Baker Bodyworx

Baker Bodyworx Vehicle restoration shop that specialises in Restoration to all makes and models of cars.

Just a little stone chip that most just fill and prime over but they hide the nastiness under the surface. These minor c...
08/08/2025

Just a little stone chip that most just fill and prime over but they hide the nastiness under the surface. These minor chips have opened up the paints surface allowing moisture to pe*****te the steel and causing rust. A thorough paint strip and sand with 80g is the only way to remove and not have these imperfections show up again 6months later in your fresh paint job.
I like to epoxy prime sealing the bare metal with 30mins of stripping as the bare metal is open to the air therefore rusting as you look at it.

VR SS Commodore is next in the shed. A closed door respray with a few minor dents and imperfections to address.With the ...
08/08/2025

VR SS Commodore is next in the shed. A closed door respray with a few minor dents and imperfections to address.
With the help of PDR (paintless dent repair) I will fix 95% of the dents and panel blemishes without the need for filler. I’ll wok through the process of a quick turnaround job on this one to give an idea of what’s involved.

Been a while between drinks but I’m back doing a few resto/paint jobs again in-between hail repair. VK Berlina wagon was...
08/08/2025

Been a while between drinks but I’m back doing a few resto/paint jobs again in-between hail repair.

VK Berlina wagon was a full bare metal respray with minor rust work.
Epoxy 2pak prime
Filler work with 3m platinum filler
Polyester primed and blocked
Debeer colour and clear products.

A good honest car with a few tweaks and colour sand is better than factory intended.

After a minor mishap a refresh was on the cards for the Ksev. Motor out meant a few changes while we’re at it.Can’t wait...
28/06/2023

After a minor mishap a refresh was on the cards for the Ksev.
Motor out meant a few changes while we’re at it.
Can’t wait to get her on the dumo and see if the new bling has any performance gains😉

08/11/2021

For over 20 years Barossa Radiators has been a family owned and operated business. With Scott and Lina, now enjoying their well earned retirement, we are excited to introduce ourselves as the new owners.

We (Nick and Jo) are excited for this next chapter and looking forward to continuing the exceptional service and quality of work Scott and Lina have supplied the region.

Nick has been in the automotive industry for over 20 years as a spray painter, panel be**er and car restorer. With a passion for old cars, dirt car racing, drifting and go-karting Nick has broadened his skills over the years and has trained with Scottie to be able to continue the service of replacing and repairing radiators, re-coring and maintaining Radiators with power flushes and cleanouts.

If you have a car suffering from overheating problems or need help with sourcing a radiator or part contact us on (08) 8563 0075.

Follow us on Instagram

📸Nick Baker Jarrad Klingberg

BE**ER VH is coming along nicelyTubs are done and a coat of black on the undersideJust gotta sort the diff in the new ye...
22/12/2020

BE**ER VH is coming along nicely
Tubs are done and a coat of black on the underside
Just gotta sort the diff in the new year and find some nice wheels.

Lots of pics of cars in primer lately so here’s a pic of a Monaro i did a while ago to prove colour goes through the gun...
20/11/2020

Lots of pics of cars in primer lately so here’s a pic of a Monaro i did a while ago to prove colour goes through the gun every now and again😂

Arguably the most important panel on a HQ coupe.Many forget it and just block the entire quarter. This will be challengi...
19/11/2020

Arguably the most important panel on a HQ coupe.
Many forget it and just block the entire quarter. This will be challenging and this sharpness will probably lean more towards the showcar crisper style of body lines but we have to enhance this to get the full effect.
Yes I know I still have to repair the quarter to roof join as this factory effort is terrible but it’s too hot to weld at the minute😉

Address

208 Basedow Road
Bethany, SA
5352

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 8:30am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Baker Bodyworx posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Baker Bodyworx:

Shortcuts

Share

Category