JPS Motorsports Electronics

17/11/2025

Time to build another big block RB twin cam Franksenstein V2 for the RDirty3. Starting at the bottom with a high capacity sump (we still have a little conrod panel beating to repair) and work our way up. They can never have enough oil !!
Keep an eye out for step two, the custom crank grind that we just finished the drawings for.

12/06/2025

Skyline RB LS2/7 coil pack upgrade complete. Eliminates Heat build up, inaccurarte timing adjustments, old brittle wiring and high boost misfires, many more coil pack brand choices.

16/05/2025

testing the repair of the R33 skylines wing brake light.

10/08/2024

Time for some fatties for the starlet project "Paddington"!!

17/07/2024

WARNING *** this design may leak fuel causing harm or fire.
installed in a return line under minimal pressure, the mounting bracket bolts holes over drilling break through in to the bypass flow tube causing leakage. if installed under pressure, can be very dangerous. see photos of protrusions that had approximately a 2mm surface area leak past the mounting threads.

06/06/2024

Turning an old bent 80's iconic restorers dream quad bike chassis into a reinforced rails, repaired to straighty180, powder coated classic.

06/06/2024

Sometimes the welding project is not for you.... this stainless shelving unit / spice rack just took to a personal level custom products.

19/05/2024

Project Paddington got it's long overdue ignition upgrade. The kit included Wasted spark LS2 coil packs, custom LS plug leads, custom mounting bracket, custom reluctor sensor mount, modified dizzy cap including new bearings, new seals inside & out and some extra heavy duty ignition wiring.
Engine sounds more crisp, idles lower, 0.220ms timing drift compared to over 0.9ms prior. Time to go racing!!

09/04/2024

Long range fuel tank modified for project "Subadub" with twin anti-surge pots and 530LPH Walbro pump that should easily feed all the boost the 58' Beetle chassis can handle.

09/03/2024

The new Skyline project needed a beefier fuel supply and payload to match the new turbo demands. So a brand new billet twin pump surge tank gets chopped up another welding project begins. mission: build a 30L cell that actually fits the vehicle and mounts nice and low without modifying the structure in any substantial way.

07/03/2024

Some welding projects.
Broken gearbox mount from an ATV. Sealed catch can to a vented version and the JPS Skyline's fuel rail upgrade to AN8 feed and return fittings that never don't loosen.

26/12/2023