OCD Engines

Call Directions Contact the business

OCD Engines Rotary engine rebuilds, Efi installation and Tuning. Specializing in Aftermarket ECU tuning and installations.

Microtech job I did recently. I really need to get updated pics. But you'll get the idea from what I have posted here. T...
30/09/2026

Microtech job I did recently. I really need to get updated pics. But you'll get the idea from what I have posted here.
This LT10C has the usual engine control with fuel and oil pressure set up, with a 7inch dash and 4 extra pressure sensors to monitor the air bag system at each corner of the car. The dash is also wired into the headlights, low and high beam, indicators and fuel tank for fuel level.

Pics include, some splicing, harness for fuel pumps, main power to panel, unfinished panel, ECU harness, Dash harness, fuel level harness, drill and tap thread for IAT in charge pipe.

Cheers legends 😎🤙

Turbo rotary CAS wires repaired/replaced, fixed, with wire colours to match the microtech ECU. No solder used in the re...
02/09/2026

Turbo rotary CAS wires repaired/replaced, fixed, with wire colours to match the microtech ECU.
No solder used in the repair, 44 spec wire and a DTM connector with gold pins for best possible continuity.

Good features for the price point. 😎🤙
20/08/2026

Good features for the price point. 😎🤙

I asked AI to make this document to explain the differences in wire quality, commonly used in automotive applications an...
17/08/2026

I asked AI to make this document to explain the differences in wire quality, commonly used in automotive applications and systems.

Raychem spec44 is my go to for a custom club level motorsport harness.
Most of the manufacturers supplied wires are PVC 90 at best.

I hope this helps people to navigate through the wiring sales talk commonly seen online.

Always check TDC properly. This pulley was marked by the supplier, and as you can see, is 7 or so degrees advanced. This...
17/08/2026

Always check TDC properly. This pulley was marked by the supplier, and as you can see, is 7 or so degrees advanced.
This is more than enough to severely damage an engine, especially a turbo one.

Engine combo packed and boxed.Soon to be shipped to Asia.
02/05/2026

Engine combo packed and boxed.
Soon to be shipped to Asia.

Address

Buderim, QLD
4556

Telephone

+61415924322

Website

Alerts

Be the first to know and let us send you an email when OCD Engines posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to OCD Engines:

Shortcuts

Share

Category