Barra Tas

Barra Tas Tassies go to Performance tuner! Masters of the Ford Barra. PCMtec, HP tuners, Haltech, Motec, link.

Recent Multi tune we completed on this Fg xr6 Turbo, with Zf auto on Bp98 fuel. Making 425kw on high boost and 363kw low...
16/08/2024

Recent Multi tune we completed on this Fg xr6 Turbo, with Zf auto on Bp98 fuel.
Making 425kw on high boost and 363kw low boost mode. With valet and ghost cams set as the other selectable tune options + anti-lag at the press of a button! πŸ”₯πŸ”₯

PCMTEC doing its thing, utilizing the factory ecu to have all these options! and with the ability to tune the auto transmision to handle all that new power!!

We supplied and fitted many parts including Pulsar Turbo Australia 3582, Full xforce exhaust system, Walbro fuel pump, 1000cc injectors, crow valve springs etc.

Video in comments showing the functionality!

The Barra ECU, now coming from all over Australia and even International! Whether its a basic tune to get your project c...
24/11/2022

The Barra ECU, now coming from all over Australia and even International!

Whether its a basic tune to get your project car running or a Remote Tune where we can custom tune your car over the internet when it's on the dyno. How good is technology!

Happy to help with anything tune related, just send through a message.

One of the best examples to grace our Dyno. See the last picture for how many km's! 🀯Running a Haltech 2500 Ecu for engi...
22/11/2022

One of the best examples to grace our Dyno. See the last picture for how many km's! 🀯

Running a Haltech 2500 Ecu for engine control and PCMTEC software to tune the ZF 6speed auto, this car has all the parts from a catalogue, while still maintaining a stock look.

Flex Fuel combined with a Rotary Trim K**b for tune selection, gives the driver power levels from 320kw all the way to 485kw at the wheels!

Should be enoughπŸ’ͺ

We have had many enquiries about tuning the new 3.0L V6 twin turbo EcoBoost Ranger Raptor - thankyou for the support! Th...
20/11/2022

We have had many enquiries about tuning the new 3.0L V6 twin turbo EcoBoost Ranger Raptor - thankyou for the support!

These are the latest challenge for the tuning scene, and to date, they are untunable..☹️ with no available software able to modify the ecm or tcm. ( engine/transmission control module )

We have worked with leading brands and workshops, reaching all the way to Europe in hope to offer somthing, but Ford has made this one difficult..
The day somthing is available, be sure we will have one on the dyno! πŸ“ˆ

for now we will stick with the 3.5litre EcoBoost found in the F Truck range - Stay tuned!

One clean Mustang on the dyno! 🐎In stock form, making 265kw at the hubs.Next is an exhaust and intake upgrade to remove ...
05/10/2022

One clean Mustang on the dyno! 🐎

In stock form, making 265kw at the hubs.
Next is an exhaust and intake upgrade to remove some restrictions πŸ“ˆ

Custom tune on the engine βœ…οΈ
Tuned Automatic gearbox β˜‘οΈ
for best drivability and performance!
The customer is amazed at how we brought the car to life and loves the new driving characteristics!

We can tune many transmisions - 6r80, 10r80, Zf6 to name a few. Get in touch to see how we can bring your car to life πŸ”₯

Road trip for this one! N/A Barra with a Turbo to get it singing!Basic engine upgrades to run 13pound of boost and runni...
18/09/2022

Road trip for this one!

N/A Barra with a Turbo to get it singing!
Basic engine upgrades to run 13pound of boost and running on e85.
Plenty of power to get slippery and unfortunately need a new clutch. πŸ’¨πŸš€

This car has some sweet as fab work all completed by the owner, such as a low feed inlet manifold made from a 3.9L Eb falcon, all the boost and exhaust pipe work and the 4 point Roll cage! 🀘

Somthing a little different for Barra Tas... πŸ˜† We offer more than just turbo inline 6 goodness!  With a VCM Performance ...
14/09/2022

Somthing a little different for Barra Tas... πŸ˜†
We offer more than just turbo inline 6 goodness!
With a VCM Performance 883 cam, Proflow intake and an ethanol sensor on board from factory, once the run in period is complete it will get to the dyno!

We had the pleasure to tune this super clean Barra patrol! With a Haltech elite 2500 ecu, with extras including flex-fue...
11/09/2022

We had the pleasure to tune this super clean Barra patrol!

With a Haltech elite 2500 ecu, with extras including flex-fuel, wide band controller, IC7 dash and a rotary trim k**b to choose up to 12 different boost and power levels! 🀌
A few hours spent dialing this one in!

The barra power plant has a Pulsar Turbo Australia borgwarner 372 turbo and many other goodies such as a surge tank with twin staged fuel pumps!🀩

This will be well into the 400kw's on 85% ethanol. Getting close to the limit of the factory patrol Re4 auto. πŸ’¨πŸ’¨

The Dyno is back up and running! after waiting on international parts for toooo long.. Next up was this Bf Xr6 turbo ute...
11/09/2022

The Dyno is back up and running! after waiting on international parts for toooo long..

Next up was this Bf Xr6 turbo ute. Tuned using the best option for the factory ecu - PCMTEC
Punched out an impressive 424kw at the hubs on 98 octane.
Safe to say she's a good runner. πŸ”₯

1000cc injectors.
Intake 460 fuel pump.
Intercooler kit.
Battery relocation/turbo side intake
4inch exhaust.
Valve springs. &
A clutch to take the power!

Enjoy the Weekend! Get those Projects finished.✊
17/06/2022

Enjoy the Weekend! Get those Projects finished.✊

Had this absolute rig on the hubs. Well on its way to mid 300kw! until it had some trigger issues.. After a lot of diagn...
15/06/2022

Had this absolute rig on the hubs.
Well on its way to mid 300kw! until it had some trigger issues.. After a lot of diagnosing with the owner it was all addressed.
We also supplied a new Pulsar Turbo Australia Gen3 3584 ready for when it comes back.
Will be good to get it completed ready for some winter 4wd trips!

Not only Barra engines at Barra Tas ! 😜We had the opportunity to be involved with a Mustang Coyote swapped Ranger Raptor...
03/05/2022

Not only Barra engines at Barra Tas ! 😜
We had the opportunity to be involved with a Mustang Coyote swapped Ranger Raptor.
-Supercharged 5.0L v8, on its way to push into the 400rwkw.
-10 speed 10r80 auto transmission, getting a custom tune offering faster and stronger shift points and better drivability with all the new power!

We made good progress until having some boost issues, this car will be awesome once finnished!

Address

Launceston, TAS

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+61419233651

Website

Alerts

Be the first to know and let us send you an email when Barra Tas posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Barra Tas:

Share