N T H Mechanical

N T H Mechanical Mobile Heavy vehicle and equipment mechanical & hydraulic servicing, repair and breakdown assistance
(1)

Had a customer ring this morning about an annoying squeak and horrible handling this morning , a quick inspection found ...
08/03/2026

Had a customer ring this morning about an annoying squeak and horrible handling this morning , a quick inspection found both side upper control arm bolts loose and the left hand rear upper bush was half way out of the arm and the nut was only on by a couple of threads 😮 this vehicle had recently been serviced by a dealer under capped price servicing and was missed 🤦🏻 if something feels off in your vehicle or just doesn’t sound right get it checked by your mechanic asap or give us a call and we’ll be happy to have a look , this could have been so much worse

One of our customers has had some trouble lately with fan destruction on a Terex PT110 that does a lot of mulching work ...
08/03/2026

One of our customers has had some trouble lately with fan destruction on a Terex PT110 that does a lot of mulching work , the original design of the fan protection just wasn’t up to the task . Material that is too light for a start and pushes out of the mounting setup with the smallest stick that causes the grill mesh to contact the radiator and tear the blades apart ,
We reconfigured and repurposed the original fan protection with our own take on forestry guarding that will take the punishment and also allow for more room between the grill and the fan to when accidents do happen , we like a challenge and are pretty happy with how this job turned out for less than the price of a new fan , as is our customer

Lucky save earlier this year with a 4jj1 with a broken crank bolt and destroyed balancer , luckily the crankshaft wasn’t...
27/02/2026

Lucky save earlier this year with a 4jj1 with a broken crank bolt and destroyed balancer , luckily the crankshaft wasn’t damaged and a new key was able to be fitted with a new pulley 🤙🏻😂

18 speed auxiliary re raced after developing a nasty vibration from a failed output bearing
27/02/2026

18 speed auxiliary re raced after developing a nasty vibration from a failed output bearing

Control bank pilot control oil leaks repired recently whilst we try and source parts for an obsolete machine
27/02/2026

Control bank pilot control oil leaks repired recently whilst we try and source parts for an obsolete machine

Bit of maintenance on a local customers spray rig recently repairing oil leaks on the main valve block
27/02/2026

Bit of maintenance on a local customers spray rig recently repairing oil leaks on the main valve block

Kubota 2.5 bucket cylinder straightened and resealed recently
27/02/2026

Kubota 2.5 bucket cylinder straightened and resealed recently

Cat 247b in recently with the complaint of hydraulic functions at all , customer was worried that the pump may have fail...
27/02/2026

Cat 247b in recently with the complaint of hydraulic functions at all , customer was worried that the pump may have failed but where very relieved when we notified them that the drive coupling had stripped and the pump was still good

Bit of a panicked breakdown out to the bush for smoke pouring out from the wiring loom , internal failure in a trailer l...
27/02/2026

Bit of a panicked breakdown out to the bush for smoke pouring out from the wiring loom , internal failure in a trailer light module could have gotten a lot worse if not for the top notch operator 💪🏻

Rayco stump grinder in recently with broken mounts on the engine plate redrilled to suit wider pattern and back to work
27/02/2026

Rayco stump grinder in recently with broken mounts on the engine plate redrilled to suit wider pattern and back to work

Some days you have to get creative , failed diaphragm in a circuit protection valve brought this truck to a halt on the ...
27/02/2026

Some days you have to get creative , failed diaphragm in a circuit protection valve brought this truck to a halt on the side of a busy road at Kimberley this morning , new temporary diaphragm made and back to work until the new valve turns up

Address

Latrobe, TAS
7307

Opening Hours

Monday 6am - 5pm
Tuesday 6am - 5pm
Wednesday 6am - 5pm
Thursday 6am - 5pm
Friday 6am - 5pm
Saturday 6am - 5pm

Telephone

+61417181727

Website

Alerts

Be the first to know and let us send you an email when N T H Mechanical posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to N T H Mechanical:

Shortcuts

Share

Category