ABR Performance & Electrical

ABR Performance & Electrical For all your performance and automotive needs! We specialise in performance upgrades and electrical repairs.

We do full rewires and aftermarket ECUs and everything in between.

Troy's VH SLE came up an absolute treat.After sitting for years after paint and interior being done, we smashed out the ...
01/02/2025

Troy's VH SLE came up an absolute treat.
After sitting for years after paint and interior being done, we smashed out the build. Should be a great cruiser with more than enough power on tap.
Crate LSA
Built 4l80e manualised with lockup
9" diff
Precision Metalworks twin 2.5" to single 3.5" stainless exhaust
GJ Drivelines tailshaft
Castlemaine Rod Shop K-Frame spacers, engine mounts, trans mount and extractors
Aeroflow Performance fittings throughout
Aeromotive Fuel Systems fuel hanger kit
Factory LSA VF ECU
Wilwood Disc Brakes Big brake kit
FENIX Radiators Radiator

We recently did some work on Mark's 260z, fitting up a Haltech ECU with a custom engine loom, Haltech Multi-Function CAN...
30/01/2025

We recently did some work on Mark's 260z, fitting up a Haltech ECU with a custom engine loom, Haltech Multi-Function CAN Gauge, Link ECU KnockLink G4, along with twin Maradyne thermo fans to keep it cool

Using the Elite 750 with the MSD 6AL to retain the classic look of the ignition coil and distributor but with all the benefits of modern engine control.

Aus Transmission fleet vehicles! We've done some work for Aus Transmission recently, fitting their fleet vehicles with: ...
05/03/2024

Aus Transmission fleet vehicles!

We've done some work for Aus Transmission recently, fitting their fleet vehicles with:
Beacons
Work lamps
Squawkers
Light panels
Reverse cameras
GME PIRB Emergency Locator Beacons
Canopy interior lighting
UHF systems
The full works!

They were a gem to work with and certainly have more planned in the future so keep an eye on our page!

Got fleet vehicles that need to be kitted out? Shoot us a message!

Modified VE LS2 Loom Rerouted crank angle wiring and connector to avoid extreme heat, common issues on LS Series with he...
03/03/2024

Modified VE LS2 Loom

Rerouted crank angle wiring and connector to avoid extreme heat, common issues on LS Series with heat sleeves on high heat areas with Raceworks and Proflow combined, and fully wrapped in Tesa tape.

Got an LS that has had the crank angle connectors and wiring replaced? We'll reroute it to avoid future complications!

One of our own! We've been busy getting ready for the drags, but here's our 670hp Built AU FAIRLANE GHIA! Haltech Barra ...
20/12/2023

One of our own!

We've been busy getting ready for the drags, but here's our 670hp Built AU FAIRLANE GHIA!

Haltech Barra Plug-in
IC7 Dash
FG Steering Wheel
Surge Tank Setup
Forged Built Engine
TurboSmart 45mm HyperGate
Walbro 525 Fuel Pump
Pierburg Intake Lift Pump
ZF6 Conversion
FG Turbo Brake Setup
G42 High Mount Turbo
AN Lines Throughout
Raceworks Catch Can
Aftermarket Radiator
Custom Made Inlet and Exhaust Manifolds
FG PWR Intercooler
Porsche Atlas Grey Respray
Launch Control and Anti Lag
Sony XAV-AX6000

To attempt to keep her from not spinning way into third, we moved from the Lensos 20" (which are now on our soon-to-be-ready Built BF, keep your eye on our page!) to Outlaw Drag Wheels 275/60/15 Nankang NS2R on the rear, and we've got to be honest, the tyres struggle to keep her moving on the ground without spinning all the way into third!

Have you got performance upgrades that need to be installed before Summernats?
Shoot us a message and let's book it in!

Jordan's VX Commodore skid car! Today we've installed trans temp, volts, oil pressure and water temp gauges Got gauges t...
01/11/2023

Jordan's VX Commodore skid car!

Today we've installed trans temp, volts, oil pressure and water temp gauges

Got gauges that need to be installed? Contact us today!

We have changed our name! We were formerly trading as Melton Automotive Electrical and have started transitioning to ABR...
31/10/2023

We have changed our name!

We were formerly trading as Melton Automotive Electrical and have started transitioning to ABR Performance & Electrical.
You may see MAE around here and there as we slowly transition the business.

We are still a mobile service so we come to you!

We can still be contacted on 0450 923 104
Please note, there is an update to the email - [email protected]

If you cannot get a hold of us via mobile, we may be with a customer so please leave a message or email us so we can get back to you as soon as we are available.

We can be contacted via Messenger, mobile and email regarding enquiries and bookings.

We do travel further out of the Melton area, but we do ask when you contact us to let us know:
- What you need done
- Vehicle and engine
- The area you are from
- Days you are available
- If you require parts to be supplied

Services we provide include, but are not limited to:
- Haltech Installations
- Base Maps
- EFI Conversions
- Barra and LS Conversions
- Full or Partial Wiring Looms Repairs & Add ons
- Head Unit Installations
- Turbo Set-Ups
- Battery Relocation
- Hidden Wiring
- Gauges
- Wiring Tidy Up
- Performance and Basic Electrical Work
- Brake Controllers
- Dual Battery Set Ups

We also provide services for fitting valve springs for Barras (BA/BF/FG/FGX).

Our website is coming soon...!

Address

Eynesbury, VIC
3338

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm

Telephone

+61450923104

Website

Alerts

Be the first to know and let us send you an email when ABR Performance & Electrical posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to ABR Performance & Electrical:

Shortcuts

Share

Category