Higgins Race Heads

Higgins Race Heads Higgins Race Developments builds on the extensive engine building and cylinder head design experience of proprietor Nathan Higgins.
(1)

Saturday arvo cruising on some Cleveland heads
13/06/2026

Saturday arvo cruising on some Cleveland heads

Saturday morning hereโ€™s a couple of heads we are working on.We have Fords and Chevys on the go.If you donโ€™t like eithe...
05/06/2026

Saturday morning hereโ€™s a couple of heads we are working on.We have Fords and Chevys on the go.
If you donโ€™t like either of them the LS in the background will be next so I think we have you covered the most of your horsepower needs.
All manufactured right here in Melbourne๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ

Our Aussie made SB2H heads ready to go over to England๐Ÿ’ช๐Ÿ’ช๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿด๓ ง๓ ข๓ ฅ๓ ฎ๓ ง๓ ฟWe have several port combinations for Racing and the St...
29/05/2026

Our Aussie made SB2H heads ready to go over to England๐Ÿ’ช๐Ÿ’ช๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿด๓ ง๓ ข๓ ฅ๓ ฎ๓ ง๓ ฟ
We have several port combinations for Racing and the Street. You wonโ€™t have any problems with water temperatures like you do with billet heads on the street plenty of water in these๐Ÿ’ช๐Ÿ’ช๏ฟผ

Just some of the heads going through the shop at the moment. All manufactured here in Melbourne and all at different sta...
22/05/2026

Just some of the heads going through the shop at the moment. All manufactured here in Melbourne and all at different stages of the process.๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ
SB2H CHEVY
FORD CLEVELAND
LS3 AND LS7

We also tested our billet manifold on the weekend which did exactly what we thought it would do. Make more torque but su...
19/05/2026

We also tested our billet manifold on the weekend which did exactly what we thought it would do. Make more torque but surprisingly it made a little bit more horsepower at 7000 rpm than out cast 4150. Our cast one makes more power after 7000rpm no surprise with how the plenum was designed.

18/05/2026

804HP 643FT Lbs, Hydraulic cam 419 cube. 11.7:1, Comp, 98 Pump fuel.
Everything off the shelf. 4150 manifold and carby.
Another reason why you should look very closely at the SB2H top end setup for a killer street/strip car package. Proves yet again you do not have to turn an SB2 motor to 10,000 to make power LIKE some think .
Spec it properly. 7000 is adequate to make power.
Chevy guru Paul Turner built this one for a customer. Glenn Wells Engines machined and Steff at Western Link Automotive for the dyno time๐Ÿ’ช๐Ÿ’ช๐Ÿ’ช๐Ÿ’ช๐Ÿ’ช๐Ÿ’ช๐Ÿ’ช๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ๐Ÿ‡ฆ๐Ÿ‡บ

A look at our new LS7 turbo ports. For our hydraulic LS7 heads. We have been working on these for a little while after w...
14/05/2026

A look at our new LS7 turbo ports. For our hydraulic LS7 heads. We have been working on these for a little while after we tested them on Mark Drews Torana going 200mph for 1/4

The Turner boys have this beautiful VK humming 427 hydraulic cam. 3 or 4@ drag challenges on motor and 20,000 kโ€™s later ...
04/05/2026

The Turner boys have this beautiful VK humming 427 hydraulic cam. 3 or 4@ drag challenges on motor and 20,000 kโ€™s later and running 9.6s all day.๐Ÿ˜‚๐Ÿ˜‚
Using our small port LS7 factory rocker heads
Jamie Turner

01/05/2026

Love working with great engine / Machine shops. The outcome is always great๐Ÿ’ช๐Ÿ’ช๐Ÿ’ช๐Ÿ’ช

23/04/2026

Couple exhaust ports ready to go๐Ÿ’ช

Address

1/11 Swift Way Dandenong South
Dandenong South, VIC
3175

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 9am - 5pm

Telephone

+61397683902

Website

Alerts

Be the first to know and let us send you an email when Higgins Race Heads posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Higgins Race Heads:

Shortcuts

Share

Category