Precision Performance and Mechanical

Precision Performance and Mechanical Precision Performance and Mechanical is available for all repairs, diagnostics, upgrades and servicing.

We specialise in all areas of late model falcon servicing, suspension and performance upgrades to suit everyone.

With the continued support of everyone and consistently finding the limitations of the roller dyno we are proud to annou...
28/07/2026

With the continued support of everyone and consistently finding the limitations of the roller dyno we are proud to announce we have got ourselves a mainline prohub.

With this new addition we can more safely and accurately cater for the bigger horsepower stuff while still doing everything else. If you’d like to book in for tuning get in touch.

01/07/2026

Hey everyone, the workshop will be closed today as we will be celebrating the marriage of one of the staff.

We are sorry for any inconvenience. Please message on Facebook or send any calls or enquiries to [email protected] or text 0411216382 with your name and some information and I’ll do my best to get back to you when I can.

Back to normal tomorrow 8-2pm

Attention, we will be closing early today at 11:30am to get ready and get a jump on traffic for the GROWL RACING 1/8th m...
18/06/2026

Attention, we will be closing early today at 11:30am to get ready and get a jump on traffic for the GROWL RACING 1/8th mile event this weekend.

Sorry for any inconvenience this may cause.

Had Zane’s fg xr6 turbo in around a fortnight ago for some works including a new Pulsar Turbo Australia gen 3 gtx3584 an...
19/03/2026

Had Zane’s fg xr6 turbo in around a fortnight ago for some works including a new Pulsar Turbo Australia gen 3 gtx3584 and ext gate kit, fresh set of valve springs after experiencing valve float on the last setup, a new timing tensioner after the non genuine unit failed and a custom dyno tune on PCMTEC multitune utilising the 4 bar boost sensor for better tunabilty and safety on the stock system over 23psi.

Leaving with 4 tunes including ghost cams, rolling antilag and a custom zf calibration to suit his built box we pulled 530rwkw on the roller.

Super clean car we’ve had the pleasure of working on for many years with the previous owner. Done well.

If you’re looking to turn yours up, modify it, repair it or fully build it give us a ring on 0411216382 or stop in to see us.

Had Hayden’s f6 in for its latest round of mods before it goes built motor, carried out Haltech Barra Plug n Play, 8 but...
18/03/2026

Had Hayden’s f6 in for its latest round of mods before it goes built motor, carried out Haltech Barra Plug n Play, 8 button keypad, 1650s, AES Racing Mufflers dump valve, assorted syltech pressure sensors for the Haltech and a custom dyno tune leaving with nearly 520rwkw on a stock bottom end at 25psi on its highest boost setting.

Hey guys, here’s one we finished up today.We’ve carried out the mods on this over the years and this customer asked what...
17/03/2026

Hey guys, here’s one we finished up today.

We’ve carried out the mods on this over the years and this customer asked what the next step was. After installing a twin pump surge tank, regulator and rail we’ve retuned this one on e85 using the PCMTEC multitune software - rolling antilag, high boost, low boost l, valet and ghost cams and a zf calibration utilising torque reduction strategies.

We’ve had a few tuning slots open up between now and the end of the month.

If you’re looking at tuning your vehicle, repairing or even servicing your vehicle please message us now and see what we can offer.

🔥🔥🔥Share it around🔥🔥🔥It is that time again.Chasing a qualified mechanic, performance industry experience is highly regar...
09/03/2026

🔥🔥🔥Share it around🔥🔥🔥

It is that time again.

Chasing a qualified mechanic, performance industry experience is highly regarded especially barra/ls. Come build cool stuff with us. Good money for the right candidate.

Call us on 0411216382 during business hours or email us your resume to [email protected]

Thanks

And that’s a wrap, another successful year done. A special thanks to the boys who make the work possible, other shops we...
19/12/2025

And that’s a wrap, another successful year done. A special thanks to the boys who make the work possible, other shops we work with, suppliers and friends. Without your ongoing support this wouldnbe possible.

Wish you all a merry Christmas and a happy new year. See you in 2026 🎄

We will be back on the 5th of Jan.

26/11/2025

Bit of housekeeping

From this day fourth all bookings will require a NON REFUNDABLE DEPOSIT.

Tune bookings $400 non refundable with the rest due on the day, not ready? Not our problem.

Mechanical bookings 30% of job value NON REFUNDABLE with the remainder to be paid after works carried out.

Too many people taking the p**s thinking “forgetting” their booking or “forgetting to tell us they can’t make it” is acceptable, this costs us money and lets everyone down. Now it’s time you become financially invested in your booking like I am.

Another reminder we are also not a storage facility you will be slapped with storage fees if you are unable to pickup your car on the day planned, no exceptions.

Thanks for reading.

Here’s another one we finished up a few weeks ago Adam’s fgx xr6 turbo.In house entry level built motor with Spool Impor...
19/07/2025

Here’s another one we finished up a few weeks ago Adam’s fgx xr6 turbo.

In house entry level built motor with Spool Imports forged pistons and h beam rods (we rate this combo at 800hp but some rate it higher I prefer to under promise and over deliver)
in house built diff
In house Trans cooler wired to the haltech
Fab completed in house
Pulsar Turbo Australia g40 1150
Competition Coatings on the burnt bronze hotside
plazmaman.com on the intercooler, plenum and twin pump surge
Haltech plug and play and ic7 plus the usual sensors required fo saftey wired in
Base and engine run in completed on my roller and then sent up to Jamie Forced Performance & Tuning to put the finishing touches on with the hub.

All round a pretty cool fgx hope he gets heaps
of fun out of it.

If you’d like us to carry out work on your vehicle send us a pm, big, small, servicing or repairs we literally do it all.

🏠 Unit 2 Number 53 Tradelink road Hillcrest 4118
📞 0411 216 382
📧[email protected]

Address

2/53 Tradelink Road, Hillcrest
Brisbane, QLD
4118

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 2pm

Telephone

+61411216382

Website

Alerts

Be the first to know and let us send you an email when Precision Performance and Mechanical posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category