Shedtune

19/03/2026

Final part of the Lambretta RB250 engine build and it’s safe to say Dom’s going to be a very happy bunny 🐰🔥

In this episode we finish off the top end, make a few tweaks to the head dowelling, and take a closer look at the stuffer setup. We also dive into clutch and gearing choices… all while trying not to have a complete mental breakdown 😂

It’s been a proper build from start to finish — let us know what you think!

🎥 Watch the full video here: https://youtu.be/48F8WLR_-vo

The final part (8) of our Tuned RB250 engine build… at least until we get it into a frame and onto the dyno! 🔧🔥In this episode we wrap up the engine by sea...

14/03/2026

Part 7 of the Tuned RB250 build and there’s a lot packed into this one.
Homemade head gasket, piston windows, and a few chemical metal fixes along the way. Not everything goes smoothly, but that’s all part of the process.
Have a watch and see how the build is coming along.

https://youtu.be/VksDAkBibUk

Welcome to Part 7 of the Lambretta RB250 Engine Build 🛠️After getting the barrel back from Langcourts following Nikasil re-plating, we discovered a few issu...

11/03/2026

Think you know how a cylinder re-plate is done? 🤔

I visited Lancourts to get my RB250 barrel re-plated and got a full behind-the-scenes tour of the Nikasil cylinder plating process. What I learned was very different from what you see people say on social media. Forget the myths — watch, listen, and learn. 🔧🔥

RB250 Nikasil Replating Process | Inside Langcourts Cylinder ReplatingI had to send my RB250 cylinder barrel off for Nikasil replating at Langcourts, so I th...

01/03/2026

🛠️ Lambretta RB250 Engine Build Part 5 | Rear Hub, Layshaft & Gearbox Assembly

Welcome to Episode 5 of the RB250 Engine Build!In this episode we move to the back end of the engine and tackle several key jobs:🔧 Rear Hub Bearing – Heated...

24/02/2026

New Ramp Refurbished

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

12/02/2026

The last video from the startup hall at Newark Winter Classic 2026. Henry Cole and Steve Plater meet Shedtune 69! 😎👍

Back in the startup hall at the 2026 Newark Winter Classic Bike & Scooter Show, and this time we’ve brought out the big gun.Shedtune 69 is a full-on sprinter...

12/02/2026

The original Shedtune 69…. Should we bring it back and put it on the road again?

08/02/2026

We put the NEW Skickies/Casa Eccentric Brake Pins to the test 👀🔥 Game-changer or just hype? Hit play and see what we really thought.

If you ride a Lambretta, you’ll know the rear brake has a reputation for being pretty rubbish 😅 — mostly down to the design and how the brake shoes interact...

29/01/2026

We are cooking on gas,... part 3 of the TUNED RB250 build is on line now!

Welcome to Part 3 of my Lambretta RB250 Engine Build Series! 🛠️In this episode, we dive into the next stage of our RB250 tuned engine build, fitting key com...

27/01/2026

Part 2 of 5he RB250 build is now live! Hopefully it will make you smile and you may even learn something… I have

Welcome to Part 2 of my Lambretta RB250 Engine Build Series! 🛠️In this episode, we tackle the next stage of the RB250 tuned engine build — finishing off tho...