AVR Dyno Centre Griffith

AVR Dyno Centre Griffith Chassis and engine Dyno, tuning, Ecu remaps and engine building, rms certifying, emissions testin

At Advanced Vehicle Remapping and Dyno Centre Griffith we pride our selves in the work we do, our work is our passion, no job is to big or to small. Our workshop features a dyno dynamics dyno which is capable of handling 1250rwhp, our trained and dedicated staff have a passion for all performance and off road needs with two tuners on hand. We offer performance packages from
Mild-Wild whether it be

a basic tune up or a supercharger or turbo kit. We only use quality products from suppliers such as, VCM/Auto Technique, Mace Engineering, Orrsom performance, Xforce exhausts, Tunit chips, HPD Diesel, Excedy clutches and Quantum Tuning Products

We also offer general services and maintenance checks on all 4x4 and passenger car vehicle.

28/05/2026

We had Kim’s wb in to wick the nitrous up to a 200hp shot, unfortunately running out of fuel pump, it will be back for more!

27/05/2026

Finally had a bit of time this arvo to give the shop car a tune after upgrading the stock ls3 heads to a pair of detroitracingproducts 6 bolt cnc ported heads, some new 2200cc injectors to suit, we struggled with tyre slip, so we chucked two of the boys in the boot and pushed 903rwhp, I think it’s time for a hub Dyno!
dynodynamicsau
crowcams
CAPA Performance
North Vic Engines Cobram
Vortech Superchargers
briantooleyracing

Hey guys we have stock of Magic Joes detailing clothes in stock and on special for $45They work great!🔥ULTIMATE PAIR🔥 Th...
24/05/2026

Hey guys we have stock of Magic Joes detailing clothes in stock and on special for $45
They work great!

🔥ULTIMATE PAIR🔥
The Complete 2-Step Detailing System

Why buy one when you can get the full setup?

Comes with

1x Suck It Up (Ultra Thick Drying Microfibre)

1x Finish It Off (Premium Detailing Microfibre)

The Ultimate Pair gives you both essentials — high quality drying and finishing — in one bundle, so you get a better result for a better price. It’s a no brainer!

23/05/2026

894hp of naturally aspirated madness 🤯

We had Tony’s tough 400ci Ford with SC1 heads in for a full health check, inspection and tune-up. After a few solid days of measuring, inspecting, setting lash, checking spring pressures sorting the carbies and fixing up the plumbing, it was finally time to strap it down and let it eat.

Running on MS109, this combo laid down a massive:
🔥 894HP @ 8900RPM
🔥 576ft-lb @ 7300RPM

An absolute weapon of an N/A setup screaming to nearly 9000rpm 👌

Turn the volume up for this one 🎥🔊

Damir brought us his ve ss in for a new heart, we built a reco 6l put it on the pump and made 570hp, put the new motor i...
20/05/2026

Damir brought us his ve ss in for a new heart, we built a reco 6l put it on the pump and made 570hp, put the new motor in along with GM Motorsport ram jet extractors, xforceexhaust catback, exedy_aus clutch kit and it put down 322rwkw

A few of last weeks Custom diesel tunes done right 👌Whether it’s for towing, touring or getting the most out of your set...
17/05/2026

A few of last weeks Custom diesel tunes done right 👌

Whether it’s for towing, touring or getting the most out of your setup, we can fine tune your diesel to suit your needs. More power, better drivability and improved torque where you actually need it.

✔️ Custom tuning
✔️ Improved throttle response
✔️ Towing performance gains
✔️ DPF, EGR & intake solutions available
✔️ Suits work utes, tourers & performance builds

No generic files — every tune is tailored to the vehicle and setup.

Send us a message to book your diesel

08/05/2026

Brendan’s ls1 from Melbourne he sent in to us for a rebuild, factory style rebuild custom grind cam, cnc ported heads making 540hp and 460ftlb

79 cruiser in for a tune after having some gslfab goodies fitted
28/04/2026

79 cruiser in for a tune after having some gslfab goodies fitted

Matt’s 383 SBC In the build:This thing is built tough with all the right gear:• DRP crank• S**t rods• Wiseco pistons• Co...
20/04/2026

Matt’s 383 SBC In the build:

This thing is built tough with all the right gear:
• DRP crank
• S**t rods
• Wiseco pistons
• Comp Cams hydraulic roller cam
• Johnson lifters
• DRP cylinder heads
• Comp Cams roller rockers

Gavin’s VF LS3 in for a tune after already having fitted australiaspeed triple step headers and catback, we then fitted ...
09/04/2026

Gavin’s VF LS3 in for a tune after already having fitted australiaspeed triple step headers and catback, we then fitted a Ramjet otr and gave it a mafless tune! 304rwkw and 544nm

Address

22 LASSCOCK Road
Griffith, NSW
2680

Telephone

0269640467

Website

Alerts

Be the first to know and let us send you an email when AVR Dyno Centre Griffith posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to AVR Dyno Centre Griffith:

Shortcuts

Share

Category