Skip's First Gens

Skip's First Gens I am a retired Commercial Fisherman. You might have seen me in an Arby's commercial back in 2016 "Arby's Reel Big Fillet" as "Captain Skip".

I am focused primarily on doing restomod work on first generation Camaros.

08/28/2025

1968 RS/SS Pro Touring Camaro fully tuned and ready for a long range test drive.

08/26/2025

First test drive today. There are some programming issues and some air/fuel adjustments to be done but it lays rubber easily!!

08/18/2025

Yes it runs ! Many small things left to do but a modern computer controlled engine in a 57 year old car…

It runs, it moves and it stops. Still a few bugs and details but it is on the home stretch for sure. I will be listing i...
08/08/2025

It runs, it moves and it stops. Still a few bugs and details but it is on the home stretch for sure. I will be listing it as soon as it is completed in about two weeks or less.

07/26/2025

Grill is done so only 1 million and 2 things left…🤣🤣🤣

07/24/2025

I swapped cheaper and better actuators from a C-3 Corvette. The travel is almost identical between the Camaro and Corvette actuators and the Vette’s are cheaper, better and I only had to fabricate two parts.

Closer every day! A few more wires and it will be ready to fire up! The months of work have been daunting but also rewar...
07/06/2025

Closer every day! A few more wires and it will be ready to fire up! The months of work have been daunting but also rewarding. $86,500 and you can drive it home…

I just want to remind everyone that as a Ridetech Dealer I can sell even below my cost if I choose, I just cannot advert...
06/16/2025

I just want to remind everyone that as a Ridetech Dealer I can sell even below my cost if I choose, I just cannot advertise the actual discount or prices. I became a dealer to get my suspensions at a discount and I need to reach a threshold every year to maintain my dealer status. If you need anything from Ridetech it ships directly from them with tracking FOR FREE. Please check with me and see if in fact I am priced lower than anyone else, thanks...

Have the Camaro at ride height and drivers side fender hung. Billet hood hinges are are set for the hood fitting process...
06/13/2025

Have the Camaro at ride height and drivers side fender hung. Billet hood hinges are are set for the hood fitting process. Stand alone harness and fuel pump control next and fluids topped off it will be ready to fire up.

This is the stainless steel bracket I made for the dipstick. With the swap oil pan the dipstick gets moved to the driver...
05/24/2025

This is the stainless steel bracket I made for the dipstick. With the swap oil pan the dipstick gets moved to the drivers side. Oil filter pre filled and five quarts in the pan stick reads right in the middle…😎

Address

Vancouver, WA
98664

Website

Alerts

Be the first to know and let us send you an email when Skip's First Gens posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Skip's First Gens:

Shortcuts

Share

Category