Cane Toad Equipment

25/08/2026

BYD Shark do do do do... now that we've given you an earworm, let us make up for it with some super cool stock update. We're now in the position (pun intended) to lift your electric mule a couple of inches with this quality lift kit.

Lift your BYD Shark 6 by a full two inches and take control of how it rides. This complete Top Rhino front and rear suspension kit replaces the factory struts, shocks and coils with foam cell damping and a 24 stage compression adjuster, so you can dial the ride in for an empty tray around town or a loaded tub on corrugations.

The Top Rhino front struts carry an adjustable spring seat giving up to 65mm of ride height adjustment, letting you set stance precisely and compensate for the weight of a bull bar or winch. An internal soft top-out stop and extra down travel keep the ride composed where the standard setup runs out of stroke.

Liiiink:

Top Rhino Adjustable 2 Inch Lift Kit – BYD Shark 6 2024 to CurrentThis kit is designed to suit the BYD Shark 6 2024 to Current

22/08/2026

Oh and while our web team is now able to take a breather after polishing our online shop the warehouse guys is in full swing to pack our shelves with new bullbars and roof racks. :)

22/08/2026

Good morning everyone on this sunny (well at least here in our corner) Saturday.

To make a long story reall short: We've given the website a refresh.

The last couple of years have been busy: more products on the shelf, more ways to gear up a ute. Really good for you as a customer, but it meant our website started feeling a bit like a patchwork of everything we'd bolted on along the way.

So we spent some time pulling it all together properly.

Say you're after a canopy for your Hilux. You can now search for it, see straight away whether it actually fits your exact model, and know before you even open the page if you can grab it from our Brisbane warehouse yourself. We were aiming to show all the specs in same place and make it easier to flick through customer builds in the showroom.

It's also just a nicer looking site now, easier on the eyes and easier to find your way around.

We've gone through it carefully, but with changes this big there'll be the odd small thing we haven't caught yet. If something looks off or isn't working the way it should, just give us a shout and we'll get onto it quickly.

Hope you enjoy the new look. Thank you all for sticking with us while we've been growing.

Keen to check it out? https://www.canetoadequip.com.au/

30/05/2026

Only one left in stock and it won't last long.

The Original TRADECAP Aluminium Canopy is built for Ford Ranger PX1, PX2, PX3 and Mazda BT-50 dual cab utes from 2011 to 2021. Lightweight aluminium construction, powder coated finish, and front and rear windows fitted as standard. At $2,500, it is one of the sharpest priced alloy canopies going around for these platforms.

Whether you are kitting out a work ute or building a touring setup, this is the canopy that does the job without overcomplicating it.

One unit. Once it is gone, it is gone.

Grab it here before someone else does: https://www.canetoadequip.com.au/product/original-tradecap-aluminium-canopy-roof-rack-powder-coated-ford-ranger-px123-and-mazda-bt50-powder-coated-pid1266?srsltid=AfmBOopBaUrNOtVa2cksANwjOAfE2CoEl0MRixl8AtVfq6Knn1AaU333

30/05/2026

Only 2 of these left in stock - and if you're running a Dodge Ram 1500/2500 LWB with a 6.7ft tub, this is worth your attention.

The Gen 2 TRADECAP Steel Canopy is built heavy duty, finished in matte black, and designed to fit the 2011–2026 Ram properly, not as an afterthought. Whether you're a tradie needing secure storage or an overlander wanting a solid base to build on, steel construction means it's not going anywhere.

At $2,995.00, it's serious gear for a serious ute.

Two units. That's it. Once they're gone, they're gone.

https://www.canetoadequip.com.au/product/Gen-2-TRADECAP-Steel-Canopy-for-Dodge-Ram-1500-SWB-2011-2024-57-Foot-Tub-Ute-Heavy-Duty-Matte-Black-pid1253

29/05/2026

Steel vs Aluminium Canopies: Which is Right for You?

Steel or alloy, it's one of the most common questions we get about ute canopies, and the answer isn't the same for everyone.

Here's the short version:

Steel canopies are tougher under serious abuse, generally cheaper upfront, and easier to repair in the field. If you're a tradie throwing tools around daily or working in rough conditions, steel makes a lot of sense.

Aluminium canopies are significantly lighter (which matters if you're already close to your payload limit), naturally corrosion-resistant, and better suited to touring and camping builds where weight is a real consideration.

But what's the trade-off? Alloy costs more and a solid hit can be harder to fix than a dent in steel.

There's no universal winner here, it just comes down to how you use your ute, what you're hauling, and where you're headed.

We've broken down the full comparison on the blog, weight differences, cost ranges, real-world use cases, and what to think about before you buy.

https://www.canetoadequip.com.au/blog/Ute-Canopy-Showdown-Aluminum-vs-Steel-for-Aussie-Adventures

Round two of our Canopy Comparison Guide

19/04/2026

Not sure which canopy fits your ute? We've got you.

Our step-by-step Canopy Configurator walks you through everything - vehicle, height, material, roof storage, and colour - so you know exactly what you're getting before you buy.

🔧Build yours: canetoadequip.com.au/canopy-configurator

19/04/2026

ONLY A$ 3,595

Turn Your Dual Cab Ute Into a Workhorse with the Pioneer Steel Tray with Trundle Drawer and Rear Ladder Rack Combo Package

Ready to seriously upgrade your dual cab ute? The Pioneer Steel Tray is built tough for Aussie conditions, transforming your ride into a versatile work and adventure platform.

Whether you're hauling tools to the job site, loading up for a weekend camping trip, or hitting the tracks, this tray is engineered to handle it all. Forget flimsy factory trays; this is the real deal.

Find out more: https://www.canetoadequip.com.au/product/Pioneer-Steel-Tray-with-Rear-Ladder-Rack-and-Drawer-Combo-Pack-for-Dual-Cab-Ute-1850-x-1850-Powder-Coated-Matte-Black-Universal-Fitting-for-Hilux-Ranger-D-max-Navara-Cannon-LDVT60-pid1418

13/04/2026

Ford Ranger Next Gen owners - this one's for you!

Our Alloy Roof Rack Platform with Backbones is now in stock and ready to ship from our Brisbane warehouse. Purpose-built for the PY 2022+ Dual Cab, this flat rack is the perfect foundation for your build.

✅ Aluminium platform + steel backbones
✅ 135 x 125cm load area
✅ Light bar mounting ready
✅ Matte black finish
✅ Perfect fit for Ranger Next Gen PY & Raptor Next Gen
✅ Ships same day from Brisbane

From just $499.95 - or split it 4 ways with Afterpay, Zip, or Klarna.

👉 Shop now: https://www.canetoadequip.com.au/product/Alloy-Roof-Rack-For-Ford-Ranger-Next-Gen-PY-2022-Platform-Carrier-and-Backbones-Flat-Rack-pid1408

11/04/2026

We understand that growing shipping fees caused by the current oil crisis hurt a lot of customers. Well, did you know that we offer Click & Collect for most of our bigger items (Canopies, Bullbars, Roof Racks)? Select Pick Up and come directly to our warehouse at Coopers Plains.

This also gives you also an opportunity to meet our friendly staff AND ask any install questions you may have. Our warehouse team will gladly help you out. :)

Shop at: https://www.canetoadequip.com.au/shop