Tuneboy Engine Management Systems

18/05/2018

https://www.youtube.com/watch?v=NcHRBU_I5vA

This shows the roll on auto tune mode of the TuneBoy software. The ECU has been flashed with the TuneBoy live tuning map. The big dip in power on the first r...

18/03/2018

https://www.youtube.com/watch?v=Jl8xggg2p1g

This video shows how to reflash the Yamaha MT07 through the diagnostic connector using the TuneBoy software This also shows the live tuning on the dyno

04/03/2018

https://www.youtube.com/watch?v=Po1eTLeV4Ek

TuneBoy down shift blip and cruise control on 2017 Yamaha MT09

04/03/2018

TuneBoy down shift blip added to the 2017 Yamaha MT09.
This replaces the lower part of the gear selector rod.
The up-shift is still done with the Yamaha shifter and the down shift with the small Cordona shifter.
This allows us to use a less expensive shifter version as it only needs to work in one direction.
We also have cruise control, launch control and other features.
Flashing of the ECU is done through the diagnostic connector, no need to alter the wiring loom or add any extra wires to the ECU connector

29/11/2017

Nice bit of pipe work.
Diavel with Moto Corse exhaust after dyno tuning and a Panigale with the new Akrapovic exhaust

28/11/2017

https://www.youtube.com/watch?v=q9VQJiy4Y-E

This shows you how to fit the nudge buttons to the handlebar

26/11/2017

https://www.youtube.com/watch?v=_zoDoGrh4ho

New TuneBoy Quickshifter on a Diavel GenII This is the new V6.8 map, this has a much better up and down shift action

19/03/2017

Here is a little video of the Cruise Control on the Yamaha MT09
The TuneBoy maps for the MT09 add Cruise Control and QuickShift support, the shifter does up and down shifting.
https://www.youtube.com/watch?v=OD0h7u5cRoY

TuneBoy Cruise Control on the Yamaha MT09 Cruise is activated by a long press on the mode button. A normal press of the mode button is used to switch modes l...

18/12/2016

Turbo Diavel tuned with the TuneBoy software.
https://www.youtube.com/watch?v=-_vSpzJBv0k
We made a special map for this bike, it replaces one of the MAP sensors with a 2-Bar map sensor, the 2-Bar sensor is connected to the turbo air box.
The other MAP sensor is disconnected from the throttle bodies so it acts as a barometric pressure sensor.
This allows the ECU to calculate the % increase in pressure inside the air box, the TuneBoy software has a table for boost fuel and one for boost ignition, this allows the ECU to handle the extra fuel required once boost comes on and the ignition re**rd to protect the engine from detonation.
Larger injectors are fitted to the bike, fuel pump and lines are all standard, clutch has a mod to allow it to handle the 240HP.

This complete turbo kit has been fabricated and dyno tuned in house by Pro Twin Australia. For more info, check out our blog at www.protwin.com.au

27/10/2016

https://youtu.be/iFhbZCSOB3c

This video shows the Ducati Panigale 959 on the dyno The TuneBoy software on the dyno computer is controlling the throttle on the motorcycle to automate the ...