Wally’s Workshop

Directions Contact the business

Wally’s Workshop Wally’s Work shop is the DJW racing HQ were documenting the highs and lows of our family adventures

When uncle ash reminds you that there’s a Kingswood in his garage awaiting the new shed to be built 😅 almost forgot abou...
20/10/2026

When uncle ash reminds you that there’s a Kingswood in his garage awaiting the new shed to be built 😅 almost forgot about this one 🤓

So we been busy still chipping away with the shed development there’s a lot of paper work and documents that needed to b...
17/10/2026

So we been busy still chipping away with the shed development there’s a lot of paper work and documents that needed to be in place for council regs 🙄 but we are pretty much ontop of it all now, just waiting on a soil test then we are good to go finally 🙌🏼 we’ve had some great trades jump on board to help out for what Mum, Dad and the crew can’t manage 💙
Oh and some fresh wheels rocked up in the post last week 😅😎
Robbie’s been giving the heads a final touch up and we’ll be in full assembly in a few weeks, see if we can make this Banaraby drag n drive 💪🏻

Our good friends at CQ Drivelines & Balancing Gilli and Rach have donated another $500 to Hazels Cancer Council Fundrais...
06/10/2026

Our good friends at CQ Drivelines & Balancing Gilli and Rach have donated another $500 to Hazels Cancer Council Fundraising for the big chop 12/10/26.
We really appreciate the support guys 💙💙

We can build Custom Drive Lines, repair your Tail Shafts, Engine balancing and Fly Wheel Balancing

The Warflow performance cars have always been our bench mark from day 1 they build a bloody tough aspo car 💪🏻, Neil’s PB...
04/10/2026

The Warflow performance cars have always been our bench mark from day 1 they build a bloody tough aspo car 💪🏻, Neil’s PB in the commodore yesterday at the Goldrush 660 let’s see what Kerry brings to the party 😂 💪🏻 there Flacon and commodore are were we want to be with our GTS!
Consistency and reliability street strip 9sec Aspo chrome bumper 🙌🏼 we will get back at it and chip away within the next month,
Have a look at that half track pass 💪🏻💪🏻💪🏻💪🏻

💙💙💙🙏
04/10/2026

💙💙💙🙏

💰 $𝟭,𝟬𝟬𝟬 𝗥𝗔𝗜𝗦𝗘𝗗! 𝗡𝗢𝗪 𝗧𝗛𝗔𝗧'𝗦 𝗔 𝗪𝗜𝗡-𝗪𝗜𝗡! 💛

Our CQ GoldRush660 𝟱𝟬/𝟱𝟬 𝗠𝗼𝗻𝗲𝘆 𝗕𝗼𝗮𝗿𝗱 𝗥𝗮𝗳𝗳𝗹𝗲 raised a fantastic $𝟭,𝟬𝟬𝟬!

🎉 𝑪𝒐𝒏𝒈𝒓𝒂𝒕𝒖𝒍𝒂𝒕𝒊𝒐𝒏𝒔 𝒕𝒐 𝑴𝒆𝒍𝒊𝒔𝒔𝒂, who walked away with a very handy $𝟱𝟬𝟬!

❤️ From the outset, we had something special planned for Benaraby Dragway's $500 share. Rather than keeping the proceeds, we wanted to support 𝗛𝗮𝘇𝗲𝗹 𝗪𝗮𝘁𝘁𝘀 as she prepares to ROCK THE CHOP for Cancer Council's Ponytail Project!

Hazel is the daughter of long-time drag racer and Benaraby Dragway supporter Damien Watts, and we're proud to get behind her as she prepares to 𝗥𝗢𝗖𝗞 𝗧𝗛𝗘 𝗖𝗛𝗢𝗣!✂

Cancer has touched the lives of so many people in our community. It's particularly close to home for us, with our own Committee member Laura Balfre currently undergoing treatment.

This is our chance to rally around a cause that matters to so many of us.

𝗔 𝗛𝗨𝗚𝗘 𝘁𝗵𝗮𝗻𝗸 𝘆𝗼𝘂 to everyone who got behind our raffle. It's pretty special when our racing community can come together, have a bit of fun and make a difference at the same time.

✂️ 𝐋𝐞𝐭'𝐬 𝐤𝐞𝐞𝐩 𝐭𝐡𝐞 𝐠𝐞𝐧𝐞𝐫𝐨𝐬𝐢𝐭𝐲 𝐫𝐨𝐥𝐥𝐢𝐧𝐠! If you'd like to give Hazel's fundraising efforts an extra boost, you can donate directly here:

👉 https://www.ponytailproject.com.au/fundraisers/hazelwatts

🏁 𝑩𝒆𝒄𝒂𝒖𝒔𝒆 𝒐𝒖𝒓 𝒓𝒂𝒄𝒊𝒏𝒈 𝒄𝒐𝒎𝒎𝒖𝒏𝒊𝒕𝒚 𝒊𝒔 𝒂𝒃𝒐𝒖𝒕 𝒔𝒐 𝒎𝒖𝒄𝒉 𝒎𝒐𝒓𝒆 𝒕𝒉𝒂𝒏 𝒓𝒂𝒄𝒊𝒏𝒈.💛

28/09/2026

The Master Mr Abbott working his magic 🙌🏼👌🏻Abbott Engine Reconditioning
These heads were Fkd I thought they were going in the bin but this guy is a freak 🙏💙

25/09/2026
Quick little play this morning we serviced the drive shaft on the Powermaster starter for the GTS, and measured up some ...
24/09/2026

Quick little play this morning we serviced the drive shaft on the Powermaster starter for the GTS, and measured up some driveline components for our wheels speed sensor more data the better they say 😜 FuelTech Australia we will get frank and the crew to get us sorted with all the bits we need 🙌🏼👍🏻
Roll cage has all been painted now by our magician Chris Fitzhenry so we will start to get it back into the car after lunch, can’t stress enough how well this cage was built and the ease to remove it HBR Race cages and fabrication give Heath a buzz for all cage related and fab work.
Oh hang on almost forgot we have a new 3.89 centre going in also to drop the RPM over the 1/4 👍🏻

24/09/2026

Address

Kirkwood
Gladstone, QLD
4680

Website

Alerts

Be the first to know and let us send you an email when Wally’s Workshop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Wally’s Workshop:

Shortcuts

Share