ROYCE Auto Electrical and Air Conditioning

18/09/2025

18/09/2025

A huge shout out to our newest TRADIE!
Congratulations 🎉on completing 4 years of your apprenticeship SAM. 💪👏

Sam has been the dream apprentice! Being from the country, Sam came with a strong mechanical and auto electrical knowledge before signing on with us.

We're GRATEFUL you're part of OUR TEAM Sam!

29/05/2025

Royce + Sam teamed up to tidy up and iron out the many auto-electrical wrinkles in Peters 1959 Custom line Ford.

We're often asked how long a job will take. Even with 30 years in the trade Royce still finds it hard to know.

There are many variables at play, especially working with old vehicles.

We pride ourselves on quality workmanship. It takes as long as it takes.

If QUALITY COUNTS, then call us today.

PH 0419 349 076

28/05/2025

FULL TEAM EFFORT to get a lot done in short time frame for our country customers.
Keeping the boys busy wiring in another ATD bull bar, RUNVA winch with two UHF's.

QUALITY WORKMANSHIP done right the first time -

PH 0419 349 076

08/04/2025

Marc's 2005 WRX air con suddenly stopped working. 😭

Here we have another example that "IT'S RARELY JUST A REGAS".

Brodie discovered the AC system was low on gas.
After pressure testing, he found a leaking discharge line.
Our customer wasn't keen to pay factory price for a new line.
Brodie was able to get the fittings welded up and return to site and make up a new line. 💪
After testing the pressures, our customer was happy with his vent temp of 5 degrees.👏

Air con is complicated - it's RARELY JUST A REGAS.
Air con not working as well as it should.
Call 0419 349 076

04/04/2025

Christine was complaining that her vehicle AIR CON was NOT AS COLD AS IT USED TO BE also the AIRFLOW FROM THE VENTS was POOR.

If you're vehicle air conditioning isn't cold, it's RARELY JUST A REGAS. Our job is to diagnose the fault - consult with you the customer and move forward with the repair from there.

For diagnoses and repair notes 👇

AC not cold.
Compressor engaging, not cold in cabin.
Remove gas from system. (150g)
Visual inspection shows high side service port leaking.
Replace service port.
Leak test system, no leak present.
Vac system.
Recharge with r134a (500g).
Test ok, vent temp 5 deg.

Customer complaint of air flow out of vents.
Check cabin filter. Very dirty.
Supply and fit replacement cabin filter.

When QUALITY WORKMANSHIP counts.
Call us - 0419 349 076

12/02/2025

Total refurb on a Land spray tank.

TO DO LIST🪛🦹
Strip + remove all things auto electrical from old truck.
Refurbish, re-fit and rewire new Land spray tank.

For all the FUN FACTS read Royce's notes 👇.

Call to Site.
Strip electrical components from truck so body can be refurbished and fitted to new cab chassis. Remove IVMS unit to be refitted to new truck.
Remove Guardian while truck pulled apart.

Fit out refurbished body to new truck.👇
Call to site and removed dash panels from new truck to allow them to be laser cut to fit new switches.
Remove panel from head console for camera monitor and vac/pressure gauge to be fitted.

Install previously remove IVMS system.
Order parts list required to be ready for work.

Chase the new truck to Brisbane to allow electrical work to be performed while hydraulics were being fitted. Customer requested this to prevent holding up progress once the truck was back in Toowoomba.
Wire up ADR lighting to meet specs for roadworthiness.
Mount and wire supplied work/flood lights.
Supply and fit replacement junction boxes top and bottom of tank.
Supply and fit reverse camera system and allow for dog trailer camera in the future.
Supply and fit trailer plug base fed with optional functions for dog as have done in the past.
Strip and refurbish main control junction box.
Supply and fit air solenoid to the underside of passengers side seat to allow a switched air supply to the rear center valve. Run nylon air line front to rear for this purpose.
Run vacuum/pressure line from pump/discharge hose on the rear of truck to the head console.
Wire in PTO switch and warning light on dash.
Wire in relay to allow hydraulic cooler fans to engage as soon as the pto is engaged.
Mount and wire E-Stop to rear of pump.
Test operation of all circuit.
Returned to Toowoomba to hand over to customer.
Upon this hand over, extra E-Stop and hoist operation switches were requested.

We value QUALITY WORKMANSHIP done right the first time.
Call - 0419 349 076

25/01/2025

Happy AUSTRALIA DAY!

We'll be closed for trade Monday the 27th, 2025.

20/01/2025

Lucas's first complete IVMS install FLYING SOLO!🦹

After removing the dash in this brand new D - Max.

Lucas installed and wired in
- IVMS (In Vehicle Monitoring System)
- CAMERA
- SEAT VIBRATION + IRIDIUM

Lucas is another LEGEND in the making.

QUALITY WORKMANSHIP can't be rushed.
Ph 0419 349 076

07/01/2025

Our team LOOKING SHARP ready to take on 2025!

We're looking forward to another year SERVING our LOCAL COMMUNITY and COMMERCIAL customers alike.

Our work is diverse, our team experienced.

If you're after quality workmanship, give us a call - we come to you.

PH - 0419 349 076

21/11/2024

DUAL BATTERY SETUP Royce and Lucas recently completed on a 2023 Hilux dual cab.

Full job notes 👇

👉Dual battery set up utilizing 200aH Lithium battery (5yr guarantee) and bracketry to mount behind the rear seat.

👉Incorporate Redarc BCDC 1240 charger with solar input.

👉Incorporate Redarc Smart battery monitor with blue tooth connectivity to monitor battery state of charge via the red vision app.

👉Anderson plug to tub to power portable fridge.

👉NO supply of solar panel has been allowed for.

👉Removed existing anderson plug that was wired into small wiring at factory power socket in tub.

👉Run new heavy duty feed from aux battery to anderson plug in tub.

👉Wire in factory acc socket in tub to the output of aux battery via a separate fused feed.

👉Route solar wiring up rear fire wall to allow connection of solar panel and still allow the roller top of ute tub to operate.

We understand that all CUSTOMER NEEDS are UNIQUE, and every VEHICLE SETUP is DIFFERENT.

Feel free to give us a call to discuss your new vehicle setup requirements.

We value QUALITY WORKMANSHIP done right the first time.
Call - 0419 349 076