Teejays Rodshop

29/06/2026

Love it when the TIG is laying it down like melted butter. And it even on sh*tty gal….

03/05/2026

We re-fabricated & installed a battery bracket on our 1959 retractable to properly accommodate an upgraded battery system. The vehicle was previously fitted with an 5 yr old undersized 500 CCA battery, which proved insufficient for the electrical demands of the car—particularly the retractable roof mechanism.

This has now been replaced with a more suitable 880 CCA battery, ensuring a significantly higher reserve of starting power and consistent electrical performance.

For those familiar with these vehicles, it’s well understood that the retractable roof system is highly power-intensive, drawing approximately 45 amps during its full cycle of operation.

Given these demands, having adequate battery capacity is not just beneficial—it is essential. The upgraded battery, combined with the custom bracket for secure fitment, provides the reliability required for smooth and uninterrupted roof operation and overall functionality

25/08/2025

Our first ever attempt at professional advertising 1994.

When you look back at your life, it looks like a well planned road map

It certainly didn’t feel like it at the time, dealing with the setbacks, struggles, delays and detours. But ironically it was these moments that were individually shaping the amazing life we’re living today.

If life’s taught me anything- it’s just let go and trust the process, somehow it already has it all figured out…

16/02/2025

Sometimes Im presented with a job that although simple and straightforward, is incredibly overwhelming.

Jordan, even though your gone mate, your legacy lives on, demonstrating shining testament to the impact you had on the many lives of those all around you.

RIP mate.

Jordon Wahl Parkinson
5/9/98-25/9/24

18/01/2025

26/11/2024

Building extra beefy chassis brackets for a great mate on the rear support bar of a Jayco caravan. Engineered to go well and truly out back, these 10mm brackets will last a lifetime of use.

09/10/2024

Embrace the thrill of the journey, life is only a series of magnificent moments waiting to be enjoyed.

04/08/2024

After spending considerable time locating a fuel leak / flooding issue on an Autolite 4100 Ford carburettor, we discovered that the power valve seal which is provided in the “rebuild restoration kit” is a poorly manufactured/ incorrectly sized gasket.
For those familiar with the vintage carburettor. This leak is undetectable and occurs beneath the power valve location within the vacuum chamber itself which activates the pressure variance required to operate the power valve.
This leak is unable to be detected externally unless you remove the carburettor and remove the power valve cover exposing the leak.
Trust me when I say it had me completely stumped and chasing my tail trying to identify the problem.
The gasket as supplied in the kit is substantially thinner that the OEM gaskets and I only discovered this when discussing the issue with a specialist in carburettor restoration.
Blueing the file finishing the gasket face and cover also eliminated some warping ( being the body is aluminium) but once the correct gasket and power valve is installed then the problem vanishes.
Frustrating…… a definite yes but kudos to the carby shop at Yatala for pointing out the obvious and having the OEM parts which provided the solution.

20/05/2024

Restored to her former glory, this HJ75 Landcruiser is ready to continue serving her owner with a refreshed look and renewed reliability. Rust removed, panel’s straightened and fresh paint applied she’s prepare for another 30 years memorable journeys ahead! Thanks to Concept Paints for the amazing support and supplies to complete the repair, to All four spares for finding and supplying genuine OEM rubbers, Ipswich Paint Supplies and their crew for the last minute supplies and to the owner and customer of this outstanding ride. Hope you enjoy many more years of adventures.

07/04/2024

Final assembly of all the bits on the 75 series Landcruiser. Original split rims are now back in their original OEM Toyota grey, fit and finish of the panels is better than original. Glass and a few small bibs and bobs to finalise and she’ll be ready for another 20 years of faithful service.