RMS Performance Engineering

Call Directions Website Contact the business

RMS Performance Engineering Specialising in mechanical repairs, maintenance, performance enhancement and engineering solutions. Linkpop.com/rmsperformance

RMS can look after your equipment whether it be a race car or your daily driver. specialists in diesel performance and 4x4 customization with 15 years industry experience.

Another projector complete Full rebuild on this 1HD-T as well as a front mount intercooler install
19/10/2026

Another projector complete

Full rebuild on this 1HD-T as well as a front mount intercooler install

Snorkel and Airbox install on this Y62 along with a full service
14/10/2026

Snorkel and Airbox install on this Y62 along with a full service

✅ Yes, we will service your new car ✅ Yes, you will keep your warranty✅ Yes, we are a lot more expensive than the dealer...
08/10/2026

✅ Yes, we will service your new car
✅ Yes, you will keep your warranty
✅ Yes, we are a lot more expensive than the dealership and here is why!

This 3 year old Y62 has had 3 services in its lifetime and yet the driveshafts have not been greased once!

We don’t just tick and flick the sheet and call it a day, we do a full service and a full inspection to make sure your car continues running smoothly for years to come.

What a shocker! Full rebuild on this set of Walker Evans coilovers from a Polaris UTV
30/09/2026

What a shocker! Full rebuild on this set of Walker Evans coilovers from a Polaris UTV

Another TD in for a tune. This one running one of our 11mm pumps and 18G turbo combos. Was pretty well perfect out of th...
25/09/2026

Another TD in for a tune. This one running one of our 11mm pumps and 18G turbo combos. Was pretty well perfect out of the box but given that this thing is running 4:3 diff gears and 33s we pulled a little bit of fuel out down low just to make it a little bit smoother.

212HP/620NM - 22PSI/20:1AFR

🐌 RMS 18G
⛽️ RMS 12MM

Something a little different in the workshop today. 1987 G20 Panel Van powered by a 350 Chev in for a new torque convert...
14/09/2026

Something a little different in the workshop today. 1987 G20 Panel Van powered by a 350 Chev in for a new torque converter and some transmission repairs

This was a fun little project we took on recently. This customer had recently purchased a nice patrol equipped with trip...
09/09/2026

This was a fun little project we took on recently.

This customer had recently purchased a nice patrol equipped with triple bypass shocks in the front. Unfortunately, the shock length was far too long for the mounting design to make effective use of the travel and the bypass tubes. The other issue was that the lower mount design hadn’t taken into account the effect that castor angle has and as a result the lower shock eyes were contacting the tie rod.

We concluded that the most cost effective option was to re work the lower mounts and install a set of Superior Engineering 2.5” 3 way adjustable shocks.

The result, a good 40/60 travel ratio with rubber mounting that does not make contact with the tie rod.

Looks a little bit neater too!

Dimes stacked by Wh***ey business customs

That’s another Don River Dash in the books. A full on weekend of recovering broken cars and bikes. Try as we might, the ...
07/09/2026

That’s another Don River Dash in the books. A full on weekend of recovering broken cars and bikes.

Try as we might, the old kettle still won’t boil with a high temp of 93 degrees recorded while towing a completely dead Class 1 buggy several kilometres through soft sand.

But the real star of the show was our new Superior Engineering shocks. Off the shelf valving with some minor adjustments to the clickers had them out performing our old King Shocks!

Bring on DRD 2027!

This neat little shorty in for a whole range of repairs including a new clutch. Unfortunately, like most external wasteg...
03/09/2026

This neat little shorty in for a whole range of repairs including a new clutch.

Unfortunately, like most external wastegate set ups we see there was far too little spring pressure and we were only able to achieve 21PSI from it so it was safe tuned to this.

199HP/535NM - 21PSI/20:1AFR

🐌 believed to be a GTX3071
⛽️ unknown 12mm

We will be closed this Friday as we head to the Don River Dash
02/09/2026

We will be closed this Friday as we head to the Don River Dash

Address

29 Fursden Street
Glenella, QLD
4740

Opening Hours

Monday 9am - 4pm
Tuesday 9am - 4pm
Wednesday 9am - 4pm
Thursday 9am - 4pm
Friday 9am - 1pm

Telephone

+61419498595

Website

Alerts

Be the first to know and let us send you an email when RMS Performance Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to RMS Performance Engineering:

Shortcuts

Share

Category