First On Finish Zinc Platers

First On Finish Zinc Platers WE DO NOT DO CHROME PLATING!!!!!!! ZINC PLATING ONLY! SILVER,GOLD,BLACK AND OLIVE DRAB(GREEN)

Blood,sweat and tears went into this business,😡All for the customers,And for those that actually know me,I did it for th...
17/02/2024

Blood,sweat and tears went into this business,😡
All for the customers,
And for those that actually know me,I did it for them,the customer!
After a long time in isolation,
I'm BACK💪

I'm about to read some of the comments, accusations,threats and opinions of those I may of upset,but be warned,
I will right what went wrong,and respond to all messages,Comments and yes,
You will hear from me very soon,
Please leave your Name,Number or address if you chose to in the comments below and I will respond to you ALL next week,

Sometimes,it's not all about the customer,
Business is a hard gig,
Think about it!!!
F O F ZINC PLATERS

18/03/2023

'NEW LOCATION'
After 6 years of doing business in Caboolture and living in Caboolture for 24 years,its time for a change.
We will be relocating to the Sunshine Coast to continue on with Business as usual.
If we can't be reached via phone or text,please message us here or by email [email protected] and we will respond asap.
This has come at short notice and we will be moving out of this shed on 31st March 2023.

Thank you for your continued support over the first 6 years and look forward hearing from you soon.
NEW LOCATION TO BE CONFIRMED ASAP
Cheers
Rick and Rhys

15/01/2023

SORRY,WE DO NOT DO CHROME PLATING!!!!!

First of all,2022 was a rough year for us,as alot of people know,I had a few personal problems which affected my business and ability to function properly.
After almost 3 weeks off to work on myself,
We are back and ready for 2023.
With our now 3rd year apprentice Ferguson stepping up to plate,im sure we will continue to provide the Quality and Service as we have for the last 6 years!!
This year,
Our turnaround time will be a minimum of 4 weeks due to our workload,so please get your parts in early to avoid disappointment.
Looking forward to helping out where we can and wish you all a happy and safe 2023

Rick

PLEASE NOTEWE DO NOT DO CHROME PLATING!!!!ZINC PLATING ONLYA few pics of what we got up to at the end of a very challeng...
02/01/2021

PLEASE NOTE

WE DO NOT DO CHROME PLATING!!!!

ZINC PLATING ONLY

A few pics of what we got up to at the end of a very challenging year.
I have been running solo since this business started 4 years ago,and the hard yards are starting to paying off.
This is a very time consuming job and as the business is attracting new customers from almost all states of Australia,
Its time to welcome on board,
our new apprentice Rhys Ferguson👍👍

Im looking forward to passing on my knowledge of this trade and providing the best possible quality and service for years to come.

It has taken time,but yes,
BLACK ZINC is now available along side of our Silver(Blue)zinc
Gold Zinc and also Olive drab(Green)

Please allow between 2-6 weeks to have jobs completed as this is going to be a very busy year for us.

We will be back at it again on 11/01/2021.

Feel free to call and book jobs in from the 4/01/2021.

Cheers

Rick

Ph 0413826092 between 8.00am and 3.30 pm Monday to Friday.
After hours appointments are available.

Some more photos of another restoration I have had the pleasure of being apart of!!!!What an awesome job Rob and Jan Bru...
28/09/2019

Some more photos of another restoration I have had the pleasure of being apart of!!!!

What an awesome job Rob and Jan Bruce have done on this,well done

Another happy customer from Melbourne sent some pics of his restored 94 kx 125,Its good to see the end result with all t...
24/09/2019

Another happy customer from Melbourne sent some pics of his restored 94 kx 125,
Its good to see the end result with all the Zinc Plated original hardware back on this bike.

Total cost for all nuts,bolts,axles and brackets on these bikes range from $250-$350

It's a cheaper alternative than buying new bolts and keeps these older bikes in original condition.

All parts are counted and wired up individually to be Zinc Plated by hand to avoid LOST PARTS!!!!

For more info
Ph Rick on 0413826092 between 8.00am - 3.00pm Monday -Friday

Before and afterHx panel van bonnet hingesCost $50 eachBetter than new
28/03/2018

Before and after
Hx panel van bonnet hinges
Cost $50 each
Better than new

Before/After xr gt brake booster parts
25/03/2018

Before/After xr gt brake booster parts

20/03/2018

Xr gt brake booster parts.
Alot of work in restoring these older components,well worth doing.

Address

Unit 4/8 Lear Jet Drive
Caboolture, QLD
4510

Opening Hours

Monday 8am - 3pm
Tuesday 8am - 3pm
Wednesday 8am - 3pm
Thursday 8am - 3pm
Friday 8am - 3pm

Website

Alerts

Be the first to know and let us send you an email when First On Finish Zinc Platers posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to First On Finish Zinc Platers:

Shortcuts

Featured

Share

Category