Dats Cool Fabrication

Dats Cool Fabrication We are a fabrication company for all sorts of performance applications

We had this luxy in to spice up the 5L starting out with a 4 into one manifold with a 40mm external gate setup with a ho...
29/08/2026

We had this luxy in to spice up the 5L starting out with a 4 into one manifold with a 40mm external gate setup with a holeset he221, 3” dump pipe, front mount intercooler tucked in nicely with 2.5” pipework, 3” intake pipe across to a custom airbox, 4” low cut snorkel, 1 3/4” party pipe and a lift pump to suit 🤙🏻

13/08/2026

Another one completed between both shops with great gains 🤝🏻

Vdj79 in for a 3.5” turbo back stainless exhaust, full v bands throughout, resonator for that nice deep vdj note, tucked...
07/08/2026

Vdj79 in for a 3.5” turbo back stainless exhaust, full v bands throughout, resonator for that nice deep vdj note, tucked nice and high at the rear to still have access to the grease ni***es on the shackles 🤙🏻

79 fte in with all the right bits to make some numbers. She rolled in with a ufi21L, +30’s and we got stuck in with a 3....
04/08/2026

79 fte in with all the right bits to make some numbers. She rolled in with a ufi21L, +30’s and we got stuck in with a 3.5” turbo back stainless exhaust, tucked inside the chassis rail to leave it plenty of clearance for sliders. Split the exhaust at the rear with twin 4” tips up under the tray. Nice big airbox hooked upto the armax snorkel, 4” alloy intake pipe with AN fittings for crank case breather, as big as we could fit custom front mount intercooler with 2.5” stainless pipework and rerouted the ac lines to fit the cooler. Keen to see how this one goes on the rollers down at Evolution Tuning 🤙🏻

Pulled a late one last night to get this 13b rx4 finished off in time for rotary riot at Queensland raceway today, this ...
25/07/2026

Pulled a late one last night to get this 13b rx4 finished off in time for rotary riot at Queensland raceway today, this one came in for a new turbo manifold setup to suit the twin scroll g40 Garrett using 2 turbosmart 40mm watergates, fit up a pwr cooler with existing bracket in the rad support, 3” cooler pipes with plazmaman clamps and a turbosmart raceport bov, 3.5” dump pipe hooked upto existing 3” exhaust, heat wrapped dump pipe with funk Motorsport heat wrap, funk Motorsport turbo beanie, pwr radiator, pwr oil cooler, custom fan shroud and a 16” spal fan. Good to see it out ripping up the track today 🤙🏻

Bagged 351 f100 in for a 3” stainless dual exhaust setup with varex mufflers for noisey or silent at the push of a butto...
24/07/2026

Bagged 351 f100 in for a 3” stainless dual exhaust setup with varex mufflers for noisey or silent at the push of a button, v bands through out and 4” tips out the back 🤙🏻

Gu zd crd in for the works, one of our 550 front mount intercooler kits, airbox and intake, 4” black snorkel, 3” turbo b...
23/07/2026

Gu zd crd in for the works, one of our 550 front mount intercooler kits, airbox and intake, 4” black snorkel, 3” turbo back exhaust and fitted a customer supplied cct stage 2 turbo then down to Evolution Tuning to tie everything in together on the dyno 🤙🏻

Bt-50 we had in a while for big front mount intercooler, trans cooler and exhaust back in to change the rear setup and a...
11/07/2026

Bt-50 we had in a while for big front mount intercooler, trans cooler and exhaust back in to change the rear setup and add in a electric valve to bypass the muffler and go straight pipe at the push of a button 🤙🏻

Address

7/37 Moroney Place Beerwah
Brisbane, QLD
4519

Opening Hours

Monday 8am - 4pm
Tuesday 8am - 4pm
Wednesday 8am - 4pm
Thursday 8am - 4pm
Friday 8am - 4pm

Telephone

+61435413574

Website

Alerts

Be the first to know and let us send you an email when Dats Cool Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Dats Cool Fabrication:

Shortcuts

Share

Category