Custom Repro Parts

Custom Repro Parts Custom Repro Parts can design and manufacture rare or custom plastic parts for your car or project

Been another year since a postI don't advertise a lot of the smaller bits on Facebook as there is a lot of time wastersI...
19/11/2025

Been another year since a post
I don't advertise a lot of the smaller bits on Facebook as there is a lot of time wasters
I have had another sunny and 120y I used for parts.
I am now making:
1200 wagon boot rods (adjusting for 120y soon)
120y and 1200 dust covers
Centre console bezel
1200 under dash heater vent
120y radio button
1200 wagon tail light inner
1600 cup holders
Coming soon
Radio delete plate

See you in another year for a post haha

Has been a year again since a post have been making new parts and all available on ebay.Something new - Datsun 1200 Cuph...
30/09/2024

Has been a year again since a post have been making new parts and all available on ebay.
Something new - Datsun 1200 Cupholder
Clips straight on to the ash tray no screw in your dash just a clip on.
1x $40 free post
2x$60 free post
Check you have the correct ash tray

Its been awhile since posting but a little updateIve finished designing datsun 1200 bits:wagon tail light innersglove bo...
02/10/2023

Its been awhile since posting but a little update
Ive finished designing datsun 1200 bits:
wagon tail light inners
glove box doors
original hand brake handle
hand brake button
heaterbox hoses
120y centre console boots
Ive had abusy few months settling in at new house, job and with our little girl sophia being born 3 weeks ago so will hopefully be able to keep up production. I will be minimisimg taking on new designs for awhile as I will be focusing on family.
I will still be selling parts so make sure you keep an eye on my ebay page as I upload parts.

Finished off some smaller parts over last few weeks.Now available:Datsun 1200 and 120y window winder handle washers ($1...
03/01/2023

Finished off some smaller parts over last few weeks.
Now available:
Datsun 1200 and 120y window winder handle washers ($14.90, set of 4)
Datsun 1200 B110 Coupe Sill Panel Chrome End Caps ($29.90 set of 4)
Available after some fitting in the coming week is:
Datsun 1200 Heater box/vent hoses
($39.90, Pair)
Datsun 1200 centre console bezel ($29.90)

All have free postage in Aus

All available via personal message or you can purchase through:
https://www.ebay.com.au/usr/customreproparts

All parts are designed and made here in Gold Coast, Aus. I will strive to keep the Datsun parts market affordable and alive with your support. If there are any parts you think people will need that isn't already made in Aus send me a message.

My next project to finalise is 1200 glove box doors

Working on gloveboxes currently.3d printed in 2 seperate parts at the moment, but will be printed as one in the final pa...
17/12/2022

Working on gloveboxes currently.
3d printed in 2 seperate parts at the moment, but will be printed as one in the final part.
Sheet metal back and will install a hinge.
Then start on the locking mechanisms.
When in full production they will be $150

Chrome Retaining Clips for Rear 1/4 panel Chrome Fits Datsun 1200 B110 CoupeClips for the rear 1/4 panel chrome trim bel...
10/12/2022

Chrome Retaining Clips for Rear 1/4 panel Chrome Fits Datsun 1200 B110 Coupe
Clips for the rear 1/4 panel chrome trim below the rear push-out windows. 3 x push-in clips retain the bottom of the chrome strip. See photos. Selling in packs of six (3 x each side)

3d printed in PETG.

Message me if you're after any custom car parts to be designed and manufactured.

Check out my other items as I sell multiple parts for Datsuns and Holdens and can combine postage.

Available Here or message me:
https://www.ebay.com.au/itm/255753254730?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=0mbjzWQ5Tu2&sssrc=2524149&ssuid=0mbjzWQ5Tu2&widget_ver=artemis&media=COPY

Datsun 1200 ignition barrel adaptor for a 120y steering column cover. Allows the 120y column cover to be fitted to the 1...
19/11/2022

Datsun 1200 ignition barrel adaptor for a 120y steering column cover. Allows the 120y column cover to be fitted to the 1200 ignition barrel

does not include the column cover

3d printed in PETG.
Message me if your after any custom car parts to be designed and manufactured.
Check out my other items as I sell multiple parts for Datsuns and Holdens and can combine postage

$40 Free postage in Australia

Available Here:
https://www.ebay.com.au/itm/255466906742?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=0mbjzWQ5Tu2&sssrc=2349624&ssuid=0mbjzWQ5Tu2&var=&widget_ver=artemis&media=COPY

Datsun 1000 Ute KeychainAvailable in red, black, blue, green, pink and clearMessage me if your after any custom car part...
12/11/2022

Datsun 1000 Ute Keychain
Available in red, black, blue, green, pink and clear

Message me if your after any custom car parts to be designed and manufactured.

Check out my other items as I sell multiple parts for Datsuns and Holdens and can combine postage.

$14 free postage within Australia

Address

Jimboomba, QLD
4280

Telephone

+61411704569

Website

Alerts

Be the first to know and let us send you an email when Custom Repro Parts posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category