MODOSPORT

29/07/2026

Quiet on social media feed, but busy behind the scenes!
We’ve been working non-stop on innovative projects and even sat down for an interview to talk about it.
Stay tuned!

21/12/2025

Independent dual extrusion head for fast 3D Printing and easy support removal on a large-scale composite part for engine bay.

20/12/2025

🇬🇧 Large-scale and bi-material 3D printing.
A composite part for engine bay.

🇵🇹 Impressão 3D de grande escala e em bi-material.
Peça em material compósito para compartimento do motor.

10/12/2025

Top-Tier Quality Wiring Harness for conversion to 6 BAR MAP sensor on VW/Audi/Seat/Skoda 1.9 and 2.0 TDI.

Ensure that your high-boost readings are accurate and durable with our outstanding converter harness!

➡️ The conductor wires are braided in a circular pattern, to uniformly distribute the stress from any pull or twist, and to reduce Electromagnetic Interference.

➡️ Wires are wrapped in a braid thermal sleeve for external protection, resistant to bending, wear, and cuts.

➡️ The wire terminations at the plug connectors are finished with heat-shrink tubing featuring internal resin. It's a pull-proof fixation of the cable to the connectors, ensuring a total connection robustness and a complete watertight seal against water and humidity.

23/04/2025

🇬🇧 FuelTech FT450 ECU Mockup. A useful tool for engineers and development teams. It simulates a real physical ECU, allowing to check positioning, connections and mounting bracket, as well as ensuring that the real ECU will not be damaged before proceeding with the final installation.
Check it in bio ⬆️

🇵🇹 Modelo ECU FuelTech FT450. Uma ferramenta útil para engenheiros e equipas de desenvolvimento. Simula a ECU física real, permitindo verificar o posicionamento, as ligações e o suporte de montagem, além de garantir que a ECU real não será danificada antes de da instalação final.
Podes saber mais na bio. ⬆️

05/12/2024

For those who have been asking how this project is going, below you will find some of the steps that have been completed and what is to come!

✅Intake runner + Fuel injector
✅TBI + TPS + MAP + IAT + IACV
✅Velocity stack + Air filter
✅Ignition rotation sensor
✅Ignition coil
✅Fuel pump + Filter
✅Fuel surge tank
✅Fuel pressure regulator
➡Wiring harness + eletronic components
➡Runnig test



🏁

31/08/2024

31/07/2024

🇬🇧 An extra protection for kart engines! Magnetic oil drain kit and magnetic oil dipstick kit with oil level marks.

🇵🇹 Uma proteção extra para motor de kart! Kit parafuso do bujão de óleo magnético e kit vareta de óleo magnética com marcação do nível do óleo.

🏁

27/06/2024

🇬🇧 MODOSPORT Exhaust Fl**ge kit for Kart 4-stroke 390cc, 420cc, 440cc, 460cc.
All parts in stainless steel (except gasket) to keep excellent quality of the kit.

We are developing more kart parts! Keep in touch!

🇵🇹 Kit de Falange de Escape MODOSPORT para Kart 4 tempos 390cc, 420cc, 440cc, 460cc.
Todas as peças em aço inox (exceto a junta), para manter a excelente qualidade do kit.

Estamos a desenvolver mais peças para kart! Fique ligado!


🏁 **ges **ge **ge