6FIVE Industries

21/08/2026

One of our return customers asked if we would fit there new tray and canopy as there is no fitter available in our area for this company.

Of course we put our little touch on it by adding power to the canopy & finishing of the little things like water tap for the header board tank, Cleaned up some rear end wiring and added resistors for the indicators.

We love return customers.
Thank you for choosing 6FIVE Industries

21/08/2026

Book in and get one fitted to your vehicle with 6FIVE Industries

18/08/2026

Did you know we can press bushings and bearings for you!
We also repair CV shafts & centre bearings.

Drop in and see Clayton at
Shed 2/ 29 laidlaw drive delacombe

18/08/2026

This customer came to us with a tray he had recently fitted needing alignment.
We squared & levelled it up. We also found that no washers had been used to mount the tray to the chassis that would resulted in the bolts pulling through the mounts. Good way to ruin your day.
Be sure if your fitting things yourself you use the correct hardware.

18/08/2026

This 2014 mazda cx5 came into us lacking low down power. While diagnosing we found one of the turbo's had dropped its internal valve. We also found the pipe for the boost reference was blocked which would have caused over boosting resulting in a head gasket leak.

13/08/2026

Did you know that we Supply & Ultra Vision Lighting

11/08/2026

Hear a noise? Feel a vibration?
Don't wait till it's too late

27/07/2026

SALE / SALE / SALE
Limited time offer - Don't miss out

Mechanical, fabrication, 12-volt systems and accessories, brakes, services, 4x4 fit outs

27/07/2026

Here is one of our great customer Dave's beautiful 1980 c20 we done some work on getting it ready for Victorian registration

27/07/2026

Did you know we supply & fit 4x4 accessories in house. This customer wanted to upgrade their existing lights and winch with something quality but budget friendly. The owner went with the Maxitrax 9 inch LED driving lights and a Drivetech 12000lb winch.

We can fit customer supplied accessories or supply and fit something that suits your requirements and budget.