Nupen Welding & Restorations

Nupen Welding & Restorations Built with pride🇺🇸👨🏻‍🏭

Northern Virginia’s source for custom metal fabrication, welding repairs, rust repair, classic car & truck restoration, industrial fabrication, hand railings, gates, and custom-built metal projects.

This oil pan came out fantasticThank you as always for the business The Alchemy Camaro !!
09/05/2026

This oil pan came out fantastic

Thank you as always for the business
The Alchemy Camaro !!

These MASSIVE industrial gates just got wrapped up for the soon to be LARGEST solar panel factory in the country. We def...
09/04/2026

These MASSIVE industrial gates just got wrapped up for the soon to be LARGEST solar panel factory in the country.

We definitely stepped out of our comfort zone on this one with the full installation but now we have the knowledge & will power to make the next set go even smoother & faster.

These gates were measured out on site, fully designed on cad to the clients spec, built all in house, hot dipped galvanized by our friends at southern galv CO then installed by us!

Stepping out of comfort zones can be nerve racking but so rewarding. With aligning the machine rental /concrete in the same day all while beating the weather was nothing but shy of challenge.
I’m honestly satisfied that we got the opportunity to do it all from start to finish.

Fast forward to 3 weeks later & the grass is growing back & it looks like we were never there👊🏼😎

THANK YOU MSOLAR for the business we look forward to seeing your factory up & running soon!

A late evening repair for our friends at badger!! This water neck was leaking bad & is actually one of the things on the...
08/18/2026

A late evening repair for our friends at badger!! This water neck was leaking bad & is actually one of the things on these trucks that is never used. It was easier to get rid of it & just plate it off. Our burn table in the shop made quick work of those 6” circles!
Sure came out awesome👊🏼

Our awesome friends from Fauquier Automotive called this past week & was in a tight spot needing this part made asap… I ...
08/08/2026

Our awesome friends from Fauquier Automotive called this past week & was in a tight spot needing this part made asap… I called multiple people/machine shops to replicate this part for Mr. Tudor & unfortunately no one could help with the time crunch we were under. So like always, we came up with a solution for the problem & got creative. After a few hours we had another replicated part & was able to get it to Mr. Tudor the same day!

Thank you as always Mr. Tudor for the opportunities you bring us!!! This was a fun little challenge

Finally got around to upgrading the water pan on our burn table! We made it a few inches deeper on both sides to help ...
08/05/2026

Finally got around to upgrading the water pan on our burn table! We made it a few inches deeper on both sides to help contain more of the water while the torch is making a pass.

A local shop with a fiber laser cut the DXF files we provided and helped bend the 5-foot side panels. From there, we TIG welded everything together, and it turned out awesome.

It looks great, & works even better.

I just can’t get over the ride height & stance she’s nasty 🥵
08/02/2026

I just can’t get over the ride height & stance she’s nasty 🥵

Alittle bit of race car action this week has been almost like therapy! This type of work is so enjoyable. Figuring out g...
07/28/2026

Alittle bit of race car action this week has been almost like therapy! This type of work is so enjoyable. Figuring out geometry & watching the parts pile get smaller is rewarding.

I had to get creative with setting the motor in the car since we don’t have the luxury of a frame table … (yet) … the chasi of the body is currently sitting on blocks with shims. This is actually mimicking ride height with no load on the suspension. Then we got the rear 4 link set up & positioned correctly. This helped find the crank center line, once that was taken care of we got the motor mocked up with our leveling feet. Now it’s time for motor/trans brackets to be laser cut out 😎

Started the morning in Baltimore picking up our custom industrial gates from galvanizing. Huge thanks to Southern Galvan...
07/18/2026

Started the morning in Baltimore picking up our custom industrial gates from galvanizing. Huge thanks to Southern Galvanizing! they did an outstanding job, and these gates are now one step closer to installation.

From there, I headed up to Pennsylvania to stock up on chromoly tubing so we can hit the ground running on our race car fabrication projects next week.

Every mile, every material pickup, and every project is another step toward growing Nupen Welding & Restorations. We’re excited to keep expanding into industrial fabrication, custom metalwork, and race car fabrication!

This custom frog themed bench turned out beautiful and was the perfect finishing touch for this little church tucked awa...
07/18/2026

This custom frog themed bench turned out beautiful and was the perfect finishing touch for this little church tucked away on a back road in Markham, VA. It was a pleasure bringing this project to life from start to finish!

Thank you, Ms. Karen, for trusting Nupen Welding & Restorations with this special piece. I truly hope it brings joy to the children and adults of the church for many years to come.

Custom fabrication is what we love to do.
turning ideas into lasting pieces that can be enjoyed for generations.

Here’s a photo dump of a bunch of mobile tig welding repairs we have done over the past several weeks! We absolutely lov...
07/15/2026

Here’s a photo dump of a bunch of mobile tig welding repairs we have done over the past several weeks! We absolutely love & enjoy the mobile work!! keeping big trucks on the road is rewarding to us!

If you’re company & trucks is in need of assistance of welding repairs or fabrication please reach out. We are the ones that will do what it takes to keep the wheels rollin.

703-966-5053

Address

2329 Hoffman Circle Unit C Warrenton Va 20187
Warrenton, VA
20187

Opening Hours

Monday 8:30am - 5:30pm
Tuesday 8:30am - 5:30pm
Wednesday 8:30am - 5:30pm
Thursday 8:30am - 5:30pm
Friday 8:30am - 5:30pm

Telephone

7039665053

Website

Alerts

Be the first to know and let us send you an email when Nupen Welding & Restorations posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Nupen Welding & Restorations:

Shortcuts

Featured

Share