Gassed Automotive

Gassed Automotive Gassed Automotive- Service, repairs, modification and fabrication for all things Automotive. Exhaust Our mechanical expertise can fix all automotive problems.

Gassed Automotive is your one stop shop for anything and everything Automotive. With more than 40 years experience in Mechanical, Suspension, Exhausts, Fabrication and more, Gassed can handle any job big or small. An oil change or an engine rebuild, Gassed has got it covered. Gassed Automotive have one of only 3 specialised hydraulic wheel repair lathes in Australia. We can fix-

- Gutter rash
- B

uckled or dented wheels
- Cracked or chipped wheels
- Polish or refinish wheels
- Re-barrel multi-piece wheels

We can custom build extractors, turbo manifolds, exhaust systems, roll cages and much more. From daily drivers needing a hole in the muffler repaired, through to a new system for your racecar, Gassed is your destination.

28/08/2026
28/08/2026

Nasty stuff.

Things like cabin, air and fuel filters might not appear on the log book servicing schedule at the right time.

That's why we always check and schedule replacements as needed, rather than just going off the manufacturer's "cost reduction" log book service schedule.

Look.. I'm not saying that this isn't the ideal environment for your expensive OEM turbo.. But it probably didn't help m...
25/08/2026

Look.. I'm not saying that this isn't the ideal environment for your expensive OEM turbo..

But it probably didn't help much!

24/08/2026

Fingers don't go there.

And this really should have a cover - but someone's conveniently forgotten to fit one here!

On the list it goes.

What are these?! Wheels for ants? 10" wheels are an absolute jerk of a thing to fit- but we get it done!
23/08/2026

What are these?! Wheels for ants?

10" wheels are an absolute jerk of a thing to fit- but we get it done!

3d printed (ABS plastic) transmission cooler line supports are a ripper! Designed and printed in house to use stainless ...
22/08/2026

3d printed (ABS plastic) transmission cooler line supports are a ripper!

Designed and printed in house to use stainless fasteners, space the lines and isolate from vibration.

These will hold all the custom trans lines in place on Lance's LS1 powered HR.

Thanks to a mouse nest and some chewing- this V6 Hilux was in for an injector loom repair, a set of plugs and new knock ...
21/08/2026

Thanks to a mouse nest and some chewing- this V6 Hilux was in for an injector loom repair, a set of plugs and new knock sensors.

With the knock sensors and loom being buried underneath the inlet plenum, inlet manifold and coolant pipes, its an absolute mission to get in there.

Made all that more fun thanks to layers of poo, bits of dead insect and lots of other random rubbish.

Another bit of Lance's LS1 HR Holden. We struggled to find real-estate for the compact PWR transmission cooler up front....
21/08/2026

Another bit of Lance's LS1 HR Holden.

We struggled to find real-estate for the compact PWR transmission cooler up front.

So the decision was made to work it into the front of the engine bay, with flow from behind the grille and out via slots in the inner guard section.

This little alloy shroud also acts as the mounting hardware for the whole shebang.

21/08/2026

Wobbly wobble.

These eye bushes had copped an absolute thrashing behind 450 odd horsepower of the blue oval variety.

Address

4/9 Apprentice Drive
Berkeley Vale, NSW
2261

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 6:30pm
Friday 8:30am - 5pm
Saturday 9am - 12pm

Website

Alerts

Be the first to know and let us send you an email when Gassed Automotive posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Gassed Automotive:

Shortcuts

Share

Category