What are the opening hours?

Monday 8am - 5pm Tuesday 8am - 5pm Wednesday 8am - 5pm Thursday 8am - 5pm Friday 8am - 5pm

Rotomotion

Call Directions Website Contact the business

Home to Perths only 6 Second Rota
http://www.rotomotion.com.au/

21/09/2026

🏁 THANK YOU! 🏁

A big thank you to everyone who popped down to the Celebration of Motorsport yesterday, stopped by Todd’s RX7 and took the time to say g’day and have a chat.

It was great catching up with so many familiar faces, meeting a few new ones and just enjoying a relaxed day surrounded by some seriously cool cars.

A massive thanks to Perth Motorplex, Tarmac Events WA and everyone involved in putting the day together. Events like this are a great way to bring the different sides of the motorsport and car community together.

Thanks again to everyone who came over and showed their support — it’s always appreciated! ❤️

See you at the track soon! 🏁

18/09/2026

🏁 CELEBRATION OF MOTORSPORT – THIS SUNDAY! 🏁

Todd will have his RX7 on display at the Celebration of Motorsport at Langley Park, so if you're looking for something to do, come down, check out some awesome cars and say g’day! 👋

There’ll be plenty to see throughout the day, and it’s always good to get the car out and catch up with fellow motorsport enthusiasts away from the racetrack.

📍 Langley Park – Rivers Edge
📅 Sunday, 20 September 2026
⏰ 10:00am – 3:00pm
🎟️ Free entry for spectators

Come down, have a look over Todd's RX7, have a chat with the crew and enjoy a great day of motorsport. 🏎️💨

See you there! 🏁

05/06/2026

Parting out Sr2 Rx7.
Ring the office with inquiries

22/05/2026

Dave’s R100 has been back in the workshop for some winter rear-end upgrades, with one clear goal in mind… improving the 60-foot times and making the car more consistent off the line.

To help achieve that, the boys have fitted a set of custom Penske 8300 double adjustable rear shocks, built specifically for the R100 chassis setup. While the rear end was apart, the old anti-roll bar setup was removed and replaced with a CJ Racecars “Big Johnson” anti-roll bar kit.

As anyone who has worked on an R100 knows, space is extremely limited, so Todd had to get creative to make the new ARB work effectively while still allowing room for future upgrades and servicing access.

With the rear end removed, Todd went about removing the old chassis support bars before fabricating and fitting a new rear cross brace setup. The chassis bars were then repositioned to allow fitment of a Tim McAmis rear driveshaft enclosure for added safety.

While everything was apart, Todd also fabricated a custom transmission belly pan designed to help prevent transmission fluid from making its way onto the rear tyres in the event of a component failure.

To finish off the rear-end upgrades, Mick wired in Dave’s rear shock sensors to complete the package.

We’re looking forward to seeing what improvements these changes bring once the track reopens following the new surface upgrade.

Stay tuned for more updates next season 👌

27/04/2026

A little bit of stainless art on this miserable Monday for this beautiful FC RX7 😮‍🔥

Todd has absolutely killed it with this master piece!!

Full custom 3.5” stainless steel exhaust system, front to back — built with one goal in mind… flow and symmetry.

From the merge right through to the twin exits, everything is laid out to keep it balanced and efficient. The Y merge is spot on, transitions are smooth, and every section has been carefully pie-cut to keep exhaust velocity up and restriction down.

3.5” front to back, V-bands throughout for serviceability, O2 provision sorted, and a climb back setup to keep everything tucked up tight and flowing clean under the car.

And the welds… say no more 🤌 Clean, consistent, and exactly how they should be on a system like this.

Tucked up perfectly, clears everything, and finishes off with twin tips sitting just right out the rear.

Form 🤝 Function

If you chasing a custom exhaust for your pride and joy, give the shop a call on 9452 1500 and let Todd build you something special 😎

31/03/2026

We’ve been a little quiet on socials lately… but that’s only because the workload behind the scenes has been anything but quiet 🥵

This freshly completed FC V-mount cooler setup, all custom fabricated in-house, now back from powder coaters and looking absolutely 👌

Clean, functional, and let’s be honest… downright delicious 🤤

This setup not only looks the part but is built to perform, keeping temps under control while maximising airflow efficiency—exactly how we like it.

12/03/2026

A bit of an update on Carmelo’s immaculate RX3.

Recently he upgraded his Injectors to a set of FuelTechs, along with having a new exhaust manifold fabricated before heading down to his local hub dyno in Melbourne so we could do a remote tune.

While we were going through the process we noticed the engine had a miss and called it a day.

Carmelo had the car sent over to Goran at GZM to investigate. It turns out the trigger wheel was damaged, so Goran went ahead and designed and manufactured a custom trigger wheel for the setup.

With the new trigger wheel installed, along with a new sensor and wiring from Racemode, it was time to jump back on the dyno for another remote session.

On the same dyno, at 29.3 psi, the combo laid down a stout 751hp through the GZM Jatco.

No doubt this will keep Carmelo's hands full on the streets of Mexico.

Thanks for trusting us with your pride and joy Carmelo. Enjoy that extra under your right foot 👊

22/02/2026

On behalf of Rotomotion and Vince’s family, we just want to say a huge thank you to each and every one of you who attended Vince’s Memorial Cruise today.

Seeing so many rotaries, bikes, and familiar faces come together meant more than words can say. The weather turned it on for us, and the atmosphere was exactly what Vince would have loved — good people, good machines, and great conversations.

To everyone who stayed on for a drink, a chat, and a proper catch-up, we truly appreciate you taking the time to be part of it.

Thank you for helping us celebrate a true gentleman of WA’s rotary community. ❤️

11/02/2026

Shoutout to Dan Johnston for surprising Todd and I this week with these awesome photos of the Rotomotion drag cars currently competing at Perth Motorplex.

They’ve definitely added some colour to our office waiting area!

Cheers Dan — we really appreciate it mate 🙌

09/02/2026

Join us in honouring Vince’s life with a relaxed Sunday coastal cruise and a chance to share stories, memories, and good company.

We’ll meet at the City West Licensing car park at 10:00am, with departure at 10:30am sharp. From there, we’ll cruise north along the coast toward the northern suburbs, with a few short regroup stops along the way to keep everyone together.

Our final stop will be at Whitfords Brewing Company, where anyone who wishes can stay on for lunch and a b**r or two as we celebrate a true gentleman of WA’s rotary community.

This cruise is open to all cars — rotary and non-rotary alike. We simply ask that everyone drives responsibly and respectfully: follow the road rules, and please no dangerous driving or burnouts.

Let’s make it a great day in Vince’s memory.

Address

517b Bickley Road
Maddington, WA
6109

Opening Hours

Monday	8am - 5pm
Tuesday	8am - 5pm
Wednesday	8am - 5pm
Thursday	8am - 5pm
Friday	8am - 5pm

Telephone

+61894521500

Website

http://www.rotomotion.com.au/

Alerts

Be the first to know and let us send you an email when Rotomotion posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Rotomotion:

Want your business to be the top-listed autos & automotive service in Maddington?