Advanced Engine Performance

Directions Website

Advanced Engine Performance Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Advanced Engine Performance, Automotive, aircraft & boat, 17 Birubi Street Coorparoo, Brisbane.

Another Holden custom rebuild 357 Cube VN style Hydro Roller engine shipping, we reused as many of the original parts as...
01/10/2026

Another Holden custom rebuild 357 Cube VN style Hydro Roller engine shipping, we reused as many of the original parts as possible, small cam, small compression, but with precision machining and the addition of only our Version 0 standard valve factory OEM Cast Iron CNC heads that provided a massive average torque of 433 FT LBS from 4000/6700 RPM with a good peak of 452 FT LBS, and equally good peak power of 516 HP at 6700 RPM with very very conservative tuning on PF 98. Exactly what this customer wanted.

We installed more CNC machinery this year and we are running out of floor space so we are starting to move on our dyno d...
01/09/2026

We installed more CNC machinery this year and we are running out of floor space so we are starting to move on our dyno development engines, starting with one of our Holden engines, 360 Cube, our Version 1 B cast style early factory OEM CNC heads, Trimatic pattern, Commodore oil pan, single plane intake, custom AEP street SR camshaft and the careful parts selection and machining we use in our 600 HP engines. 455/460FT LBS of torque and a massive average of 440 FT LBS from 4500 to 7000 RPM, 545/550 HP at 6900 RPM on PF 98 with conservative tuning. Fully refurbished in early 2025 with new forged pistons/rings, cam/lifters/chain set/drive gear, 59 dyno runs on the short, complete new heads 7/26, 9 dyno runs. Complete as tested less ancillaries/carby/dissy only, $20K with our support to the buyer.

Another Holden 383 Cube VN style Hydro Roller engine shipping, we used our Version 1/383/HR factory OEM Cast Iron CNC he...
26/07/2026

Another Holden 383 Cube VN style Hydro Roller engine shipping, we used our Version 1/383/HR factory OEM Cast Iron CNC heads in conjunction with our dedicated under bonnet intake, custom AEP camshaft, dedicated CNC bore profile, very careful parts selection and sizing provides the widest possible torque and power curves available with 450 FT BLS of torque even at 3500 RPM, a massive peak of 499 FT LBS and peak power of 531 HP at only 6200 RPM with very very conservative tuning on PF 98. Perfect for low convertor stall speeds and heavy cars, exactly what this customer wanted.

More Holden VN style factory OEM Cast Iron CNC heads shipping, these Version 1/383/HR heads are sized for capacities aro...
26/07/2026

More Holden VN style factory OEM Cast Iron CNC heads shipping, these Version 1/383/HR heads are sized for capacities around 383 Cube and are specifically designed for lower RPM hydro roller under bonnet engines and have enough airflow and volume for 550 HP even at 6000 RPM on pump fuel 98 and provide the widest possible torque and power curves available. Our higher versions provide even more power.

Another Holden 355 Cube VN style 475 HP engine shipping. We used our Version 1/355/HFT factory OEM Cast Iron CNC heads i...
21/06/2026

Another Holden 355 Cube VN style 475 HP engine shipping. We used our Version 1/355/HFT factory OEM Cast Iron CNC heads in conjunction with our dedicated under bonnet intake and custom hydro FT camshaft specifically designed to provide the best possible torque curve at this power level. With 400 FT LBS of torque available even at 3500 RPM, an average of nearly 420 FT LBS to 6500 RPM, and with strong mid range power and a peak of 481 HP at only 6300 RPM with very conservative tuning on PF 98, this is perfect for low convertor stall speeds and heavy cars, exactly what this customer wanted.

Another Holden 355 Cube VN style Hydro Roller engine shipping, we used our Version 2/355/HR factory OEM Cast Iron CNC he...
10/05/2026

Another Holden 355 Cube VN style Hydro Roller engine shipping, we used our Version 2/355/HR factory OEM Cast Iron CNC heads in conjunction with our dedicated under bonnet intake, custom AEP camshaft, dedicated CNC bore profile, very careful parts selection and sizing provides the widest possible torque and power curves available with a massive 440+ FT LBS of torque even at 4500 RPM, 525+ HP even at 6000 RPM and peaks of 482 FT LBS and 557 HP with very conservative tuning on PF 98. Exactly what this customer wanted.

More Holden VN style factory OEM Cast Iron CNC heads shipping, these Version 2/ 355 HR heads are sized for capacities ar...
10/05/2026

More Holden VN style factory OEM Cast Iron CNC heads shipping, these Version 2/ 355 HR heads are sized for capacities around 355 Cube and are specifically designed for lower RPM hydro roller cam under bonnet engines and have enough airflow and volume for 550+ HP on PF 98 and provide the widest possible torque and power curves available. Our higher versions provide even more power.

Address

17 Birubi Street Coorparoo
Brisbane, QLD
4151

Website

Alerts

Be the first to know and let us send you an email when Advanced Engine Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category