an absolute torque monster and makes 5 psi at 1500rpm so its perfect for what the car gets used for.

With the engine now no longer suffering from detonation it should live a very long and happy life, well as happy as it can be on limiter in a bog hole.


We had adams sled in for a touch up after he added factory boost control to his sexy wagon. We were very soft on the tun...
08/03/2026

We had adams sled in for a touch up after he added factory boost control to his sexy wagon.

We were very soft on the tune up as this car is still on P98 and only has a 3" exhaust.

When Adam gets time he intends on making a full 4" system along with some other modifications, maybe a G40 is on the cards 🤔

After we ran it through all the low load sections of the maps to check all the trims are still perfect, we got to work dialling in some more boost.

We are very happy with the result from such a small 2 PSI increase we have picked up 50kw.

Adam is now back on the streets, rowing gears and breaking hearts with a healthy power increase.

We will convince him to put a man sized turbo and e85 on this car very soon stay tuned.

We had Browny and Ash come down from bendigo to have custom engine and zf calibrations carried out on there immaculate F...
08/03/2026

We had Browny and Ash come down from bendigo to have custom engine and zf calibrations carried out on there immaculate FG falcons

Both cars came in with the following
modifications,

• Head studs
• Valve springs
• Oil pump gears
• Antz race intercooler kits
• Full exhaust
• Battery relocation kit
• PSR GTX3584rs gen III
• PSR external gate rear housing
• Gfb external wastegates
• Bosch 1150cc injectors
• Walbro 460 fuel pump
• S.P E85 engine and zf calibration.

After loading base files into both cars and giving Brownys ute a quick zap on the dyno,
We had a boost control issue.

We started with rerouting some wastegate solenoid lines but the issue was still very much a problem.

For interest sake we backed Ashs F6 on the dyno and it had the exact same issue.

So after making an educated guess, we made the call to Josh at ProHose and had 2x Turbosmart 45mm wastegates delivevered.

After fitting both wastegates we put the ute back on the dyno and like magic, we had perfect boost control like we always get from the PSR rear housings.

After comparing the two wastegates (GFB vs Turbosmart) we found the GFB has roughly half the poppet travel as the turbosmart unit.
Along with that the area above the poppet valve is also much smaller on the GFB unit causing boost to climb uncontrollably on these setups.

We finished up with the ute making 402kw on 17 psi and the F6 making 411kw on 16 psi.

Both cars are out of fuel pump and will be returning with surge tanks fitted and may be getting turned up a little bit once the boys get bored of 400kw.

We are absolutely wrapped with how both cars turned out and i can tell you, after the test drives the boys couldn't wipe the smile off their faces.

It was an absolute pleasure to tune these absolutely immaculate falcons.
We havent had engines this happy for quite some time, and they should both easily make 480-500kw with some more fuel pump.


We had Zacks very tidy gu coil cab patrol in this week for a custom 98 octane calibration.After battling some vct issues...
30/11/2025

We had Zacks very tidy gu coil cab patrol in this week for a custom 98 octane calibration.

After battling some vct issues and then having a set of coil packs leave the chat,
we soldiered on and ended up with a fantastic result.

Power was held back a little bit by the china intercoolers lack of cooling ability.

We kept the boost at a gentle 15 psi and dialled the timing in using knock detection equipment as we do on any car running 98 fuel.

The mod list is pretty simple yet gave us some great result.

Fg turbo engine
Head studs
Valve springs
Oil pump gears
PSR 3584 IWG
3" exhaust
Fenix intercooler
S.P custom calibration

We are wrapped with the results and look forward to seeing Zack use the car for the touring/towing and offroading it was built for.
(Try and keep this one the right way up mate)


We had Josephs au turbo sohc street/drift car in this week's for some S.P magic.Sporting a ba ecu we got to work diallin...
16/11/2025

We had Josephs au turbo sohc street/drift car in this week's for some S.P magic.
Sporting a ba ecu we got to work dialling in the setup.
After sorting out some ignition misfire issues with some replacement coil packs, we also fitted some colder range spark plugs with a tighter gap.

With the aim of the game being reliability on 98 octane, we were very conservative with the tune up,
With a peak of 8.5 psi we managed a best of 183kw and 540nm.

The log style exhaust manifold seems to be strangling power in the top end along with the stock camshaft.
we did try turning the boost up slightly and gained nothing past 4000 rpm so it was turned back down to 8.5 psi.

The car drives great and should cover all bases on and off the street.


💪

This week we had Liam's immaculate NIZPRO built bf f6 in for a health check after being tuned elsewhere. The car came in...
16/11/2025

This week we had Liam's immaculate NIZPRO built bf f6 in for a health check after being tuned elsewhere.
The car came in with the factory boost control disconnected and a boost T in its place,
Cruise control not working and the car being super lazy to drive.

We got to work throwing the boost T in the rubbish bin and refitting the factory Solenoid, flashed the car back to stock.
After a complete S.P retune the car now rips how it should with cruise control working how it should.
We found the limit of the wastegate spring as you can see on the dyno chart.
Boost peaks at 25 and falls off to 23 up top.

The car has the following items fitted to it,

Nizpro built engine
T56 with extreme twin plate clutch
Nizpro 4" exhaust
T51R turbo charger
Twin 044 surge
ID1700cc injectors
Nizpro plenum
Nizpro intercooler and piping
S.P custom E85 calibration
If it was in the nizpro catalogue, this car has it.

We will be organising a few more wastegate springs for Liam next week which will be followed by a retune.
Hopefully we can crack 550-600kw.

There's not many of these cars left in this condition, we are greatful to be given the task of tuning this absolute glamour.

Address

Hallam
Melbourne, VIC
3803

Website

Alerts

Be the first to know and let us send you an email when Safe Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share